nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

2019 EXPO
CCS Database
Int. Custom Rod Symbol
Common Cents Info
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BRC Rods
Bingham Enterprises
Canada Rodbuildersupply
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
Renzetti Inc.
Rod Components USA
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
The Rod Room
Trondak U-40
Utmost Enterprises

Current Page: 5 of 1376
Subject Views Posts  Started By  Last Post 
Running Guide Spacing 10' slow action rod    Pages: 1 2 474  21  Sean Mitchell  10/27/2018 09:00PM 
Last Post by roger wilson
Fenwick SP681 269  Taylor Nelson  10/24/2018 03:57PM 
Last Post by Matthew Paul
Austin Tx. builders....... 307  Brandon Romero  11/04/2018 06:04PM 
Last Post by Brandon Romero
Rainshadow RX6 Series- Thoughts? 407  Jason Le  10/28/2018 09:33AM 
Last Post by Spencer Phipps
Anybody try to order from the Rod Room today ? 396  herb canter  10/24/2018 12:14PM 
Last Post by Bill Sidney
Tigrey 320  ron zimmerman  10/24/2018 12:19PM 
Last Post by Bill Sidney
Hello Everyone 308  Adrian Soto  10/23/2018 12:05PM 
Last Post by Adrian Soto
New Guy Checking In 318  Samuel Church  10/24/2018 09:33AM 
Last Post by Mark Hahn
25% to 75% Off Sale @ Mud Hole 301  Mud Hole Custom Tackle  10/22/2018 02:09PM 
Last Post by Mud Hole Custom Tackle
-- FREE Shipping for OCT from CTS -- 231  Gayleen Pratt  10/22/2018 02:02PM 
Last Post by Gayleen Pratt
SIGN UP !! 254  Don @ American Tackle  10/24/2018 09:52AM 
Last Post by Don @ American Tackle
Expo Exhibitor Update 266  Tom Kirkman  10/22/2018 10:44AM 
Last Post by Tom Kirkman
Rod guides 393  Josh Hutchison  10/23/2018 04:57PM 
Last Post by Michael Danek
ice rod guides 295  Todd Abel  10/22/2018 04:53PM 
Last Post by Todd Abel
SDS. For U40 Permagloss.. 339  Anthony Unger  10/21/2018 11:08PM 
Last Post by Anthony Unger
Your epoxy looks a little dull? 405  Michael Danek  10/24/2018 12:35PM 
Last Post by Michael Danek
Blank Recommendations 453  Robert Ford  10/22/2018 01:05PM 
Last Post by Donald R Campbell
looking for St Croix IGFA 7080 blanks,7ft 80lb stand up 162  Paul Sokolowski  10/21/2018 08:48AM 
Last Post by Paul Sokolowski
Work area setup for beginner 466  11  David Tenney  10/22/2018 05:04AM 
Last Post by herb canter
Anyone making solid carbon fiber blanks?    Pages: 1 2 683  21  Mo Yang  10/30/2018 02:37AM 
Last Post by Mo Yang
Anyone have experience with Northfork Delta Blanks 385  Mark D Schulte  10/21/2018 05:48PM 
Last Post by Thomas Kaufmann
Difficulty Finding a Specific Reel Seat 293  AARON SCHILLER  10/21/2018 09:16AM 
Last Post by brian rossi
New guy seeking foam core grip making info 266  AARON SCHILLER  10/20/2018 08:06PM 
Last Post by David Baylor
Save 20% on Graphite Blanks at TheAnglersRoost.com 222  John Kuehn  10/19/2018 02:59PM 
Last Post by John Kuehn
mix two-element epoxy with phosphoresent stick 379  ATHANASIOS TSOMAKIAN  10/19/2018 06:40PM 
Last Post by Matthew Paul
Cork Burning 419  Brandon Smith  10/18/2018 09:58PM 
Last Post by brian rossi
ProKote Epoxy Finish 467  Jack Duncan  10/20/2018 01:42AM 
Last Post by Drew Pollock
1st coat of finish 437  Keith Terlinden  10/19/2018 10:52AM 
Last Post by Bert Dluhy
Guides and more guides? 500  10  David Tenney  10/21/2018 07:56AM 
Last Post by Kevin Althoff
First build- Point Blank 69mxf    Pages: 1 2 606  24  Brian Cheung  11/09/2018 08:18PM 
Last Post by Ron Beloff
Texalium and Perma Gloss 357  Paul Wood  10/19/2018 12:55PM 
Last Post by Paul Wood
Tip glue and gimbal question for 15kg standup rod. 256  Scott Lawrence  10/17/2018 04:07PM 
Last Post by Scott Lawrence
Having trouble getting a NGC layout right. 384  Scott Lawrence  10/17/2018 05:18PM 
Last Post by Michael Danek
><> ROD BUILDER NEWSLETTER <>< 422  Don @ American Tackle  10/16/2018 04:15PM 
Last Post by Don @ American Tackle
new guy 290  sebastian sado  10/18/2018 10:11AM 
Last Post by John Cates
Get Bit Outdoors - Save 20% Site Wide! Happy Birthday McKenzie! 272  Get Bit Outdoors.Com  10/16/2018 10:42AM 
Last Post by Get Bit Outdoors.Com
Trim band help 516  Dan Rees  10/25/2018 07:07AM 
Last Post by Dan Rees
Off the subject 411  Don Mang  10/19/2018 11:12AM 
Last Post by Bert Dluhy
pull-thru loops 605  18  David Nichols  10/18/2018 09:40AM 
Last Post by Seth Johnson
Guides for rebuild 305  Mark Hahn  10/16/2018 12:05AM 
Last Post by Mark Talmo
50% Off Clearance Blanks - 50 Just Added - @ Mud Hole 353  Mud Hole Custom Tackle  10/15/2018 01:43PM 
Last Post by Mud Hole Custom Tackle
New Guy Saying Hello 277  David Tenney  10/16/2018 08:40AM 
Last Post by David Tenney
1st Rod Build, 3 Weight Epic Fiberglass, What Guide Sizes? 320  10  Ian ODonnell  11/12/2018 09:41AM 
Last Post by Ian ODonnell
Carbon Sleeving    Pages: 1 2 782  29  Tom Harder  12/05/2018 10:01AM 
RodMaker V6,#6 interview w/ Dick Kantner 283  David Garrido  10/16/2018 02:33PM 
Last Post by David Garrido
Blank Selection Criteria 475  11  Mark Talmo  10/17/2018 12:31AM 
Last Post by Mark Talmo
Shu Fly switch rod blanks 359  ron zimmerman  11/04/2018 08:33PM 
Last Post by ron zimmerman
Lathe 531  Mark Brown  10/15/2018 11:35PM 
Last Post by Mark Brown
How many running guides to use? 454  Scott Lawrence  10/14/2018 09:11PM 
Last Post by roger wilson
Saltwater Rod 386  Christopher Ritter  10/16/2018 02:31PM 
Last Post by Christopher Ritter
Current Page: 5 of 1376