I nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods
Goto: Forum List•New Topic•Search•Log In Or Register
Current Page: 1848 of 1895
Subject Views Posts  Started By  Last Post 
Oops!!! 954  5  Kelly Verge  03/05/2002 05:08PM 
Last Post by Kelly Verge
St. Croix link 802  3  Ray Alston  03/05/2002 04:22PM 
Last Post by Karen Hapka
striping 881  2  joe buck  03/05/2002 03:04PM 
Last Post by Tom Kirkman
Steelhead/Salmon Rod and Reel? 1,821  6  Peter Bunting  03/05/2002 01:59PM 
Last Post by Gene Maxson
Rod drying speed and temp?? 1,249  7  Phil D'Avanzo  03/05/2002 01:19PM 
Last Post by Phil D'Avanzo
Repairing reel seat 1,647  3  Dale Gray  03/05/2002 11:16AM 
Last Post by John Britt
Fuji LC guides 3,275  4  Felix Cartagena  03/05/2002 10:20AM 
Last Post by Felix Cartagena
G Loomis IMX 1,027  2  Peter Malessa  03/05/2002 08:25AM 
Last Post by Dick Thurston
Butt cap 1,029  3  Jon Jeter  03/05/2002 05:25AM 
Last Post by Harold Tanner
Surf Rods 1,047  8  Don Kelly  03/05/2002 12:35AM 
Last Post by Walter Young
Weaving Books? 916  8  Don Kelly  03/05/2002 12:26AM 
Last Post by Kent Ryan
Finishing over decals 889  8  Lynn Huffman  03/05/2002 12:10AM 
Last Post by Dick Thurston
Sanding coated wraps? 970  6  Dan Hermann  03/04/2002 11:49PM 
Last Post by Dick Thurston
The 10,000th post has been made. 1,384  11  Tom Kirkman  03/04/2002 11:32PM 
Last Post by Tony Hill
Concept Guide Taper? 1,250  11  Joe Brooks  03/04/2002 11:20PM 
Last Post by Joe Brooks
Fly guides on Spinning Rod 1,203  5  Andrew Eaton  03/04/2002 11:15PM 
Last Post by Rich Garbowski
reel seat 1,077  6  chuck lagrange  03/04/2002 11:01PM 
Last Post by Dick Thurston
Penetrating Resin 3,145  11  Blaine Lusk  03/04/2002 10:54PM 
Last Post by Alberto
Fighting grip 1,182  4  Jon Jeter  03/04/2002 10:07PM 
Last Post by Dick Thurston
color preserver 868  3  Bob Bogard  03/04/2002 09:49PM 
Last Post by William Colby
"Aye Aye" 895  3  Blaine Lusk  03/04/2002 09:43PM 
Last Post by Hugh Miller
Lamiglas Blank 1,699  3  Mike Brown  03/04/2002 07:48PM 
Last Post by Mike Brown
Advantages of Spiral rods? 1,320  8  Randie Putnal  03/04/2002 06:48PM 
Last Post by Ron Schneider
One weight Fly rod 1,974  8  Felix Cartagena  03/04/2002 06:02PM 
Last Post by Andy
Collector/stripper/additional guide... after the test. 1,074  1  Serge Thomas  03/04/2002 05:50PM 
Last Post by Serge Thomas
Gudebrod products 1,300  2  Marcel Charest  03/04/2002 05:15PM 
Last Post by Andy Snedden
Will we have pop-ups? 1,264  12  Dave Joseph  03/04/2002 03:17PM 
Last Post by Jim Johns
Rodmaker Magazine online ? 3,005  10  Peter Mulbjerg  03/04/2002 01:37PM 
Last Post by Tom Kirkman
Sponsor link active 1,038  1  Tom Kirkman  03/04/2002 01:27PM 
Last Post by Tom Kirkman
Bunker spoon rod 1,497  5  Tom Smith  03/04/2002 01:11PM 
Last Post by Capt Neil Faulkner
Equal angle quandary 1,149  2  Bob Bogard  03/04/2002 12:36PM 
Last Post by Tom Kirkman
epoxy on bamboo wraps 1,318  3  Angelo Randaci  03/04/2002 11:31AM 
Last Post by Tom Kirkman
Split Cane 1,209  1  Kelly Verge  03/04/2002 10:21AM 
Last Post by Kelly Verge
I LOVE the Gudebrod color Preserver! 1,014  6  Tony Hill  03/04/2002 08:08AM 
Last Post by Tony Hill
signing your work 1,486  2  JP Gaudreau  03/04/2002 07:27AM 
Last Post by Matt Davis
Good Alcohol Lamp 1,935  12  Dick Zrudsky  03/03/2002 10:33PM 
Last Post by Bill Doherty
New Fishing Tackle-New To Me 1,075  4  Ellis Mendiola  03/03/2002 10:00PM 
Last Post by Mike Ballard
Surf Rod Modification 965  2  Ron Long  03/03/2002 09:15PM 
Last Post by Mike Ballard
syringes fall apart 1,223  4  Dean Veltman  03/03/2002 05:36PM 
Last Post by Tom Kirkman
One last question...Spinning rods in general 1,205  6  Don Kelly  03/03/2002 12:39PM 
Last Post by Rich Garbowski
Quick note on email addresses 1,346  8  Tom Kirkman  03/03/2002 12:10PM 
Last Post by Tony Hill
wrapping thread too tight 2,189  6  Kitty O'Neil  03/03/2002 10:27AM 
Last Post by Dick Thurston
Blank Suggestions 1,083  3  Ed Kindervater  03/03/2002 10:06AM 
Last Post by Dwayne Rye
removing rod finish 974  2  David Hoover  03/03/2002 09:41AM 
Last Post by Tom Kirkman
10,000 post prizes- Thanks Richard's Rod and Reel! 1,727  3  Tony Hill  03/03/2002 08:25AM 
Last Post by Tony Hill
Spinning rod and intersect point question 988  5  Tony Hill  03/03/2002 08:21AM 
Last Post by Tony Hill
rodbuilders 984  1  chuck lagrange  03/03/2002 01:05AM 
Last Post by chuck lagrange
I just finished my first rod! 1,051  3  Dean Veltman  03/02/2002 10:23PM 
Last Post by Hugh Miller
Forhan Locking Wrap 958  4  Ray Zarychta  03/02/2002 09:37PM 
Last Post by Ray Zarychta
Allstar Salmon/Steelhead blanks ? 816  3  Joe Hart  03/02/2002 07:28PM 
Last Post by Dick Thurston
Current Page: 1848 of 1895
Options:
Webmaster