SPONSORS
2025 ICRBE |
VooDoo Signature Sac-A -Lait Blank
Posted by:
Steven Paris
(---.138.184.173.dynamic.ip.windstream.net)
Date: April 19, 2024 08:48AM
For those looking for blanks to build Crappie rods on check this blank out from VooDoo rods. I just completed a build on this blank and for me it meets all the criteria I am looking for, length, weight, backbone and price. Thank You VooDoo for putting the time in to develop this blank.
Steven Re: VooDoo Signature Sac-A -Lait Blank
Posted by:
Norman Miller
(Moderator)
Date: April 19, 2024 09:12AM
I agree. Just finished 2 and ordered 2 more. Longer rod blanks used for crappie fishing down here are difficult to find. They are very nice blanks for a very good price.
Norm Re: VooDoo Signature Sac-A -Lait Blank
Posted by:
Jeffrey Bersuch
(---.biz6.spectrum.com)
Date: May 24, 2024 04:09PM
I hope yall are right! Just getting back into fishing (since 2017) and was posting for a recommendation. Someone recommended a voodoo, so I ordered one. Hope to order all the building supplies soon and components, and see if rod building is like riding a bicycle.. The first rod I built was great, but mhx discontinued the steelhead blank. Will it work fine if I just hack saw off 6" of the butt to make a 9' blank? Re: VooDoo Signature Sac-A -Lait Blank
Posted by:
Jeffrey Bersuch
(---)
Date: May 24, 2024 07:56PM
Could you tell me what tube size tip this blank uses? Was going to order components. Re: VooDoo Signature Sac-A -Lait Blank
Posted by:
Norman Miller
(Moderator)
Date: May 24, 2024 09:36PM
Tip is listed as a 5.5, and if I remember correctly it was right on.
Norm Re: VooDoo Signature Sac-A -Lait Blank
Posted by:
Jeffrey Bersuch
(---.biz6.spectrum.com)
Date: May 25, 2024 01:00AM
Thanks. I was going to order a 4.5. Glad I read, or the fact they were out of dryers... Re: VooDoo Signature Sac-A -Lait Blank
Posted by:
Jeffrey Bersuch
(---)
Date: May 28, 2024 09:33PM
Received my blank today. It does look like it's going to be a good rod. As soon as mudhole gets some dryers and thread furnishing tools in, I can start building it. Sorry, only registered users may post in this forum.
|