I nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2025 ICRBE
Custom Rod Symbol
Common Cents System
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Century Rods
Custom Fly Grips LLC
Decal Connection
EPSON Decal Printers
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods
Goto: Forum List•New Topic•Search•Log In Or Register
Current Page: 1898 of 1903
Subject Views Posts  Started By  Last Post 
concept question 2,900  6  olt  07/31/2001 09:55AM 
Last Post by Brad Tharp
Unusual spacer woods 2,675  4  Jim Reinhardt  07/31/2001 09:34AM 
Last Post by Tom Kirkman
Transfer lettering 3,355  6  Steve  07/31/2001 05:57AM 
Last Post by Ed
Angler's Workshop blanks... 5,775  7  Jeff Connelly  07/31/2001 02:39AM 
Last Post by Bob
New concept,spiral wrap, Archives 3,045  5  Warren  07/31/2001 12:35AM 
Last Post by john bratton
LS 2000 Supreme Application 2,663  3  Dale Milliser  07/31/2001 12:16AM 
Last Post by George Thurston
Thread Matte Finish 3,018  8  Bill Snow  07/30/2001 10:29PM 
Last Post by Joe
sealing cork 2,904  4  John carlton  07/30/2001 10:15PM 
Last Post by Joe
U40 LS Supreme vs. Flexcoat? 6,821  18  Mike Carnegie  07/30/2001 10:12PM 
Last Post by Joe
Jason St Croix.. Question 3,174  6  Dorge  07/30/2001 09:34PM 
Last Post by Chris-Flying Fish
For D. Boyle 2,684  2  Tom Kirkman  07/30/2001 09:02PM 
Last Post by Dave Boyle
Adjustable Disc Weights 2,662  3  Rob  07/30/2001 08:47PM 
Last Post by Todd
Adjusting height on high frame guides 2,687  2  Stephen Ashcraft  07/30/2001 01:05PM 
Last Post by Tom Kirkman
Ferrules 2,687  2  squid Jarboe  07/30/2001 12:37PM 
Last Post by Tom Kirkman
What do you put on an inscription?    Pages: 1 2 7,325  23  Billy 40  07/30/2001 03:28AM 
Last Post by Chef Jim
"cui setups" 2,840  8  John Mills  07/30/2001 01:59AM 
Last Post by Davesrod
rod blanks 2,931  5  squid Jarboe  07/29/2001 10:12PM 
Last Post by squid Jarboe
guide sizes for Rainshadow blank 2,871  3  Steve  07/29/2001 05:57PM 
Last Post by Robert Balcombe (REELMAN)
Thank You and the next question is 3,105  5  Warren  07/28/2001 07:09PM 
Last Post by William
Uses for Lathe Accessories?? 3,475  9  Steve S.  07/28/2001 06:33PM 
Last Post by Bruce Young
inscription finish problems 3,251  9  Ron Greenbank  07/28/2001 04:26PM 
Last Post by Kerry
Alvey Reels 2,829  5  John Bumstead  07/28/2001 12:02PM 
Last Post by John Bumstead
guide spacing on 5 6 weight 8 1/2 foot fly rod 2,723  3  Dale Cecil  07/27/2001 09:18PM 
Last Post by William
Guide size and height 2,854  4  Jim Reinhardt  07/27/2001 09:07PM 
Last Post by Pete
crappie rod 4,792  10  Bob Vasko  07/27/2001 04:11PM 
Last Post by Bob Vasko
Modulus 2,689  3  Rob  07/27/2001 03:28PM 
Last Post by Jason (St. Croix)
Rod blank stresses 3,589  4  Warren  07/27/2001 08:49AM 
Last Post by Tom Kirkman
Need help finding inlay foregrip 2,668  6  Lee Parsons  07/26/2001 12:07PM 
Last Post by TOM H.
inlays/sanding on hypolon grips 3,063  6  Buzz B  07/26/2001 06:26AM 
Last Post by Ed
Who has put an Outcast to the test? 2,864  3  Mike Bolt  07/25/2001 06:02PM 
Last Post by Mac
Wood spacer fitting 2,809  3  Peter  07/25/2001 02:20AM 
Last Post by Peter
One piece blanks 3,167  12  Bob Petti  07/24/2001 08:41AM 
Last Post by Tom Kirkman
ALVEY reel rod 4,948  6  Robert Balcombe (REELMAN)  07/24/2001 08:32AM 
Last Post by Stuart Mackenzie
Turks heads? 4,022  7  Mike Bolt  07/23/2001 08:16PM 
Last Post by Joe
need exposed reel seat, spin rod, 2,561  6  Buzz B  07/23/2001 07:48PM 
Last Post by Joe
Graphite Rings 2,598  4  Rob  07/23/2001 05:46PM 
Last Post by Bob McKamey
Effective modulus ? 4,265  14  Jim U  07/23/2001 04:20PM 
Last Post by Tom Kirkman
Cork Sealer U40 2,838  2  Chris-Flying Fish  07/23/2001 03:08PM 
Last Post by Wayne
Sponsor Links 2,677  6  LonnieD  07/23/2001 11:54AM 
Last Post by Tom Kirkman
G Loomis Hybrid HB70XH 3,754  2  Tony Tsai  07/23/2001 10:14AM 
Last Post by Tom Kirkman
the "CP" issue 3,127  8  Mike Bolt  07/23/2001 09:44AM 
Last Post by John Britt
Cutting Blanks? 2,752  4  Tom E.  07/23/2001 12:10AM 
Last Post by Patrick
Back Issue Alert 2,377  2  Tom Kirkman  07/22/2001 06:37PM 
Last Post by Mick
Guides for Avid 3S66ULF.... 2,857  5  Chuck S  07/22/2001 04:14PM 
Last Post by Dorge
"New and Improved Rod Bond" 2,990  9  Steve  07/22/2001 09:41AM 
Last Post by Tom Kirkman
Metallic thread 2,429  6  Mike Carnegie  07/21/2001 03:09PM 
Last Post by Billy 40
Why not set a standard? 3,435  6  Stephen Ashcraft  07/21/2001 02:29PM 
Last Post by Stephen Ashcraft
Help for Beginner 3,038  4  David Fullbright  07/21/2001 11:15AM 
Last Post by Rich
blanks for halibut 2,651  3  Greg Bigler  07/21/2001 02:47AM 
Last Post by Chef Jim
Cutting inlays for grips 3,267  5  Steve S.  07/20/2001 12:43PM 
Last Post by Izzy (formerly of Brooklyn)
Current Page: 1898 of 1903
Options:
Webmaster