I nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods
Goto: Forum List•New Topic•Search•Log In Or Register
Current Page: 1883 of 1895
Subject Views Posts  Started By  Last Post 
Request from Romania 2,287  5  Tom Kirkman  10/02/2001 09:08PM 
Last Post by Pete
Roller Guides vs LS Supreme. . . 3,035  10  Chef Jim  10/02/2001 05:04PM 
Last Post by Mike Bolt
lathe 2,019  3  Larry  10/02/2001 09:40AM 
Last Post by Tom Kirkman
Sponsors 2,028  3  Tom Kirkman  10/01/2001 09:45PM 
Last Post by Moderator #2
LS Supreme over LS 2000 2,113  2  Bob Petti  10/01/2001 02:11PM 
Last Post by Tom Kirkman
Finishing over decals 2,337  5  LJH  10/01/2001 12:43PM 
Last Post by John Britt
blank suggestion 1,992  4  Dan E  10/01/2001 12:07PM 
Last Post by Elrod
Old post with "new" beside them 2,236  6  Steve  10/01/2001 04:40AM 
Last Post by Steve
just want to say 2,096  4  Kevin  10/01/2001 03:29AM 
Last Post by Bob Balcombe (REELMAN)
shark rod pages gone??? 2,097  4  darren  10/01/2001 03:26AM 
Last Post by Bob Balcombe (REELMAN)
Cork Filler? 2,253  2  Gadwall8  10/01/2001 03:11AM 
Last Post by Bob Balcombe (REELMAN)
wood reel seat 1,945  3  bill mathis  09/30/2001 11:13PM 
Last Post by bill mathis
pop rod for SM 2,028  6  Kevin  09/30/2001 10:16PM 
Last Post by Mike Thompson
Fuji Guide Setup Question 2,032  3  HPB  09/30/2001 08:48PM 
Last Post by Russell
cutting a blank tip 2,258  3  Warren  09/30/2001 08:05PM 
Last Post by William
Black Thread 2,094  6  Ellis Mendiola  09/30/2001 05:53PM 
Last Post by Jim Gaskins
Pigment for Perma-Gloss 2,001  5  Steve  09/30/2001 05:04AM 
Last Post by Bob Balcombe (REELMAN)
Cork Stains 1,862  2  Rick Y  09/30/2001 04:48AM 
Last Post by Bob Balcombe (REELMAN)
Talon and Diamondback blanks 2,040  3  Elrod  09/29/2001 12:21PM 
Last Post by Wes
Stand-up rods reel seat 2,353  6  chris-flying fish  09/29/2001 01:59AM 
Last Post by Chef Jim
Pac Bay follow up call 1,855  8  Bill OConnor  09/28/2001 11:01PM 
Last Post by Eddie Pullen
Thank you Rich 2,226  1  Larry Richards  09/28/2001 10:49PM 
Last Post by Larry Richards
Tip Top size ? 2,015  5  Larry Richards  09/28/2001 09:49PM 
Last Post by Billy 40
Questions from the RD resident dummy 2,149  2  Warren  09/28/2001 09:09PM 
Last Post by William
attn vendors, need some twist thread, and braided butt 2,141  4  Buzz B  09/28/2001 05:02PM 
Last Post by Buzz B
Idea for ROD MAKER Magazine 1,911  4  Mark Schulte  09/28/2001 04:05PM 
Last Post by Tom Kirkman
Pac Bay Customer Service 2,115  1  Bill OConnor  09/28/2001 03:35PM 
Last Post by Bill OConnor
Archive length question 2,025  2  Ray  09/28/2001 09:16AM 
Last Post by Tom Kirkman
30 RPM DRYING MOTOR? 5,273  13  KEVIN  09/28/2001 07:11AM 
Last Post by Panchdara
Spinning rod guide quandry 2,441  9  Warren  09/27/2001 10:49PM 
Last Post by Mike Bolt
St Croix Kits 1,811  6  Mike B.  09/27/2001 09:41PM 
Last Post by Mike Thompson
Straight edge method 1,825  2  John  09/27/2001 05:02PM 
Last Post by Tom Kirkman
Spline - where'd this term come from 1,839  6  Billy 40  09/27/2001 02:16PM 
Last Post by shaun
Crushing Rod Blanks? 1,794  6  Ed  09/27/2001 12:44PM 
Last Post by shaun
Laser Printer 1,700  3  elrod  09/27/2001 12:00PM 
Last Post by Russell
Lathe options 1,984  6  Don Baker  09/27/2001 11:33AM 
Last Post by elrod
fly reel seat question 1,772  3  Dan E  09/27/2001 10:50AM 
Last Post by Mike Moran
multirod drying motors 1,888  4  allen  09/26/2001 10:26PM 
Last Post by allen
Rod Maker Magazine does it again 2,049  10  Tom McNamara  09/26/2001 08:07PM 
Last Post by Russell
sponsorship costs 1,749  2  Barry Thomas Sr  09/26/2001 08:04PM 
Last Post by Moderator
sunfish weave patern 1,817  1  jnail  09/26/2001 03:04PM 
Last Post by jnail
T&T rod turner? 1,817  4  Rick M.  09/26/2001 02:15PM 
Last Post by jnail
Ice Rod Blanks 1,710  2  Terry Stupp  09/26/2001 10:46AM 
Last Post by Tom Kirkman
rod specs 1,736  3  Dan E  09/26/2001 02:16AM 
Last Post by Karen Balcombe
mentor 2,063  1  Franz  09/26/2001 01:51AM 
Last Post by Franz
RainShadow blanks 1,991  2  Steve  09/25/2001 09:23PM 
Last Post by Don Morton
Recipe for gold and silver on printer 1,965  5  elrod  09/25/2001 08:16PM 
Last Post by William
RENZETTI LASER 2,628  6  fred schoenduby  09/25/2001 04:50PM 
Last Post by lily
Rod Lathe 1,855  3  David Teague  09/25/2001 04:44PM 
Last Post by lily
Author Info in Messages 1,673  3  Ed  09/25/2001 03:24PM 
Last Post by Dave F.
Current Page: 1883 of 1895
Options:
Webmaster