SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 97
15 years ago
Harv Gorton
first page of text is page 35, Then pg 7, ok till 34, that's 5&6, I have no pg 3&4.
Everybodys' that way, or did I get a "Special Edition" collector's item ?
Bids open at $25K
:>}}
Forum: rodboard 15 years ago
Harv Gorton
I use them for Lake Erie trolling with in line planer boards. Very sweet for this. Parabolic...no. But lotsa backbone & a fast action. I got mine from Karen at Bingham.
Forum: rodboard 15 years ago
Harv Gorton
Do you have the particulars ( model #'s) on these blanks ? After a couple years rodbuilding hiatus, I have been recently asked about these & planer rods.
Forum: rodboard 16 years ago
Harv Gorton
Like Putter said, you'll have to "fool" it. Take the metallic sticker off the black cart. & put it on the white cart. Then tell the printer to "spot color" in black...works every time :.}
you also have to do that with the 2010.
Forum: rodboard 16 years ago
Harv Gorton
OK ..Thanks for clearing that up !!
Sorry !!
vacation needed...
Forum: rodboard 16 years ago
Harv Gorton
Billy, since you haven't answered teh last 3 emails I sent you, and, since I've known you since you didn't know what threadwork was, ..it's time somebody busted YOUR chops...
you could always learn how to drive... LOL !!! & maybe become a cabbie in the big apple to help you support your rodbuilding addiction.. LOL !!!!
Have a good time my friend, & feel sorry for those of us who
Forum: rodboard 16 years ago
Harv Gorton
Ralph,
I use Rod Bond for repairing the wood in my pindecks in our bowling center. Dang tuff stuff !
It takes the riggers of balls & pins pounding it, without chipping out. If the faster glue is as tough, it;ll be GREAT !
Forum: rodboard 16 years ago
Harv Gorton
Vapors are FLAMMABLE. Many a kitchen wall has been blown off the house cause somebody didn't turn off the pilot light in the range while putting down a new counter top.
Fumes harmful ???? Spend a couple hours with Billy __:>}
Forum: rodboard 16 years ago
Harv Gorton
It 's called "when they hand you a lemon...make lemonade" :>}
Forum: rodboard 16 years ago
Harv Gorton
I have a couple hunks of theold black/grey/white Customgrip II ( 2X2X18") . How much do you need & what dia. hole ?
Forum: rodboard 16 years ago
Harv Gorton
13. tip tops
Pulling tip tops is a "3 handed" job...put a screw eye in your wall somewhere(( open the eye with a plier))...hook the tip on that..then heat gently & pull gently. As SOON as it's "hot enough"..it'll release & is now a " 2 handed" task.Or , my Rednck way...drive a finishing nail in the wall & bend a hook in it...hang hat on it when not in use by tip tops.
Forum: rodboard 17 years ago
Harv Gorton
15. Re: Rayon Thread
Ive used it a few times..it IS weaker & I've had guides rip off from dragging the rods thru heavy brush..course..I just yanked the rod thru, but.I'd avoid it.
Forum: rodboard 17 years ago
Harv Gorton
16. GRIDS
art -craft supply store
"Trans Graph-X " different grid scales( black) on clear plastic....lay over photo/clipart & copy on a copier/scanner...
Forum: rodboard 17 years ago
Harv Gorton
& we know emails go where they aren't intended..by forwarding...can't trust anybody anymore...
Forum: rodboard 17 years ago
Harv Gorton
FWIW..
I've had this.happen.once..1982..I put a light coat over top & I still have the rod..all's well.
Forum: rodboard 17 years ago
Harv Gorton
I have received emails that don't have my addy on them anywhere visible( even in'properties').....how's that work ?
Forum: rodboard 17 years ago
Harv Gorton
well..I dunno..the bigwater series is yellow...heavy blanks.I have4 of them to try out on Ontario w/ dipseys & J=Plugs. you need tough stuff there in late summer. I've had Kings pop right thru 30# line -sounds like a 30-06 going off.
Forum: rodboard 17 years ago
Harv Gorton
just a heads -up....
PC stitch is popular, but, I found "Patternmaker" from hobbyware.com to be better.(?)
Obviously, you can make a grid pattern from any image or text,& tweak the colors to your liking.
If you get VERSION 4..it will print a list for Madeira polyneon
Forum: rodboard 17 years ago
Harv Gorton
I figured Permagloss was too hot for fusion, didn't even try it...
Forum: rodboard 17 years ago
Harv Gorton
I tried White...scratched right off..you would need a topcoat of some kind...
Forum: rodboard 18 years ago
Harv Gorton
I used to build 12' 2 pc rods for guys using lead core for muskies.We found the perfect rod was a
Fenwick SU1445F.. butt dia. was like 1.225 X a # 8 tip - rated 1-4 oz lure. I don't know what blanks made nowadays are equal to that,but Todd could probably help you...
Forum: rodboard 18 years ago
Harv Gorton
30. Re: 12' Jig Rod
interesting thread..I also have had a request for a 10 footer...
Forum: rodboard |