SPONSORS
2024 ICRBE EXPO |
JPG file for decal
Posted by:
Phil Richmond
(210.81.201.---)
Date: July 19, 2006 03:28AM
Hey guys. I need to take a color picture and change it to black and white so I can use it to get decals made. Problem is, I can convert it to b/w, but not without a bunch of garbage. Greyscale was no problem, but was told the greyscale wasn't good enough, needed to be black.
What's the best way to convert yellow/grey to solid black? Thanks, Phil Re: JPG file for decal
Posted by:
Robert Heaton
(---.bri.dsl.connect.net.au)
Date: July 19, 2006 07:10AM
Photocopy it or fax it in Re: JPG file for decal
Posted by:
Harv Gorton
(---.pm3-2.pit-ch.pa.localnet.com)
Date: July 19, 2006 10:01AM
camera should have a setting for b/w. Re: JPG file for decal
Posted by:
Anonymous User
(Moderator)
Date: July 19, 2006 11:25AM
B&W on a camera is greyscale. It sounds like they're asking for line art which would be solid black.
............ Re: JPG file for decal
Posted by:
Mick McComesky
(---.boeing.com)
Date: July 19, 2006 11:51AM
I've only been able to do it the old fashioned way, coloring them manually with photoshop. Sorry, only registered users may post in this forum.
|