I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2019 EXPO
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rougarou Rods
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

T&T rod turner?
Posted by: Rick M. (---.proxy.aol.com)
Date: September 25, 2001 12:40PM

A couple years back I saw an ad for a rod turner for drying finish. It was battery powered by 2 'D' cells and was said to run for up to 20 hours. I cannot remember the name or where I saw it. Anyone know anything about these units or where I might be able to find them? I think the name was T&T or T&D or something similar.

Options: ReplyQuote
K&D Turner
Posted by: Russell (---.proxy.aol.com)
Date: September 25, 2001 08:57PM

It's called a K&D turner. I had one but no longer. Do not know if they are still made but with the proper name you may be able to do a search and find them.

Options: ReplyQuote
Re: K&D Turner
Posted by: allen (---.ucc.usyd.edu.au)
Date: September 26, 2001 12:58AM

just saw and interesting battery powered drying motor over at the flexcoat site called and RP7 or some such

www.flexcoat.com

allen

Options: ReplyQuote
Re: K&D Turner
Posted by: jnail (---.unitelc.com)
Date: September 26, 2001 02:15PM

flex coat has one, looks like a flashlite body that takes the big square battery , 6V I beleive, with a motor on top. I am pretty sure that cabela's has them in there tackle craft catalog, but I don't know who else has them.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster