nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

2019 EXPO
CCS Database
Int. Custom Rod Symbol
Common Cents Info
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BRC Rods
Bingham Enterprises
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
Renzetti Inc.
Rougarou Rods
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
The Rod Room
Trondak U-40
Utmost Enterprises

Current Page: 8 of 1390
Subject Views Posts  Started By  Last Post 
Diamond finish thinning 387  Chris Forslund  03/14/2019 08:14AM 
Last Post by Mike Ballard
Travel rod for Golden Dorado 317  Jeremy Wagner  03/14/2019 04:00PM 
Last Post by Bob Ginther
FLY ROD GRIP BORE 378  15  Mark Emaus  03/15/2019 09:15AM 
Last Post by Mark Emaus
Steelhead fly rod 360  13  Mark D Schulte  03/13/2019 11:38PM 
Last Post by Spencer Phipps
Russ Peak Graphite Rods 422  Jack Duncan  03/16/2019 03:58PM 
Last Post by Jack Duncan
Need Advice: Trimming blank from 87 to 85 399  Jason Yu  03/13/2019 11:31AM 
Last Post by Jason Yu
14' surf rod blank 379  16  Scott Dacey  04/16/2019 05:01PM 
Last Post by Wes Christy
Rod Lathe Survey    Pages: 1 2 849  23  Bill Marchisella  03/21/2019 05:03PM 
Last Post by Larry Ohara
4' 6" Ultralight Guide help needed    Pages: 1 2 835  38  Bob Ginther  03/15/2019 04:28PM 
Last Post by Stan Wasik
American flag 417  Paul Luechtefeld  03/13/2019 01:57PM 
Last Post by Paul Luechtefeld
Detroit/St Clair River Vertical Jigging Rod/Blank Suggestions    Pages: 1 2 704  38  Ernie Roberts  03/18/2019 12:54AM 
Last Post by Ernie Roberts
Brand name 533  JODY HAHN  03/11/2019 12:51PM 
Last Post by Phil Erickson
Wooden handles, suggestions for turning, chucking, and drilling 371  13  Anthony Unger  03/11/2019 11:28PM 
Last Post by Anthony Unger
St. Croix = Rodgeeks . Clarity wanted.    Pages: 1 2 1,272  30  Derek Becker  03/13/2019 07:16PM 
Last Post by David Baylor
Epoxy and thread finish    Pages: 1 2 1,210  40  Jacob Nebeker  03/11/2019 10:31PM 
Last Post by herb canter
Fiberglass Wound Rod Blank (First Build) 436  19  Bruno Tymczyszyn  03/14/2019 09:12PM 
Last Post by Bruno Tymczyszyn
Flimsy Rod Tip Section Support for Thead Wrapping 565  13  Mark Talmo  03/11/2019 06:23PM 
Last Post by ron zimmerman
Dipping rod 402  10  JODY HAHN  03/17/2019 03:54PM 
Last Post by JODY HAHN
Grip Finish 435  10  Tim Kipp  03/13/2019 05:26PM 
Last Post by Phil Erickson
Knuckle buster rod 359  Cary foster  03/11/2019 11:42AM 
Last Post by Phil Ewanicki
James Taylor, Batson Enterprises 632  11  David Baylor  03/12/2019 06:07PM 
Last Post by Steve Gardner
Status of new and revised Rod Building Guide? 426  Bob Ginther  03/09/2019 12:52PM 
Last Post by Tom Kirkman
Unsolicited Advice from a Newby 518  12  Bob Ginther  03/10/2019 08:45AM 
Last Post by Tom Kirkman
rod guide weights 409  10  Phil Ewanicki  03/10/2019 05:42PM 
Last Post by Phil Ewanicki
Foward and rear grip length 348  Scott Cohen  03/09/2019 12:16PM 
Last Post by David Miller
Another winn grip question 387  16  Anthony Unger  03/09/2019 12:58PM 
Last Post by Anthony Unger
New Pacific Bay Minima Guides 501  Ron Schneider  03/12/2019 11:40AM 
Last Post by Ron Schneider
Zenaq RG Guide System 379  Alex Kulinsky  03/25/2019 03:27PM 
Last Post by Alex Kulinsky
SiC or NanoPlasma? 581  10  Jonathan Merkel  03/09/2019 05:36PM 
Last Post by Norman Miller
Rod Balance Questions    Pages: 1 2 864  30  Bob Ginther  03/12/2019 08:28PM 
Last Post by David Baylor
Guides for an 8wt CTS build    Pages: 1 2 649  27  John Keough  03/13/2019 02:51PM 
Last Post by Daniel Kerr
><> AMERICAN TACKLE G2 SPLIT SEATS <>< 361  Don @ American Tackle  03/07/2019 06:08PM 
Last Post by Don @ American Tackle
Info session 360  Lynn Behler  03/07/2019 04:17PM 
Last Post by Lynn Behler
Thank You Anglers Worksop!!! 392  Mark Talmo  03/07/2019 11:02PM 
Last Post by Wes Motsinger
Winn grips... Someone sell me on them, im unsure...    Pages: 1 2 3 1,118  50  Anthony Unger  03/11/2019 01:25PM 
Last Post by Anthony Unger
clear coat 348  Robert Desrosier  03/08/2019 03:40AM 
Last Post by Anthony Unger
Ferrules for St Croix fly rod 255  Daniel Kerr  03/07/2019 12:19PM 
Last Post by Bill Sidney
Metallic thread 557  10  darrel odland  03/19/2019 06:20PM 
Last Post by Rick Sankey
Perfect fit Handle 590  13  Stan Wasik  03/09/2019 09:05AM 
Last Post by Bob Ginther
Walleye Jigging Rod 441  Ryan Anderson  03/09/2019 10:14AM 
Last Post by Jay Dubay
Cork Jigs 477  Chad St.Amand  03/06/2019 01:47PM 
Last Post by Bill Marchisella
Mortising Bits 398  Chad St.Amand  03/08/2019 12:45AM 
Last Post by Jacob Nebeker
Applying x flock 361  Zach Moore  03/06/2019 07:20PM 
Last Post by Zach Moore
Need Help Matching Reel to blank 429  Bob Ginther  03/07/2019 12:51PM 
Last Post by Jim Ising
Need help finding a short ultralight blank 388  Scott Degen  03/06/2019 12:56PM 
Last Post by Gary Weber
ICRBE vendor with $5 fly blanks 462  Lee anderson  03/05/2019 08:37PM 
Last Post by Norman Miller
Trolling blanks 358  Brett Mahoney  03/06/2019 09:57AM 
Last Post by Wes Christy
Butt reaming 428  Stan Wasik  03/06/2019 01:00PM 
Last Post by Stan Wasik
Lathe options 414  Chase Killingsworth  03/06/2019 07:27PM 
Last Post by Lance Schreckenbach
50% Off Clearance Blanks @ Mud Hole - Ends 3/6 383  Mud Hole Custom Tackle  03/05/2019 11:47AM 
Last Post by Mud Hole Custom Tackle
Current Page: 8 of 1390