SPONSORS
![]()
2025 ICRBE |
Acrylic rods for handles
Posted by:
Jeff Leonard
(---.chcoilx1.pop.starlinkisp.net)
Date: June 10, 2024 05:44PM
I have some clear acrylic rods I would like to use for some handles and wonder how to tell if they are cast or extruded? Muskyfsh Re: Acrylic rods for handles
Posted by:
Tom Kirkman
(Moderator)
Date: June 10, 2024 09:45PM
RodMaker did an article on this awhile back. For now, you'll find out the instant you attempt to turn one. One will shatter and one won't.
................ Re: Acrylic rods for handles
Posted by:
Robert A. Guist
(---.res6.spectrum.com)
Date: June 11, 2024 11:18AM
Here Ya Go!
A list of articles in RodMaker Magazine about "acrylics". Volume/Issue.........................Article.................Author................Page. 10/3 Acrilics; Notes on Casting/Insert Resins. By Joe Emig. 36 23/5 Acrylic And Composite Wood Grips By Walter Reyberg. 24 13/6 Acrylic Handles, They Are Crystal Clear. By Tom Kirkman. 10 20/4 Acrylic Luster, Sanding VS Buffing. By Tom Kirkman. 10 18/1 Acrylic Parts, Turning on a Wood Lathe? By Tom Kirkman. 16 19/6 Acrylic Turning Stock, Pour Your Own. By John Thibault. 16 14/4 Acrylic Turning Tips. 19 Have Fun. Tight Wraps & Tighter Lines. Re: Acrylic rods for handles
Posted by:
Jeff Leonard
(---.chcoilx1.pop.starlinkisp.net)
Date: June 11, 2024 10:45PM
Thanks for your input all. Muskyfsh Sorry, only registered users may post in this forum.
|