nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

2019 EXPO
CCS Database
Int. Custom Rod Symbol
Common Cents Info
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BRC Rods
Bingham Enterprises
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
Renzetti Inc.
Rod Components USA
Rougarou Rods
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
The Rod Room
Trondak U-40
Utmost Enterprises

Subject Views Posts  Started By  Last Post 
thin finish on guides 994  10  matt lewis  12/05/2001 10:45AM 
Last Post by matt lewis
Reel Seat Bushing question- Cut or not to cut? 1,490  Tony Hill  12/11/2001 03:47AM 
Last Post by Tony Hill
Oversize Tips 849  Harry Colborn  12/07/2001 09:38AM 
Last Post by Scott Greenberg
Warren doing ok 792  Warren  12/04/2001 03:17PM 
Last Post by Rich Garbowski
Reminder on the name thing 785  Tom Kirkman  12/04/2001 08:24PM 
Last Post by Mike Ballard
offset spacing 908  joseph ciampa  12/06/2001 09:04AM 
Last Post by joseph ciampa
inexpensive anodized seats 910  jnail  12/04/2001 03:57PM 
Last Post by John Bumstead
multi-piece fly rod blanks 877  Clark Whitcomb  12/04/2001 05:10PM 
Last Post by Bob McKamey
speaking of bubbles 773  Angelo Randaci  12/05/2001 01:27AM 
Last Post by Hugh Miller
Need feather help 964  Gerald McCasland  12/04/2001 09:49AM 
Last Post by Tom Kirkman
Wrapping Jigs/Rod Lathes 2,345  Chris  12/05/2001 10:28AM 
Last Post by John Burford
Recoil snake guides 1,035  Tore Nilsen  12/04/2001 09:38AM 
Last Post by Tom Kirkman
Guides, what's best? 884  Tore Nilsen  12/04/2001 07:30PM 
Last Post by Tore Nilsen
~~~Pacific Bay~~~ 1,039  Richard's Rod & Reel Service  12/03/2001 07:46PM 
Last Post by Richard's Rod & Reel Service
silk wrap issues 857  Sean Tate  12/03/2001 06:51PM 
Last Post by jnail
bubbles? 1,048  steve walters  12/03/2001 05:56PM 
Last Post by Dick Zrudsky
Crappie/Panfish Rod 965  Bill Gaynor  12/03/2001 05:51PM 
Last Post by Bob McKamey
Problems with thread 898  Stephen Ashcraft  12/04/2001 09:13AM 
Last Post by Elrod
Cane Rodmaking Lessons 1,040  Sean Tate  12/03/2001 11:30PM 
Last Post by Jojo D
need 2 wt. travel blank 1,078  Mike C.  12/05/2001 05:57PM 
Last Post by Woodman
20% off Rainshadow in Stock Sale 912  Karen Hapka  12/03/2001 04:48PM 
Last Post by Tom Kirkman
Disastrous Blotches--What Next? 1,240  Andrew White  12/03/2001 10:44PM 
Last Post by Mike Bolt
Fenwick HMG Steelhead Blanks 1,658  Dan  12/04/2001 12:34PM 
Last Post by Bob Batson
Ink for technical drafting pens? 1,123  Matt Davis  12/03/2001 09:47AM 
Last Post by Bob Petti
LS 2000/2000 Supreme 889  Matt Davis  12/03/2001 09:27AM 
Last Post by Tom Kirkman
Light surf rod 1,027  Hugh Miller  12/03/2001 09:29AM 
Last Post by Tom Kirkman
Alconite guides 791  Jim Levy  12/03/2001 10:55AM 
Last Post by Tom Kirkman
looking for drags 832  chris-flying fish  12/04/2001 12:15AM 
Last Post by Chef Jim
5 and 7-4 pc with one handle 775  Lnewby  12/05/2001 06:16PM 
Last Post by Woodman
I couldn't believe my eyes!! 1,272  Paul O  12/05/2001 02:56AM 
Last Post by Mark Schulte
Sanding The Finish? 857  Paul O  12/03/2001 10:46PM 
Last Post by Mike Bolt
Amtak dealer 1,490  Wes  12/03/2001 12:15AM 
Last Post by Tom McNamara
On the subject of spam 1,074  Tom Kirkman  12/02/2001 03:53PM 
Last Post by Tom Kirkman
Foul-proof Guides 2,453  Jojo D  12/02/2001 11:37AM 
Last Post by Jojo D
Beginner rod builder advice 1,267  Fred Murphy  03/01/2006 09:41AM 
Last Post by GARY.BARNES
Fighting Butts for flyrods 951  Ben Saunders  12/02/2001 09:06AM 
Last Post by Lincoln Parmer
Surf Stix & Spirals 905  Billy 40  12/02/2001 12:58AM 
Last Post by Jim Upton
Rainshadow Blanks 869  David  12/01/2001 11:03PM 
Last Post by Rich Garbowski
This Board generates SPAM 1,083  18  John  12/04/2001 03:32PM 
Last Post by Dorge
This Board generates SPAM 1,083  John  12/02/2001 02:49AM 
Last Post by Roert Balcombe (REELMAN)
spiral wrap 1,092  Marcel Charest  12/01/2001 07:22PM 
Last Post by john bratton
Lamiglas Ti/IM700 blank 1,619  Dave Joseph  12/01/2001 03:23PM 
Last Post by Dave Joseph
Snake eyes 954  Dick Zrudsky  12/02/2001 09:54AM 
Last Post by Tom Kirkman
Initial questions 1,145  Pat Higgins  12/01/2001 02:41PM 
Last Post by Ellis Mendiola
Tennessee Handle ? 935  Rick Y.  12/05/2001 08:52PM 
Last Post by Bob Vasko
Cork , Restoring it !? 813  Solana  12/02/2001 05:13AM 
Last Post by Solana
cork rings 888  SAmmy Mickel  12/01/2001 09:02AM 
Last Post by Tom Kirkman
Forecast blanks 755  Gene Dunkin  11/30/2001 11:11PM 
Last Post by Gene Dunkin
Weaving 877  Ellis Mendiola  12/01/2001 04:09PM 
Last Post by Dick Zrudsky
Holland Thread 838  Ray Cable  02/10/2006 07:30PM 
Last Post by Paul Hingle