I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Subject Views Posts  Started By  Last Post 
Removing fresh finish 2,480  Elrod  09/07/2001 08:06PM 
Last Post by Mark
tax ID? 2,817  jnail  09/07/2001 05:43PM 
Last Post by Mike Bolt
Short Pot life on LS SUpreme 2,573  Elrod  09/07/2001 04:08PM 
Last Post by Andy
trim wraps 3,271  mike  09/07/2001 03:40PM 
Last Post by Ron Styles
Rodmaker magazine 2,489  Bill OConnor  09/07/2001 11:33AM 
Last Post by MR
rod length 2,611  Jus  09/07/2001 04:55AM 
Last Post by Jus
update on finishing signatures 2,363  Bogie  09/06/2001 09:13PM 
Last Post by William
finish on blanks 2,430  jim  09/06/2001 07:07PM 
Last Post by Dan E
Spiral Wrap Question 5,281  Jim Kastorff  09/06/2001 02:39PM 
Last Post by Jim Kastorff
Cutting blanks 2,589  Ronald  09/06/2001 01:51PM 
Last Post by Tom Kirkman
First experience with LS Supreme 4,249  17  Mike Bolt  09/06/2001 01:46PM 
Last Post by Jeff Stickle
cutting blanks 2,591  jim  09/06/2001 12:16PM 
Last Post by Tom Kirkman
Machined Aluminum Reel Seats for Casting Rods 2,859  Tan Yik  09/06/2001 06:09AM 
Last Post by Tan Yik
new Cabelas blanks 2,820  Chris-Flying Fish  09/05/2001 09:37PM 
Last Post by Chris-Flying Fish
Cabelas Blanks 2,570  shaun  09/05/2001 09:34PM 
Last Post by Chris-Flying Fish
Blank finish Like Outcast 2,643  Warren  09/05/2001 08:37PM 
Last Post by Pete
Old Lamiglas Surf Blank very fuzzy 3,869  10  Dwayne Rye  09/05/2001 07:50PM 
Last Post by Todd
HELP! I Need Surf Rod Blank Suggestions 3,002  Chris  09/05/2001 07:23PM 
Last Post by Todd
Need guide wrap suggestions 2,772  Steve  09/05/2001 05:14PM 
Last Post by Wes
Rodmaker magazine 2,742  Bill OConnor  09/05/2001 10:40AM 
Last Post by Bill OConnor
Edit feature 2,638  Mike Bolt  09/05/2001 06:59AM 
Last Post by Mike Bolt
Mudhole drawing 2,463  Steve  09/05/2001 12:24AM 
Last Post by Tom McNamara
New Pacific Bay Web Site 2,899  Tom McNamara  09/04/2001 11:29PM 
Last Post by Tom McNamara
Thank You Richard'sRod&Reel 2,638  Warren  09/04/2001 09:23PM 
Last Post by Rich Garbowski
single thread trim bands 2,698  Dale Cecil  09/04/2001 08:29PM 
Last Post by William
spiral guide wrapping 2,837  Kerry  09/04/2001 08:26PM 
Last Post by William
RAINSHADOW 2,482  STEVE  09/04/2001 08:20PM 
Last Post by Coach
Towels, what kind lint free 3,000  elrod  09/04/2001 07:38PM 
Last Post by Ken
THREAD SEPARATION 2,921  STEVE D.  09/04/2001 05:12PM 
Last Post by Mike Bolt
Un -panted blanks 2,671  BigAl  09/04/2001 05:06PM 
Last Post by Mike Bolt
Coating over signature 2,277  Bogie  09/04/2001 11:15AM 
Last Post by Dick Jones
Boring Cork Rings 3,916  Billy 40  09/04/2001 10:21AM 
Last Post by Tom Kirkman
Clemens lathe report 2,841  elrod  09/04/2001 10:19AM 
Last Post by elrod
Crankbait rod revisit 2,597  elrod  09/04/2001 06:10AM 
Last Post by Jeff Stickle
looking for a rod builder 2,826  jnail  09/03/2001 09:22PM 
Last Post by STEVE D.
Filling the tunnel 2,444  Bob Petti  09/03/2001 02:28PM 
Last Post by Karen Balcombe
Destructive 2,344  elrod  09/03/2001 02:15PM 
Last Post by Karen Balcombe
Rod Building Supplies - September Rebate Program 3,151  Karen Hapka  09/03/2001 02:00PM 
Last Post by Karen Hapka
rod repair 2,636  RON  09/03/2001 01:25PM 
Last Post by Karen Balcombe
Single Thread Trim........ 2,577  Joe  09/03/2001 12:44PM 
Last Post by Dick Thurston
Loomis blanks 3,266  Mike Thompson  09/03/2001 12:37PM 
Last Post by Dick Thurston
Rainshadow Blanks 7,215  11  Eric  09/03/2001 12:30PM 
Last Post by Dick Thurston
How to choose action for spinning rod 3,503  Bob Petti  09/03/2001 12:05PM 
Last Post by Dick Thurston
combination fly/spin 2,740  Jay  09/03/2001 11:47AM 
Last Post by Dick Thurston
Cleaning wraps 2,642  Rob  09/03/2001 11:36AM 
Last Post by Dick Thurston
Decal 2,506  BigAl  09/03/2001 11:23AM 
Last Post by Dick Thurston
fly rod balancing 2,575  Tom C.  09/03/2001 09:49AM 
Last Post by Tom Kirkman
labels 2,358  allen glover  09/03/2001 12:09AM 
Last Post by Michael Brundridge
Missing Directions for LS Supreme 2,511  Duckwump  09/02/2001 11:03PM 
Last Post by Duckwump
Rainshadow and Forecast Components/ commercial message 2,859  14  Rich Garbowski  09/02/2001 09:48PM 
Last Post by Rich Garbowski
Options:
Webmaster