nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

2019 EXPO
CCS Database
Int. Custom Rod Symbol
Common Cents Info
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BRC Rods
Bingham Enterprises
Canada Rodbuildersupply
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
Renzetti Inc.
Rod Components USA
Rougarou Rods
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
The Rod Room
Trondak U-40
Utmost Enterprises

Subject Views Posts  Started By  Last Post 
Rod for wire line fishing 1,107  John (Jack) Sexton  11/06/2001 12:37AM 
Last Post by John (Jack) Sexton
Factory Legend Ultra components 763  roncaddis  11/04/2001 02:38PM 
Last Post by Larry Richards
The Ultimate moderate 3 wt blank 1,097  11  Jeff Connelly  11/07/2001 09:58AM 
Last Post by shaun
7'6" 3 or 4 piece blank for 40# line 957  Neil Buchler  11/14/2001 08:13AM 
Last Post by George McRobbie
fly rod spining 1,281  Joseph Jacobs  11/03/2001 12:36PM 
Last Post by Mark
distance to butt guide? 1,066  jeff  11/05/2001 11:27PM 
Last Post by joe
Wood lathe recommendation 1,687  10  Barry  11/05/2001 06:10PM 
Last Post by Barry
Spiral Wrap: other considerations 1,657  10  Rich Garbowski  11/04/2001 04:35PM 
Last Post by William
Trolling Rod for Gulf Grouper??? 2,442  BobH  11/06/2001 12:42AM 
Last Post by Kerry
Fall Treats for Rod Builders Newsletter 1,272  Tom McNamara  11/02/2001 10:05AM 
Last Post by Tom McNamara
Which Blank? 1,484  Jimmy  11/02/2001 10:53AM 
Last Post by Petro Chem
MA classes 1,316  ipoppa33  11/04/2001 01:45PM 
Last Post by andrew
beginner help 1,193  Dave P  11/02/2001 09:03AM 
Last Post by john bratton
Rattan Grips? 1,142  Boo  11/09/2001 08:16AM 
Last Post by Lincoln Parmer
Concept Guides or not? 1,044  Rick Y.  11/01/2001 06:10PM 
Last Post by William
Need blank 1,065  Tom Kirkman  11/01/2001 04:04PM 
Last Post by Tom Kirkman
Purchasing Shikari blanks? 1,381  William  11/02/2001 08:05PM 
Last Post by Warren
Getting Started...... 1,073  Queball  11/01/2001 06:18PM 
Last Post by Rich Garbowski
RUBBERIZED CORK 946  Karen Hapka  11/01/2001 11:57AM 
Last Post by Karen Hapka
UNIFIED WHEELS 1,090  Karen Hapka  10/31/2001 09:52PM 
Last Post by Kevin
Spinning rod test casting 1,200  Steve  10/31/2001 07:37PM 
Last Post by Pete
Whoops, need help mounting in lathe 1,057  Elrod  10/31/2001 09:03AM 
Last Post by Tom Kirkman
Which Alps Printer 1,092  Dave's Rods  10/31/2001 10:20PM 
Last Post by Harv
Help with a Blank 983  Jason Weber  10/31/2001 10:29AM 
Last Post by dan
single foot guides 977  brad f.  11/14/2001 10:54PM 
Last Post by Sanford Hochman
Unified wheel? 1,120  Bob Scacheri  11/06/2001 12:52AM 
Last Post by Phil D'Avanzo
Nodeless Rod Construction? 2,340  StickyLine  11/02/2001 09:16AM 
Last Post by Winston Binney
Coloring a graphite blank 1,238  John Lasky  11/08/2001 09:34PM 
Last Post by Steve Saitman
Graphite USA blank 1,835  Jim Reinhardt  11/02/2001 07:03PM 
Last Post by Mark
Looking for blank 1,178  Ulua_Buster  10/31/2001 10:01AM 
Last Post by Petro Chem
CORK FILLER 1,128  STEVE MCCURRY  12/11/2001 12:37PM 
Last Post by Jerry D.
Gudebrod HT Metallic Thread - Pearl 1,308  Bob Petti  11/02/2001 09:51AM 
Last Post by Buzz B
cane fly rod kits 1,118  Larry Richards  10/30/2001 01:42AM 
Last Post by Dave's Rods
what material do i need 1,161  matt  10/29/2001 10:30PM 
Last Post by matt
Spigot ferrule repair question 1,368  Alex Schlager  10/29/2001 04:12PM 
Last Post by Tom Kirkman
Silk 1,103  Gadwall8  11/11/2001 08:53AM 
Last Post by Lincoln Parmer
help removing reel seats 1,127  matt  10/29/2001 02:54PM 
Last Post by matt
Site problems 962  Tom Kirkman  11/20/2010 10:39AM 
what blank is castaway sb2-3-4's? 895  matt  06/03/2004 03:16PM 
Last Post by Mike Tanner
Manufacture tags (Guides) 945  Mark Schulte  10/28/2001 05:53PM 
Last Post by Russell
guide spacing 1,227  14  capt.gary  11/02/2001 10:30PM 
Last Post by Jojo
How many guides? 1,203  13  Mike B.  10/30/2001 05:12PM 
Last Post by Rich Garbowski
Epoxy Application in Cold Temps 1,222  Dan Bryant  12/02/2001 01:51AM 
Last Post by tunawolf
Latest Mag. Issue 1,171  Brian Rosenbery  10/27/2001 11:58AM 
Last Post by Mike B.
waves in finish 923  dan  11/12/2001 04:03PM 
Last Post by Dave
turning reel seats 1,037  Rick Lewis  10/26/2001 03:03PM 
Last Post by Tom Kirkman
REC guides? 1,102  Angelo Randaci  10/26/2001 07:26PM 
Last Post by Gadwall8
Loomis CBR blank 1,302  matt  10/26/2001 05:51PM 
Last Post by Bob McKamey
Rod repair -thread matching??? 2,120  Mark Schulte  11/08/2001 09:47PM 
Last Post by Steve's Custom Rods
Solid Carbon Graphite Blanks? 1,069  Trickster  10/27/2001 08:44PM 
Last Post by chris-flying fish