SPONSORS
2024 ICRBE EXPO |
transparency
Posted by:
Bill Cohen
(---.sunriver.cmc.net)
Date: June 02, 2005 12:41PM
I like to use a lot of light colors when wrapping guides. Most of the time I use A thread always use CP . When I the Flex Coat is dry I can see the the outline of the guide foot under the Flex Coat. There also different shades of the color thread that I have used.Any suggestions? Re: transparency
Posted by:
Gerry Rhoades
(---.unifield.com)
Date: June 02, 2005 01:20PM
Which CP are you using? When I use CP, I use Gudebrod 811 and haven't noticed that. I tried the Flex Coat CP years ago and wasn't impressed. You may also want to pick up a bottle of Gudebord One Part Finish, #840 and try it. I tried it on some wraps recently and it acted just like CP and finish combined, which wasn't what I wanted at the time, but will be useful in some applications. Re: transparency
Posted by:
John Dow
(---.213.252.64.snet.net)
Date: June 04, 2005 04:15PM
Bill , double check your thread packing and tension , that may be the problem . Have fun , JHD Got Fish ? Sorry, only registered users may post in this forum.
|