I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2025 ICRBE
Custom Rod Symbol
Common Cents System
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Century Rods
Custom Fly Grips LLC
Decal Connection
EPSON Decal Printers
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Fuji DPS long nut question
Posted by: Gianmaria Vigo (---.ip99.fastwebnet.it)
Date: June 04, 2024 03:33AM

Hello there,
I'm building a light saltwater spinning rod (mainly popping, 40 lb line) to be coupled with a 4000/5000 size Shimano reel.

To achieve a better reel "tightening" there are basically two options:

1. standard reel seat nut + assist nut metal ring
2. long-nut reel seat

I'm wondering which one is better for the purpose...

Options: ReplyQuote
Re: Fuji DPS long nut question
Posted by: Ted Morgan (211.30.14.---)
Date: June 17, 2024 06:07PM

The long nut has more threads. IMHO, it offers better, stronger engagement and less chance of deforming the nut from over tightening. Adding a secondary locking nut is a bit overkill with it, but it will completely prevent accidental loosening. You will need the extension sleeve if you need to wind the locking nut or main nut off the threads.

I use the long nut and DPSM in size 20 for those sizes you mention.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster