I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2018 Expo
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
Bingham Enterprises
Canada Rodbuildersupply
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
DBlue Fishing
Decal Connection
DONART
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rod Components USA
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Current Page: 11 of 1367
Subject Views Posts  Started By  Last Post 
Thread colors. 646  Steven Bloomfield  03/14/2018 07:28AM 
Last Post by Michael Danek
25% Off Multi-Option Rod Kits @ Mud Hole 437  Mud Hole Custom Tackle  03/13/2018 02:14PM 
Last Post by Mud Hole Custom Tackle
what guides 608  Leonard Letukas  03/14/2018 10:57AM 
Last Post by Norman Miller
Guide Weight 592  Brett Unrau  03/20/2018 02:01PM 
Last Post by Phil Ewanicki
RF Elite 806 409  Roger Rierson  03/16/2018 10:39PM 
Last Post by Roger Rierson
drawings for fly rod grips ?? 487  Bill Sidney  03/13/2018 07:58AM 
Last Post by Arnot Hulth
Rod shipping 583  11  Robert Mckee  03/13/2018 03:51PM 
Last Post by roger wilson
ask a pro    Pages: 1 2 1,305  28  Phil Ewanicki  03/14/2018 12:39PM 
Last Post by Phil Erickson
Suggestions on first build 617  Gary Frank Gore  03/16/2018 11:06PM 
Last Post by Gary Frank Gore
Guide Spacing for MHX ST1263 build 406  rick humphrey  03/11/2018 01:40PM 
Last Post by Bill Sidney
Buttcaps 551  Kevin Wright  03/11/2018 03:06PM 
Last Post by Joe Vanfossen
building my own rod wrapping unit 807  16  Jeremy Hixson  03/18/2018 12:11PM 
Last Post by Jeremy Hixson
PAC BAY #14 CSBBG CARBIDE GUIDES 419  Richard Kline  03/13/2018 01:49PM 
Last Post by Don @ American Tackle
Arctos blanks 600  Scott Giaquinto  03/15/2018 01:55AM 
Last Post by John Van Emmerik
The Unknown Blanks 761  Larry Berkovsky  03/10/2018 12:05PM 
Last Post by Spencer Phipps
MHX Elite-x 1,100  14  Steven Corvin  03/22/2018 06:33PM 
Last Post by Del Guile
CRB VeraiblenSpeed Dryer    Pages: 1 2 796  24  Robert Mckee  03/26/2018 01:55PM 
Last Post by Robert Mckee
Guide setup for CTS 8ft 374  Mark Brown  03/09/2018 09:01PM 
Last Post by Mark Brown
Help with guide specs? 569  12  Cutter Smith  03/11/2018 06:33AM 
Last Post by Cutter Smith
First Rod Build 698  19  Robert Ford  03/19/2018 02:02AM 
Last Post by Robert Ford
><> WINNER WINNER <>< 653  Don @ American Tackle  03/09/2018 03:49PM 
Last Post by brian rossi
Clear Coat Finish Reco for Painted Graphite Rod 514  Richard Palmersheim  03/19/2018 07:42PM 
Last Post by Richard Palmersheim
Guide spacing for 10ft 3# CTS Affinite X Nymph rod 449  10  Todd Lattimer  03/09/2018 12:48PM 
Last Post by Herb Ladenheim
St. Croix SCII blanks, 2SW70MF vs 2C70MF 499  Seth Johnson  03/09/2018 07:23PM 
Last Post by David Miller
how to repair small blemishes on decal finish 475  Reggie Sharpe  03/07/2018 03:45PM 
Last Post by Michael Danek
Lami surf rod recommended guides 510  17  Nate Smith  03/23/2018 09:55PM 
Last Post by Nate Smith
REVF 1006-2 blank 388  Christopher Lee  03/07/2018 01:11PM 
Last Post by John Van Emmerik
replacement support rollers 459  Lee Gilbertson  03/13/2018 08:33AM 
Last Post by Michael Danek
Spinnerbait Blank 558  Jay Burns  03/08/2018 06:31PM 
Last Post by Spencer Phipps
*8 weight Build-Guide questions    Pages: 1 2 723  21  John Ondash  03/09/2018 07:18AM 
Last Post by ben belote
Smallest reel seat on the market? 626  Dominic_Donchig  03/19/2018 02:03PM 
Last Post by Geoff Staples
Amber hardener...hastened to be even darker? 403  Raymond Faus  03/06/2018 08:00AM 
Last Post by Tom Kirkman
Syncork 595  12  Paul Willits  03/12/2018 09:20PM 
Last Post by Spencer Phipps
PG questions I couldn't find in past posts 417  Paul Wood  03/06/2018 08:58PM 
Last Post by Paul Wood
Abalone with guides 416  Nate Smith  03/07/2018 08:04AM 
Last Post by Nate Smith
Threadmaster 5 minute epoxy shelf life 471  10  Daren Molina  03/07/2018 10:17AM 
Last Post by roger wilson
spinning reel spool diameter 511  10  Jim Colombo  03/08/2018 12:30PM 
Last Post by roger wilson
XSB802.75 477  Marty Martin  03/05/2018 09:13AM 
Last Post by Roger Rierson
Rod painting. 591  11  Fernando Arellano  03/10/2018 10:30PM 
Last Post by Fernando Arellano
Fish scale wrap question. 535  Daren Molina  03/06/2018 04:31PM 
Last Post by John Shear
VisualWRAP and Windows 10 481  David Boyle  03/06/2018 04:38PM 
Last Post by John Shear
Another microwave guide set up question 531  Daren Molina  03/05/2018 04:56PM 
Last Post by Lynn Behler
Weave came out reversed image? 504  Mark Schuman  03/04/2018 01:18PM 
Last Post by Mark Schuman
ferrule wraps 537  Nicholas Riccardi  03/05/2018 01:18PM 
Last Post by ben belote
Very Narrow Trim Bands 967  10  Eric Egee  03/07/2018 10:18AM 
Last Post by roger wilson
Recoil Guide question 638  13  Larry Berkovsky  03/07/2018 11:28AM 
Last Post by Phil Ewanicki
Help with my forecast dryer 476  darrel odland  03/09/2018 03:21PM 
Last Post by darrel odland
microwave guide setup. 701  10  scott south  03/02/2018 10:18PM 
Last Post by scott south
Looking for Aftco reel seat sleeves 397  Scott Lamb  03/03/2018 11:15PM 
Last Post by Scott Lamb
RS IMMWS 62mxf vs SC 5S63mxf 452  Marty Martin  03/02/2018 07:09PM 
Last Post by Thomas Kaufmann
Current Page: 11 of 1367
Options:
Webmaster