I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2019 EXPO
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rod Components USA
Rougarou Rods
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Rod Lathe
Posted by: David Teague (216.80.238.---)
Date: September 25, 2001 09:15AM

Looking to purchase a new rod lathe if I can come up with the bucks.
Do the Clemens or Renzetti come with a motor? Which options are needed and which are best?

Options: ReplyQuote
Re: Rod Lathe
Posted by: Tom Kirkman (---.dialinx.net)
Date: September 25, 2001 09:38AM

Various motor options are available with both. On either one I would highly recommend the 1/10 Dayton with solid state foot control. Enough power to shape about anything you would want to shape on a light duty lathe, and yet very responsive for wrapping.

If you want to extend the capabilities of the lathe, get a live center, a boring tailstock and tool rest and it becomes an all-in-one rod building center. Now you can not only wrap, but also bore, turn and shape things like seat inserts, butt caps and plugs, hosels, reel seat arbors, etc.

..........................................

Options: ReplyQuote
Re: Rod Lathe
Posted by: lily (---.ppp.mpinet.net)
Date: September 25, 2001 04:44PM

The 1/10hp is a good choice. The motor that you choose will depend on what operations you will be doing. Our Rod Lathe has been in the market for many years. There are a number of accessories available that will make your daily operations easier.
Check out out website and please contact us if you wish,
www.renzetti.com
Lily

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster