I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2019 EXPO
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rougarou Rods
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Subject Views Posts  Started By  Last Post 
very small ID grips 846  jnail  12/21/2001 06:06AM 
Last Post by Ed
ultralight blanks 963  dan  12/19/2001 08:02PM 
Last Post by jim reed
30% OFF WIEBE HANDLE KITS 929  Karen Hapka  12/19/2001 10:56AM 
Last Post by Karen Hapka
GL3 LOOMIS Spinning BLANK. 1,329  Solana  12/20/2001 11:53AM 
Last Post by Elrod (Jon Jenkins)
AmTac blanks 735  Coach  12/19/2001 09:50PM 
Last Post by dave (flyrod)
AmTak blanks 1,000  Coach  01/21/2002 04:18PM 
Last Post by Steve Drown
Clemens power wrap 816  Coach  12/18/2001 11:33PM 
Last Post by Coach
Cane spine...? 741  Sean Tate  12/22/2001 09:46PM 
Last Post by William
can permagloss be sprayed 747  John Lasky  12/21/2001 01:15AM 
Last Post by Doug Hall
Sourcing Cork TN Handle 564  Al B  12/18/2001 05:04PM 
Last Post by Elrod (Jon Jenkins)
40% OFF - Rainshadow Blank Sale 692  Custom Tackle Supply  12/19/2001 04:52PM 
Last Post by Sean Dassau
Advice on buying a new/used small metal lathe 1,201  Stephen Ashcraft  12/19/2001 03:19PM 
Last Post by Tom Kirkman
Surf blank for light (3/4 to 1.5 oz plugs) 1,259  Paul Metzger  12/18/2001 12:46PM 
Last Post by Bob Batson
Orvis Doublewraps 714  Larry Puckett--FlyDoctor  12/18/2001 02:29PM 
Last Post by Tom Kirkman
Fly in the handle 847  Capt. Harold  12/18/2001 07:22PM 
Last Post by William
Petrochemical- End of Season Sale 734  Petro Chem  12/19/2001 12:14AM 
Last Post by Jim
Epoxy in the reel seat threads 645  Mike Carpenter  12/18/2001 11:41PM 
Last Post by Capt Neil Faulkner
Spinning & retrieval"line slap" 1,126  Warren  12/19/2001 12:14PM 
Last Post by Mike Kosiba
Gel coat as a rod finish 1,877  10  charlie russell  12/18/2001 11:01PM 
Last Post by steve
Thorne Brothers Ice Rods 780  Paul O  12/19/2001 05:34PM 
Last Post by jnail
Sponsors, when GLoomis listing coming out. 735  Elrod (Jon Jenkins)  12/18/2001 06:27AM 
Last Post by Custom Tackle Supply
Looking for reasonably priced 2 or 3wt 3 or 4pc blanks 859  Andrew  12/18/2001 02:13PM 
Last Post by bill mathis
Bright or metalic wraps on fly rods? 1,241  John Lasky  12/18/2001 04:53PM 
Last Post by jnail
Stripprer placement 1,095  Jim Reinhardt  12/18/2001 04:57PM 
Last Post by jnail
How to make vertical spine finder? 909  Elrod (Jon Jenkins)  12/17/2001 11:00PM 
Last Post by Bruce Young
Fly in the handle 1,359  Capt. Harold  12/18/2001 01:45AM 
Last Post by Wayne Hofer
turning aluminum or brass 845  Stephen Ashcraft  12/16/2001 11:22PM 
Last Post by Rick Funcik
lamiglas equivalents please 1,042  chris-flying fish  12/17/2001 07:34PM 
Last Post by Todd Vivian
Lake Trout Trolling Blank ?? 2,690  Tom Wolfe  12/17/2001 11:58PM 
Last Post by Petro Chem
Epoxy mix and match 1,100  David A Tomasch  12/22/2001 02:41PM 
Last Post by Sanford Hochman
Loomis 9' 3 piece spacing. 884  Ed Kelly  12/18/2001 11:04PM 
Last Post by steve
Help finding graphite trigger 754  Don Baker  12/16/2001 03:03PM 
Last Post by Davesrods
Jeff Vadakin Weaving jig 1,301  Steve  12/16/2001 12:21AM 
Last Post by Steve
Darkening cane 1,230  John  12/17/2001 10:28AM 
Last Post by John
mandrels 626  Larry  12/17/2001 09:04AM 
Last Post by bill mathis
mandrels 931  Larry  12/15/2001 11:09PM 
Last Post by Larry
foam spacers 1,049  Larry  12/16/2001 12:45AM 
Last Post by Ed Sinn (mrsinbad)
Finish??? 1,038  N.SpannTx  12/15/2001 09:28PM 
Last Post by William
Cleaning brushes 1,064  Scott M.  12/15/2001 06:07PM 
Last Post by Richard's Rod & Reel Service
Spine finder 864  Dave P  12/15/2001 01:59PM 
Last Post by Tom Kirkman
4 strippers? 1,462  Elrod (Jon Jenkins)  12/18/2001 02:34PM 
Last Post by Tom Kirkman
Equal angle guide placement 1,725  12  Elrod (Jon Jenkins)  12/17/2001 07:33PM 
Last Post by Wes
aesthetics vs performance 835  Jimmy Nick  12/15/2001 10:58AM 
Last Post by Tom Kirkman
The Stiffest Blank !!! 999  Solana  12/17/2001 11:00PM 
Last Post by Solana
LOOMIS IMX BLANK COMPARES TO? 963  David A Tomasch  12/15/2001 10:20AM 
Last Post by Lincoln Parmer
Opinions on reel seat 853  Peter Malessa  12/15/2001 01:25PM 
Last Post by Capt. Bill Hobbs
Getting 'clear'.... 956  Buddy Sanders  12/16/2001 01:49AM 
Last Post by Buddy Sanders
Light NCP thread and blotches 941  Billy 40  12/18/2001 12:56AM 
Last Post by Chef Jim
Lighting in the Shop 736  Dwayne Rye  12/16/2001 10:27PM 
Last Post by Dwayne Rye
Epoxy Coat Co. need address 955  Brian Thompson  12/15/2001 11:43AM 
Last Post by Karen Hapka
Options:
Webmaster