SPONSORS
2024 ICRBE EXPO |
Results 2281 - 2307 of 2307
9 years ago
Lynn Behler
2281. Re: Microwave Guides
Thanks Rolly, appreciate the input! Lynn
Forum: rodboard 9 years ago
Lynn Behler
2283. Microwave Threadjackers
Hi guys, yesterday when I asked about using microwave guides I got 14 replies, only one of which dealt directly with the question as asked. Thank you Wes (a little more info would have been welcome however). Jim, Jim, and Dennis I shoud have a Fuji tattoo, I've been using them since Lew Childre was still around and if anyone asks I still say Fuji is #1. I feel that Lew and Doug Hannon were cut fr
Forum: rodboard 9 years ago
Lynn Behler
2284. Microwave Guides
So, let's say you're going to built the best casting spinning rod possible. 7ft., 8-14lb. mono, 1/4 to 5/8 oz. lure. Does it get Microwave guides or not? Thanks, Lynn
Forum: rodboard 9 years ago
Lynn Behler
If you post this on a west coast forum the man himself may provide the answer.
Forum: rodboard 9 years ago
Lynn Behler
2286. Re: Minima 4's concern?
I sent 3 of these guides back to Mudhole care of the rodbuilding dept.because I spoke to a guy in that dept. who assured me that Pacific Bay woud be notified of the situation. This after being shot down by a Gentleman who shall remain unamed who stated (via operator of course) "we are not aware of any problems with Minima guides" Well you're aware of it now, and you have some of the bad
Forum: rodboard 9 years ago
Lynn Behler
2287. Re: Minima 4's concern?
I just had this issue with Minima 3's. I sent a few to Mudhole for them to inspect. They were BF3XG size 5. I had them cut the line on the trial run for the rod. I came home and cut 5 of them off and replaced them. The first 4 guides from the reel out were also Minima 3's BT3XG double foot and they were fine. Thanks, Lynn
Forum: rodboard 10 years ago
Lynn Behler
2288. Re: fuji acs reel seat
Hi Shawn,Fuji acs size 16 weighs 27 grams. Lynn
Forum: rodboard 10 years ago
Lynn Behler
2290. Utmost cork closeout
O n Tues. morning I read a post about Utmost Enterprises cork closeout. I ordered 5 pieces of cork and a reelseat on Tues. afternoon, and it was in my mailbox at 10 this morning, less than 48h.r.s later. I was charged $2.68 for shipping. I live 2900 miles from Utmost. This unbelievable service for an order that totaled less than $20.00. We hobby builders can't write off inflated shipping charges,
Forum: rodboard 10 years ago
Lynn Behler
On Tues, morning Mick Batson posted about a cork closeout at Utmost Enterprises. I ordered a reel seat and 5 pieces of cork that afternoon. My order was in my mailbox at 10a.m. this morning, less than 48 hr.s later. My total for the order was $19.68 shipping included. My charge for shipping was $2.68. This is what I call service! I live 2900 miles from Utmost Ent. and my hat's off to them. I thin
Forum: rodboard 10 years ago
Lynn Behler
2293. Re: Mudhole shipping!!
Which is what should've been done in the first place! and by the way, (I left this one get by before), L.L. Bean ships free.
Forum: rodboard 10 years ago
Lynn Behler
2295. Micro Guides
Is there anything to be gained from using mirco guides other than the obvious weight saved?
Forum: rodboard 10 years ago
Lynn Behler
2296. Re: shipping
Thanks folks for all your responses. I thought this might be a lively topic.
Forum: rodboard 10 years ago
Lynn Behler
2297. Re: shipping
1st thing, did check before odering , did not order, am shopping elsewhere.Second, there are about three people in the whole building, also it does'nt cost $8.00 to send 4 grams of guides from them to me. By the way I dropped the book at the post office which is located 2oo yards from my best trout spot.
Forum: rodboard 10 years ago
Lynn Behler
2298. Re: Mike Barkley
Condolences to family and friends of Mike Barkley. Your in our prayers. Lynn
Forum: rodboard 10 years ago
Lynn Behler
2299. shipping
Last week I sent a 6 oz. book on a 2500 mile journey at a cost of $2.53, I can mail a letter of up to 1 oz.. anywhere in the country for $.47. So why does it cost $8.00 for someone to send me a set of guides that weigh less than a 1/4 oz. 1000 miles? I don't mind paying for items but this almost doubles my order cost! No need to reply. Have a nice holiday.
Forum: rodboard 10 years ago
Lynn Behler
2300. thread UV protection
Some threads seem to fade from the sun rather quickly. Are there any CP's or finishes that protect against this? Thanks to all who reply.
Forum: rodboard 10 years ago
Lynn Behler
2301. Re: Flocked Shrink Wrap
Ken, I have done this in the past using automotive heat shrink. I found that it holds much better if you do it with 2 layers of tubing one at a time. Lynn
Forum: rodboard 10 years ago
Lynn Behler
2302. guides for braid
What guides should be stayed away from for use with braid up to 30lb.?
Forum: rodboard 11 years ago
Lynn Behler
2303. Re: Coloring Perma Gloss
I have added Barlows worm glitter to Permagloss with sucess, however sucessive coats of Pemagloss without glitter will be needed to get a totally smooth finish. Lynn
Forum: rodboard 11 years ago
Lynn Behler
2304. permagloss tint
I WOULD LIKE TO TINT PERMAGLOSS TO A TRANSPARENT GREEN TO WIPE OVER A BLANK. HAS ANYONE DONE THIS? IF SO WHAT DID YOU USE AS A PIGMENT? i WISH TO BE ABLE TO SEE THE ACTUAL GRAPHITE MATERIAL THROUGH THE FINISH, SO AM NOT INTERESTED IN PAINTING. THANKS TO ALL WHO RESPOND, lYNN
Forum: rodboard 11 years ago
Lynn Behler
2305. gps
When I run the gps for 27x with a spool dia. of 41.5 and shaft height of 81mm, I get a choke point of 1120.5mm. This seems to me to be about the only measurement in this system that is etched in stone and holds true for all the guide styles listed on the calculator except the KL-H series which moves the choke point back toward the reel by 8 inches. I'm planning to use KL25,KL16,KT10 reduction g
Forum: rodboard |