nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

ICRBE 2020
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BRC Rods
Bingham Enterprises
Cork Specialties LLC
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
REC Components
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
The Rod Room
Trondak U-40
Utmost Enterprises

Current Page: 3 of 1412
Subject Views Posts  Started By  Last Post 
Medium for colored powder pigments 311  Tom Harder  03/12/2020 01:04PM 
Last Post by Dan Ertz
Minima stripper size for musky rod? 313  John Shear  03/12/2020 07:51PM 
Last Post by Lynn Behler
2 piece Rods    Pages: 1 2 808  32  David Hartman  03/15/2020 05:22PM 
Last Post by Phil Ewanicki
Sturgeon Rod Blank Suggestions 246  Matt Hehn  03/15/2020 04:31PM 
Last Post by Aleks Maslov
Arctos 10 Ft 9" for 3 wt 228  david taylor  03/09/2020 11:44PM 
Last Post by david taylor
Mixing cups 570  12  Tom Harder  03/11/2020 01:42PM 
Last Post by Tom Harder
Should a fully loaded rod differ? 516  19  Matthew Furman  03/16/2020 03:26PM 
Last Post by Phil Ewanicki
Flexcoat Variable Speed finishing motor 511  14  Herb Ladenheim  03/10/2020 07:49PM 
Last Post by Herb Ladenheim
MRB Gatheing May2, 2020 287  Dow Whetstone  03/10/2020 12:17AM 
Last Post by Jonathan Hotham
Rod tip adhesive? 677  17  Tim Shaffer  03/11/2020 05:44PM 
Last Post by John Cates
blanks, source, availability 741  15  Phil Ewanicki  03/09/2020 06:23PM 
Last Post by Lynn Behler
Carbon fiber question 512  Steven Corvin  03/07/2020 08:46PM 
Last Post by Kendall Cikanek
reversing motor on ALPS wrapper 411  Michael Ward  03/08/2020 11:00AM 
Last Post by roger wilson
MHX Blank for Kingfish/MahiMahi 289  Mike Clements  03/06/2020 05:27PM 
Last Post by Robert A. Guist
CP dry time 441  10  Glenn McMurrian  03/08/2020 03:02AM 
Last Post by Phil Erickson
Winding check with a thread underwrap 394  Mike Gabbay  03/06/2020 01:09PM 
Last Post by Lance Schreckenbach
Thread issue maybe, I guess 458  Lynn Behler  03/08/2020 11:04AM 
Last Post by roger wilson
Browning Silaflex Wrap colors 298  John Dicks  03/05/2020 10:24AM 
Last Post by Bill Hickey
Fly seat for centerpin 259  Mark D Schulte  03/05/2020 11:52PM 
Last Post by Ron Weber
Statistics state you should always bet on black... 502  Chris Feagan @ American Tackle  03/04/2020 02:36PM 
Last Post by Chris Feagan @ American Tackle
Hitena at Fred Hall Show Long Beach this week 281  Hitena USA  03/07/2020 01:05PM 
Last Post by David Miller
Deep water big game rod 352  Peter Genna  03/04/2020 09:30AM 
Last Post by Phil Ewanicki
Microwave guides, long rod 529  10  Levi Bakker  03/12/2020 07:58PM 
Last Post by Jean Scurtu
Corona virus and rod parts    Pages: 1 2 1,050  24  gary Marquardt  03/05/2020 10:48PM 
Last Post by roger wilson
For Colby Witherow 247  Lynn Behler  03/03/2020 12:58AM 
Last Post by colby witherow
Batson Enterprises at Fred Hall Show Long Beach, CA this Week 253  James Taylor  03/02/2020 01:36PM 
Last Post by James Taylor
VisualWRAP Printed Index Books 261  David Boyle  03/01/2020 09:35PM 
Last Post by David Boyle
Rubber grommets as winding checks? 533  Jason Haney  03/04/2020 08:53PM 
Last Post by Christopher Bohr
Red anodized hood for ecs 265  Thomas Kaufmann  03/01/2020 05:31PM 
Last Post by Thomas Kaufmann
A thank you to Roger Wilson 427  Jamie Midgley  03/02/2020 03:49AM 
Last Post by Jay Dubay
hooded spinning seat 433  Mike Laver  03/01/2020 03:24PM 
Last Post by Mike Laver
United composites us65XXOS question 276  jim payne  03/01/2020 03:26AM 
Last Post by Spencer Phipps
Tip top slightly large 474  Mike Gabbay  03/04/2020 11:23AM 
Last Post by Tom Harder
ICRBE follow up 355  David Boyle  02/28/2020 09:56PM 
Last Post by David Boyle
Cork rear split grip 458  Rick Shaffer  02/29/2020 10:20AM 
Last Post by Pat Barnard
Pac bay revolution 409  Ricky Fleming  02/29/2020 11:15AM 
Last Post by Spencer Phipps
><> THE FUTURE IS HERE <>< 601  Don @ American Tackle  03/03/2020 12:48AM 
Last Post by Kendall Cikanek
Minima4/ snake guide weights 258  Dan Rees  02/28/2020 09:34PM 
Last Post by Tom Kirkman
Altering REC Titanium Snake Guide 323  Tom Harrigan  03/01/2020 09:28PM 
Last Post by Drew Pollock
WHAT DID YOU MISS? 407  Don @ American Tackle  02/28/2020 10:08AM 
Last Post by Don @ American Tackle
For Jim Ising 393  Robert A. Guist  02/28/2020 07:25PM 
Last Post by Lynn Behler
NFC EFX grip winding checks? 424  Jason Haney  03/01/2020 08:26PM 
Last Post by Karl Witherow
2 Piece 9'6 8wt 287  Al Cournoyer  02/29/2020 09:29AM 
Last Post by ben belote
Steel head Acid Wrap 247  Al Cournoyer  02/28/2020 06:57AM 
Last Post by Al Cournoyer
Stand-up Tuna Rigs 193  Al Cournoyer  02/28/2020 06:51AM 
Last Post by Al Cournoyer
Acid Wrap Guide Layout 327  Will Cooper  02/28/2020 11:21PM 
Last Post by Mark Talmo
Reel seat distance from stripper guide 396  10  Dennis Herold  02/29/2020 08:56PM 
Last Post by Dennis Herold
Introduction and Shop Equipment - Lathes, Reamers? 353  Dan Martin  02/28/2020 03:21PM 
Last Post by John Cates
WOW- WHAT A SHOW 368  Don @ American Tackle  02/27/2020 09:44PM 
Last Post by Tom Kirkman
epoxy @#$%& 469  steven church  02/28/2020 08:45AM 
Last Post by steven church
Current Page: 3 of 1412