nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

2019 EXPO
CCS Database
Int. Custom Rod Symbol
Common Cents Info
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BRC Rods
Bingham Enterprises
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
Renzetti Inc.
Rod Components USA
Rougarou Rods
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
The Rod Room
Trondak U-40
Utmost Enterprises

Subject Views Posts  Started By  Last Post 
epoxy flamability 1,095  allen  10/23/2001 09:19AM 
Last Post by Dwayne Rye
SW Sportsman article 1,123  Pete  10/22/2001 09:01PM 
Last Post by Pete
Wrapping thread and mono 1,139  Warren  10/24/2001 04:38PM 
Last Post by jnail
HOOKS FOR KEEPS 1,227  Jim Gaskins  10/24/2001 08:24PM 
Last Post by chris-flying fish
Motor connection 1,207  Steve  10/22/2001 07:49PM 
Last Post by jim b
Component Selection? 1,303  Mark Vanderhoof  10/22/2001 02:53PM 
Last Post by Tom Kirkman
Butt Wrap Layout PC Software 3,681  16  Kenneth Kostiha  10/24/2001 11:36PM 
Last Post by trouty
NYLON Sizes A, 00, c, d, e ... Which is which ? 1,519  Alberto  10/22/2001 02:18PM 
Last Post by Alberto
Spinning rod from casting blank 1,481  Mark Schulte  10/22/2001 07:08PM 
Last Post by Ellis Mendiola
Contacting St. Croix? 1,160  jim b  10/22/2001 07:57PM 
Last Post by jim b
Guides and more guides 2,424  Dwayne Rye  10/22/2001 01:44PM 
Last Post by Dwayne Rye
Encapsulated Foregrips 1,227  Dwayne Rye  10/28/2001 07:24AM 
Last Post by jack
Installing cork tape 1,328  Mike Thompson  10/22/2001 08:55AM 
Last Post by Greg
Removing a Guide's Finish 1,077  Bill Doherty  10/20/2001 10:20PM 
Last Post by Bill Doherty
***Our New Catalogue*** 1,359  Rich Garbowski  10/20/2001 12:11PM 
Last Post by Rich Garbowski
Washington State rod builders 1,943  Bob Balcombe (REELMAN)  10/20/2001 04:35AM 
Last Post by Bob Balcombe (REELMAN)
Washington State rod builders 1,255  Bob Balcombe (REELMAN)  10/20/2001 04:18AM 
Last Post by Bob Balcombe (REELMAN)
single thread trim wrap 1,221  Marcel Charest  10/20/2001 05:05PM 
Last Post by Pat Barnard
Need Input , innnnnputtttttt 1,488  14  Warren  10/23/2001 11:28PM 
Last Post by allen
Black thread 1,834  Steve  10/21/2001 12:12PM 
Last Post by jnail
hook inlay 1,045  jnail  10/21/2001 10:04AM 
Last Post by Rich Garbowski
A suggestion & comment 1,143  Warren  10/19/2001 02:27PM 
Last Post by John Britt
Guide Spacing 1,108  Brian McGrath  10/19/2001 09:23AM 
Last Post by Tom Kirkman
"Generic" Loomis blanks? Seconds? Blems? 1,377  Tony Hill  10/19/2001 11:40PM 
Last Post by Tony Hill
Thread art?!? 1,650  Warren  10/19/2001 09:32PM 
Last Post by Rich Garbowski
Feather Source 2,151  12  Bob Meiser  10/29/2001 05:47PM 
Last Post by Bob Meiser
Guide spacing chart wanted. 2,926  Gunnar Joergensen  10/19/2001 09:31AM 
Last Post by Tom Kirkman
Wheels for supports 1,252  Larry  10/18/2001 07:56PM 
Last Post by Petro Chem
heavy duty roller guides 1,226  dksan  10/18/2001 07:02PM 
Last Post by Petro Chem
reel seat uplock or downlock 1,064  John Lasky  10/24/2001 01:13AM 
Last Post by Alberto
East Branch Rods 1,313  TomH  10/18/2001 11:16AM 
Last Post by John Lasky
dryer type choice 1,093  Rick W.  10/18/2001 11:38AM 
Last Post by John Lasky
Reel Seat 1,383  Larry Bennett  10/18/2001 08:11PM 
Last Post by Chuck McIntyre
G>Loomis warrenty 1,234  Mike Peppe  10/22/2001 12:23PM 
Last Post by david cooksey
30 tonnage graphite? 11,393  13  Angelo Randaci  06/18/2013 03:50PM 
Last Post by Michael McLeister
Lost email addresses 1,128  Capt Neil Faulkner  10/25/2001 09:02PM 
Last Post by capt.gary
Bent butt section 1,398  12  Russell  10/17/2001 10:31PM 
Last Post by Mike Bolt
Less than accurate description 1,335  Warren  10/16/2001 05:47PM 
Last Post by Warren
guides for long distance casting rod 3,317  Dave F.  10/17/2001 09:48AM 
Last Post by Tom Kirkman
Certified Professional Rod Builder 2,568  marcus  10/17/2001 10:33PM 
Last Post by Mike Bolt
Glue to relaminate a bamboo blank 1,288  John Lasky  10/19/2001 02:31AM 
Last Post by Davesrods
rod blanks 1,280  David Teague  10/16/2001 11:51AM 
Last Post by John Britt
Rod Drying Chucks 1,850  Scott Kolts  10/17/2001 09:19AM 
Last Post by Larry
Why are 6-7' H-XH Spinning rods so hard to get vs. Conventional? 1,442  Tony Hill  10/16/2001 10:17AM 
Last Post by Rich Garbowski
Lamiglas 2002 Prototype Blank 1,298  Warren  10/15/2001 09:34PM 
Last Post by Warren
COLOUR for light brown RODS 1,146  Alberto  10/15/2001 10:07PM 
Last Post by Alberto
Fuji Blanks ??? 1,281  Christian (from Brazil)  10/15/2001 08:35PM 
Last Post by William
Permagloss Proper usage? 1,487  John Lasky  10/15/2001 05:06PM 
Last Post by John Britt
Winding Checks? 1,375  Mark Vanderhoof  10/15/2001 08:46PM 
Last Post by Jim
L2000 vs vaithane 900 and more 1,228  John Lasky  10/15/2001 10:54AM 
Last Post by Tom Kirkman