SPONSORS
2024 ICRBE EXPO |
Decorative wrap terminology - HELP!
Posted by:
Colten powers
(---.sd.sd.cox.net)
Date: April 18, 2024 04:33AM
Hey everybody so I’m still new to rod building have built about 7 rods so far. My question is that I want to try my hand at some more difficult wraps other than just chevrons etc. I have Billy’s book and want to get going but I’m hung up on understanding the terminology and how to follow the wrapping instructions. Can you guys point me in the right direction? Preferably a video describing the terminology, such as box in / cross out / +1 etc.. thanks for all your help! Re: Decorative wrap terminology - HELP!
Posted by:
Tom Kirkman
(Moderator)
Date: April 18, 2024 08:30AM
The rod building glossary in the tab section on this page includes most of the terms and their explanations. Also, RodMaker did an article (Jim Upton) on cross wrap terminology some years ago.
............. Re: Decorative wrap terminology - HELP!
Posted by:
Robert A. Guist
(---.res6.spectrum.com)
Date: April 18, 2024 09:45AM
Hello Colten & Tom.
Volume/Issue.......................Article.........................................................................................Author...................Page. 17/6 Weave: Thread Art Glossary of Words and Terms.(Same As V-7, I-4, Pg.-17 Dec Wraps) By Jim Upton. 26 Tight Wraps & Tighter Lines. Sorry, only registered users may post in this forum.
|