I nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2025 ICRBE
Custom Rod Symbol
Common Cents System
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods
Goto: Forum List•New Topic•Search•Log In Or Register
Current Page: 1891 of 1901
Subject Views Posts  Started By  Last Post 
Changing 7' blank to 8' 2,638  5  Steve  09/07/2001 11:52PM 
Last Post by Steve
Rod Wrappers 2,745  5  Joe T  09/07/2001 08:19PM 
Last Post by Dan Bryant
Size B thread were? 2,364  2  Ron Styles  09/07/2001 08:12PM 
Last Post by kel cheatham
Removing fresh finish 2,533  3  Elrod  09/07/2001 08:06PM 
Last Post by Mark
tax ID? 2,886  6  jnail  09/07/2001 05:43PM 
Last Post by Mike Bolt
Short Pot life on LS SUpreme 2,632  6  Elrod  09/07/2001 04:08PM 
Last Post by Andy
trim wraps 3,337  4  mike  09/07/2001 03:40PM 
Last Post by Ron Styles
Rodmaker magazine 2,555  6  Bill OConnor  09/07/2001 11:33AM 
Last Post by MR
rod length 2,692  5  Jus  09/07/2001 04:55AM 
Last Post by Jus
update on finishing signatures 2,422  2  Bogie  09/06/2001 09:13PM 
Last Post by William
finish on blanks 2,496  4  jim  09/06/2001 07:07PM 
Last Post by Dan E
Spiral Wrap Question 5,357  7  Jim Kastorff  09/06/2001 02:39PM 
Last Post by Jim Kastorff
Cutting blanks 2,653  2  Ronald  09/06/2001 01:51PM 
Last Post by Tom Kirkman
First experience with LS Supreme 4,356  17  Mike Bolt  09/06/2001 01:46PM 
Last Post by Jeff Stickle
cutting blanks 2,656  6  jim  09/06/2001 12:16PM 
Last Post by Tom Kirkman
Machined Aluminum Reel Seats for Casting Rods 2,918  1  Tan Yik  09/06/2001 06:09AM 
Last Post by Tan Yik
new Cabelas blanks 2,892  1  Chris-Flying Fish  09/05/2001 09:37PM 
Last Post by Chris-Flying Fish
Cabelas Blanks 2,635  5  shaun  09/05/2001 09:34PM 
Last Post by Chris-Flying Fish
Blank finish Like Outcast 2,711  2  Warren  09/05/2001 08:37PM 
Last Post by Pete
Old Lamiglas Surf Blank very fuzzy 3,960  10  Dwayne Rye  09/05/2001 07:50PM 
Last Post by Todd
HELP! I Need Surf Rod Blank Suggestions 3,061  4  Chris  09/05/2001 07:23PM 
Last Post by Todd
Need guide wrap suggestions 2,847  3  Steve  09/05/2001 05:14PM 
Last Post by Wes
Rodmaker magazine 2,827  1  Bill OConnor  09/05/2001 10:40AM 
Last Post by Bill OConnor
Edit feature 2,712  1  Mike Bolt  09/05/2001 06:59AM 
Last Post by Mike Bolt
Mudhole drawing 2,538  3  Steve  09/05/2001 12:24AM 
Last Post by Tom McNamara
New Pacific Bay Web Site 2,968  1  Tom McNamara  09/04/2001 11:29PM 
Last Post by Tom McNamara
Thank You Richard'sRod&Reel 2,711  2  Warren  09/04/2001 09:23PM 
Last Post by Rich Garbowski
single thread trim bands 2,767  3  Dale Cecil  09/04/2001 08:29PM 
Last Post by William
spiral guide wrapping 2,927  6  Kerry  09/04/2001 08:26PM 
Last Post by William
RAINSHADOW 2,548  3  STEVE  09/04/2001 08:20PM 
Last Post by Coach
Towels, what kind lint free 3,087  4  elrod  09/04/2001 07:38PM 
Last Post by Ken
THREAD SEPARATION 2,989  5  STEVE D.  09/04/2001 05:12PM 
Last Post by Mike Bolt
Un -panted blanks 2,746  4  BigAl  09/04/2001 05:06PM 
Last Post by Mike Bolt
Coating over signature 2,361  5  Bogie  09/04/2001 11:15AM 
Last Post by Dick Jones
Boring Cork Rings 3,995  9  Billy 40  09/04/2001 10:21AM 
Last Post by Tom Kirkman
Clemens lathe report 2,911  1  elrod  09/04/2001 10:19AM 
Last Post by elrod
Crankbait rod revisit 2,666  7  elrod  09/04/2001 06:10AM 
Last Post by Jeff Stickle
looking for a rod builder 2,896  9  jnail  09/03/2001 09:22PM 
Last Post by STEVE D.
Filling the tunnel 2,521  3  Bob Petti  09/03/2001 02:28PM 
Last Post by Karen Balcombe
Destructive 2,421  5  elrod  09/03/2001 02:15PM 
Last Post by Karen Balcombe
Rod Building Supplies - September Rebate Program 3,227  1  Karen Hapka  09/03/2001 02:00PM 
Last Post by Karen Hapka
rod repair 2,708  3  RON  09/03/2001 01:25PM 
Last Post by Karen Balcombe
Single Thread Trim........ 2,638  4  Joe  09/03/2001 12:44PM 
Last Post by Dick Thurston
Loomis blanks 3,344  9  Mike Thompson  09/03/2001 12:37PM 
Last Post by Dick Thurston
Rainshadow Blanks 7,289  11  Eric  09/03/2001 12:30PM 
Last Post by Dick Thurston
How to choose action for spinning rod 3,580  7  Bob Petti  09/03/2001 12:05PM 
Last Post by Dick Thurston
combination fly/spin 2,801  3  Jay  09/03/2001 11:47AM 
Last Post by Dick Thurston
Cleaning wraps 2,720  4  Rob  09/03/2001 11:36AM 
Last Post by Dick Thurston
Decal 2,565  6  BigAl  09/03/2001 11:23AM 
Last Post by Dick Thurston
fly rod balancing 2,629  3  Tom C.  09/03/2001 09:49AM 
Last Post by Tom Kirkman
Current Page: 1891 of 1901
Options:
Webmaster