I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Current Page: 1 of 1897
Subject Views Posts  Started By  Last Post 
Sticky: Solicitations 34,567  Tom Kirkman  08/31/2011 09:37AM 
Last Post by Tom Kirkman
Sticky: MUST READ - How To Register and Log-in 144,591  Tom Kirkman  01/16/2009 05:22PM 
Last Post by Tom Kirkman
Sticky: Complete Rules - Forum, Photos, Buy/Sell Pages 46,216  Tom Kirkman  01/16/2009 05:21PM 
Last Post by Tom Kirkman
Which Epoxy for gluing carbon sticks (rod repair) 349  12  Tolo Mentes  06/06/2024 06:11AM 
Last Post by Michael Danek
The best 1 piece 14 foot fiberglass hallow rod blank 55  Cindy Middleton  06/06/2024 12:46AM 
Last Post by Spencer Phipps
Blank sanding 306  10  David Sytsma  06/05/2024 11:36PM 
Last Post by Spencer Phipps
NFC Euro blanks 89  Herb Knowlton  06/05/2024 10:35PM 
Last Post by David Olsen
Blank rec for my wife ? 203  Jeremy Moore  06/05/2024 09:23PM 
Last Post by Russell Brunt
Lamiglas 213  Chris Rosell  06/05/2024 08:09PM 
Last Post by Chris Rosell
Loving the new rods I've built recently 268  12  David Baylor  06/05/2024 04:26PM 
Last Post by David Baylor
OEM Guides? 97  David Olsen  06/05/2024 01:56PM 
Last Post by David Olsen
NFC SJ703 vs Rod Geeks Carbon 5 304  16  David Riesenbeck  06/05/2024 06:39AM 
Last Post by Dean Veltman
NFC XO Skeleton grip (pairing) 173  Ben Lori  06/04/2024 04:22PM 
Last Post by David Baylor
Jetty rod casting blank 301  Alfredo Sepulveda  06/04/2024 04:04PM 
Last Post by Trevor Esparza
Gen4 and Rod Bond shelf life 152  Ben Lori  06/04/2024 01:35PM 
Last Post by david taylor
Vintage thread finish 247  jonathan utz  06/04/2024 03:51AM 
Last Post by Joe Ledbetter
Fuji DPS long nut question 130  Gianmaria Vigo  06/04/2024 03:33AM 
Last Post by Gianmaria Vigo
Reel seat and fighting butt questions. 450  12  Ernie Blum  06/04/2024 02:59AM 
Last Post by Joe Ledbetter
Grip Reaming/Fitting Advice 443  14  Robert Horner  06/03/2024 10:47PM 
Last Post by Les Cline
Rookie question regarding NFC blanks and I’m ordering my rod building equipment tonight. Please advise ASAP before I order. 331  11  Jeremy Moore  06/03/2024 08:57PM 
Last Post by Chris Rosell
Hitena 386  Lynn Behler  06/03/2024 08:41PM 
Last Post by Tom Kirkman
NFC MB765-1 “stinger” vs “challenger@ 266  David Riesenbeck  06/03/2024 03:49PM 
Last Post by David Riesenbeck
Newb Need advice on 1st blank for son. In a pickle 371  10  Jeremy Moore  06/03/2024 01:54PM 
Last Post by Jeremy Moore
Recoil Spinning Guide Train 325  eric popejoy  06/03/2024 01:30PM 
Last Post by Spencer Phipps
Most Sensitive Rod Blank    Pages: 1 2 985  29  Isaiah Bock  06/03/2024 12:44PM 
Last Post by Isaiah Bock
CCS Data Log    Pages: 1 ... 8 9 10 18,326  197  El Bolinger  06/01/2024 10:44PM 
Last Post by Kevin Fiant
Has anyone .....    Pages: 1 2 1,739  22  David Baylor  06/01/2024 07:35PM 
Last Post by David Baylor
Blank recommendations 447  13  Peyton Raburn  06/01/2024 07:13PM 
Last Post by David Baylor
9ft Crappie Jigging Blank 437  13  Jeffrey Bersuch  06/01/2024 12:32AM 
Last Post by Jeffrey Bersuch
Point Blank PB701LXF - crappie? 304  Rick Handrick  05/31/2024 04:01PM 
Last Post by Jay Dubay
noisy guide(s) 398  15  Josh Freeseman  05/31/2024 03:40PM 
Last Post by David Baylor
Kr concept and wind knots 437  14  jonathan utz  05/31/2024 07:26AM 
Last Post by roger wilson
Lamiglas 381  Herb Knowlton  05/31/2024 01:10AM 
Last Post by Spencer Phipps
Anyone ever do a lake trout vertical jig build? 347  David Riesenbeck  05/29/2024 07:46PM 
Last Post by David Riesenbeck
Guide Sizes for low profile reel on cast rod 452  Brian Preston  05/29/2024 10:27AM 
Last Post by roger wilson
10’ Surf Rod Blank 307  Will Bedell  05/28/2024 10:18PM 
Last Post by Will Bedell
VooDoo Signature Sac-A -Lait Blank 628  Steven Paris  05/28/2024 09:33PM 
Last Post by Jeffrey Bersuch
Next Level Rod Finish 1,451  14  Dennis Danku  05/28/2024 07:10PM 
Last Post by David Baylor
NFC Carbontex grips 486  Rick Boley  05/28/2024 02:27PM 
Last Post by John Santos
Metalic thread fade in in sun. 390  Glenn McMurrian  05/27/2024 03:24PM 
Last Post by Glenn McMurrian
Fly reel on a casting seat 300  Jeffrey Bersuch  05/27/2024 03:04PM 
Last Post by Tom Kirkman
Adding a clutch between a wrapper motor and its drive pulley 314  roger wilson  05/26/2024 01:51PM 
Last Post by roger wilson
Carbon-tech reel seat 307  Rick Boley  05/26/2024 01:07PM 
Last Post by Spencer Phipps
Help with guide selection for spiral wrap casting rod please 226  Ed Rose  05/26/2024 10:28AM 
Last Post by Les Cline
Color and Thread Suggestion 280  Tolo Mentes  05/26/2024 10:07AM 
Last Post by Mark Hahn
Spiral wrap a 2 piece rod? 424  Ed Rose  05/26/2024 09:19AM 
Last Post by Michael Danek
Help in building a feeder fishing rod 661  Tolo Mentes  05/26/2024 07:16AM 
Last Post by Tolo Mentes
Metalic thread fade 274  Glenn McMurrian  05/25/2024 10:37PM 
Last Post by Glenn McMurrian
Best Way To Cover Signature Area    Pages: 1 2 864  22  Bruce Tomaselli  05/25/2024 07:43PM 
Last Post by Lynn Behler
Rod ferrules 566  13  Ryan Edamatsu  05/25/2024 10:01AM 
Last Post by Robert A. Guist
NFC SJ 703-1 (X-ray LMX C6O2) Sizing 304  Owen Mezger  05/24/2024 11:07PM 
Last Post by Owen Mezger
Salmon vs inshore blank 327  David Riesenbeck  05/24/2024 05:13PM 
Last Post by Russell Brunt
Follow up on two rods 354  Ed Rose  05/24/2024 04:30PM 
Last Post by Michael Danek
Current Page: 1 of 1897
Options:
Webmaster