I nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2019 EXPO
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rougarou Rods
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast
Goto: Forum List•New Topic•Search•Log In Or Register
Current Page: 10 of 1395
Subject Views Posts  Started By  Last Post 
Epoxy edge on guides 746  19  Stan Wasik  04/15/2019 12:08PM 
Last Post by John Shear
Lowering or softening a rod's power 464  4  Pat Majeski  04/09/2019 08:09AM 
Last Post by Ron Schneider
Modifying a Liberty blank for a custom drop shot rod??? 415  8  Chris Henry  04/14/2019 05:43PM 
Last Post by Michael Danek
Custom Rod Warranty 578  7  JOHN BURKE  04/13/2019 08:45PM 
Last Post by Lance Schreckenbach
Lathe question 475  7  Jacob Nebeker  04/09/2019 01:26AM 
Last Post by Jacob Nebeker
guide flexibility 426  7  Phil Ewanicki  04/11/2019 01:35PM 
Last Post by Lance Schreckenbach
Cracked cork foregrip 465  10  Josh Hutchison  04/10/2019 10:02AM 
Last Post by Stan Wasik
Color Preserver Suggestion 497  12  Michael Sutheimer  04/12/2019 05:13AM 
Last Post by Michael Sutheimer
Reel Seat Touchup? 324  3  Michael Sutheimer  04/08/2019 09:49AM 
Last Post by Ray Zarychta
HELP TO ID BLANK 333  3  David Parsons  04/08/2019 06:49PM 
Last Post by David Parsons
New builder seeking help 475  8  Chuck Johnson  04/09/2019 05:15PM 
Last Post by roger wilson
Clemens lathe 460  2  Michael Collier  04/07/2019 03:17PM 
Last Post by roger wilson
Loomis nrx guide train 423  5  Jason Gofron  04/07/2019 05:11PM 
Last Post by Phil Ewanicki
Calstar rt80 280  7  gregg Lally  04/08/2019 10:56PM 
Last Post by Chuck McIntyre
Cracked male ferrule 355  9  Robert Ford  04/11/2019 10:20PM 
Last Post by Michael Danek
Size 16 spinning seat arbors - loose fit 482  7  Marc Morrone  04/08/2019 09:56AM 
Last Post by Ray Zarychta
Loose reel seat 541  12  Bill Break  04/07/2019 08:18AM 
Last Post by Bill Break
Fiberglass sleeves 532  15  Mark D Schulte  04/07/2019 10:23AM 
Last Post by ben belote
Fuji Apparel 476  3  Stan Wasik  04/04/2019 05:26PM 
Last Post by Stan Wasik
New! ProWrap Electra Metallic Thread 472  1  Mud Hole Custom Tackle  04/04/2019 12:16PM 
Last Post by Mud Hole Custom Tackle
snake skin tips? 378  5  John Shear  04/05/2019 03:07PM 
Last Post by John Shear
Double Dyed 363  1  Steven Kincaid  04/04/2019 07:28AM 
Last Post by Steven Kincaid
trolling rod build 451  10  sebastian sado  04/08/2019 06:28PM 
Last Post by sebastian sado
I gotta tell someone !!! 1,112  19  David Baylor  04/08/2019 08:40PM 
Last Post by David Baylor
SCANDI BLANK 405  1  Mark Emaus  04/03/2019 04:36PM 
Last Post by Mark Emaus
Low Cost 10 Foot Blanks 466  4  Bryce Burke  04/19/2019 10:06AM 
Last Post by Boden Russell
Online Fly Rod Blank Database 397  8  Seth Johnson  04/07/2019 08:53AM 
Last Post by Mark Emaus
St. Croix Blanks Still Available 665  3  Rodgeeks Rod Blanks  04/03/2019 10:40PM 
Last Post by Thomas Kaufmann
What are your Go-to supplies / Vendors in 2019? 701  11  Joseph Ortiz  04/06/2019 09:03PM 
Last Post by ben belote
thread for bamboo rod 330  4  Bill Moschler  04/03/2019 08:52AM 
Last Post by Jonathan Hotham
CFX composite grips 558  13  John DeMartini  04/04/2019 10:28AM 
Last Post by Spencer Phipps
New Issue 443  1  Tom Kirkman  04/02/2019 02:29PM 
Last Post by Tom Kirkman
Distance of the choke guide 524  12  Johnny Tan  04/04/2019 10:37AM 
Last Post by Norman Miller
St. Croix to MHX/CRB part #s 480  6  Mud Hole Custom Tackle  04/06/2019 09:33PM 
Last Post by Tom Kirkman
Blank Suggestion 8 - 8.5ft 364  7  David Lee  04/02/2019 03:49PM 
Last Post by Robert Drabik
Thread finish bubbles on brush    Pages: 1 2 775  22  Darwin Wong  04/05/2019 07:58AM 
Last Post by ben belote
PG Over Thread Epoxy? 503  10  Mark Talmo  04/22/2019 05:14AM 
Last Post by Anthony Unger
Emerald green blanks? 717  15  JODY HAHN  04/01/2019 07:32PM 
Last Post by Lynn Behler
ZipCast? 514  7  Tom Ciannilli  04/01/2019 12:15PM 
Last Post by Phil Ewanicki
re- epoxy old threadwork 465  5  David MacDonald  03/31/2019 09:10PM 
Last Post by roger wilson
pump vs syringes 569  12  David Parsons  04/02/2019 11:19AM 
Last Post by Paul Darby
Cutting reel seat 444  6  Stan Wasik  04/01/2019 04:14AM 
Last Post by Stan Wasik
Wrong stripper guide on a custom build.    Pages: 1 2 946  29  Mark Danner  04/02/2019 06:35PM 
Last Post by roger wilson
New Inventory 482  1  Steven Kincaid  03/30/2019 12:32PM 
Last Post by Steven Kincaid
RODgeeks gloss only blanks 584  8  Rick Sankey  04/06/2019 03:39PM 
Last Post by Rick Sankey
American Tackle Aero Seats 403  1  Ron Schneider  03/29/2019 01:29PM 
Last Post by Ron Schneider
One Coat Of Threadmaster Lite? 591  18  Robert Nypaver  04/01/2019 03:39PM 
Last Post by John Shear
Logo on Sage Blank 491  13  David MacDonald  03/30/2019 02:33PM 
Last Post by Tom Kirkman
9' 8 weight stripper guide placement 338  4  Seth Johnson  03/30/2019 11:04AM 
Last Post by Herb Ladenheim
Batson Rx4 BP1264f Blank as a spin surf 311  12  Steve Cassick  03/30/2019 11:41AM 
Last Post by Phil Ewanicki
Current Page: 10 of 1395
Options:
Webmaster