I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2019 EXPO
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rougarou Rods
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Current Page: 14 of 1392
Subject Views Posts  Started By  Last Post 
Guide tip removal on a factory rod    Pages: 1 2 808  21  Jeremy Lee  02/12/2019 06:18AM 
Last Post by Anthony Unger
What happened to rogue rod blanks? 711  Travis Thompson  02/01/2019 03:06PM 
Last Post by Travis Thompson
Spiral Wrap Rollers 480  Mark Talmo  02/03/2019 04:34PM 
Last Post by Mark Talmo
Pulling the loop.. Thread at 90° or 45° to finish? 782  20  Anthony Unger  02/01/2019 05:42PM 
Last Post by Ed Kramer
Crappie Jigging Rod 435  Seth Johnson  02/26/2019 09:35PM 
Last Post by Norman Miller
Wooden handles.. Directly on the blank? Or have a barrier to protect? 490  11  Anthony Unger  01/31/2019 11:22PM 
Last Post by Anthony Unger
Fixing an old graphite rod with a cracked butt 472  14  Jeremy Lee  02/01/2019 02:00PM 
Last Post by Jeremy Lee
Cap or plug for Fuji DPSM seat 343  Seth Johnson  01/30/2019 05:43PM 
Last Post by Seth Johnson
Special Thanks 619  15  Jim Ising  02/05/2019 12:05AM 
Last Post by Robert Dittert III
2019 Expo Exhibitors 488  Tom Kirkman  01/30/2019 10:30AM 
Last Post by Tom Kirkman
Epoxy finish over Super Glue any problems?? 496  Michael Sutheimer  01/30/2019 08:18AM 
Last Post by John DeMartini
Power Wrapper Plastic Rod Stand w/ Rollers 702  14  Greg M. Ray  01/31/2019 01:09PM 
Last Post by Murray Tucker
Temperature for Removing Epoxy 659  12  Tony Scott  01/30/2019 03:33PM 
Last Post by Anthony Unger
Blank recommendation ? 590  Steve Eanes  01/29/2019 11:58AM 
Last Post by Phil Erickson
gorilla glue 766  12  robert taylor  01/30/2019 08:35PM 
Last Post by David Baylor
Don't freak out, this is how we do it.    Pages: 1 2 1,545  24  John Cates  02/04/2019 07:23AM 
Last Post by Michael Tarr
re: meet the Batson family 503  Lynn Behler  01/29/2019 05:44PM 
Last Post by Lynn Behler
New Grips 540  Eric Hanson  01/28/2019 03:22PM 
Last Post by Eric Hanson
What size threads are these?    Pages: 1 2 853  23  Jeremy Lee  02/03/2019 02:08PM 
Last Post by ron zimmerman
New Issue 439  Tom Kirkman  01/28/2019 10:18AM 
Last Post by Tom Kirkman
Recoil guides ? 589  Brad Kimbrell  01/28/2019 08:20AM 
Last Post by Herb Ladenheim
Quilted Poplar 414  Steven Kincaid  01/27/2019 04:21PM 
Last Post by Steven Kincaid
Best Dryfly-Blank 823  20  Michel Schoenbrock  02/02/2019 10:44AM 
Last Post by Michel Schoenbrock
What is a good thread finish for low build, keeping the 'satin' look? 642  11  Anthony Unger  01/29/2019 08:46PM 
Last Post by Anthony Unger
feather inlay 496  larry basilio  01/29/2019 06:50PM 
Last Post by larry basilio
RV6 514  Steven Bloomfield  01/26/2019 09:15PM 
Last Post by Steven Bloomfield
What’s the best epoxy? 701  12  Michael Tarr  01/27/2019 12:47AM 
Last Post by herb canter
pine bark handle 436  Sam Johns  01/26/2019 07:30PM 
Last Post by Sandy Harris
Guide suggestion for black hole 6'6" offshore blank 362  Eddie Anderson  01/26/2019 07:55AM 
Last Post by Mark Brown
Info about cork on mhx fly blank. 501  Stefano Plebani  01/26/2019 03:25PM 
Last Post by Tom Wewerka
Expo Exhibitor Update 430  Tom Kirkman  01/25/2019 11:01AM 
Last Post by Tom Kirkman
Fuji K Train For Spinning Rod 645  15  Ryan Dietman  02/01/2019 10:24AM 
Last Post by Rick Elrod
Tip top 524  Mark Brown  01/27/2019 12:50AM 
Last Post by Michael Sutheimer
Thingamajig that latches on a bare blank tip with weight to check action and power... 607  Mo Yang  01/30/2019 12:02PM 
Last Post by Jim Ising
How can I determine a rods action ? 561  15  ron zimmerman  01/28/2019 06:22PM 
Last Post by Michael Danek
Meet the Family: Bill Batson 634  James Taylor  01/28/2019 05:46PM 
Last Post by James Taylor
Microlight Rod Blank 640  15  Bruce Litton  01/25/2019 12:45PM 
Last Post by Phil Ewanicki
4 point star 469  Paul Luechtefeld  01/23/2019 11:12PM 
Last Post by Paul Luechtefeld
Source for Fiberglass Spigot Ferrules 426  Philip Levine  01/29/2019 08:54PM 
Last Post by Philip Levine
Expo Seminars 438  Tom Kirkman  01/23/2019 06:01PM 
Last Post by Tom Kirkman
Need some help again on guide train 508  12  Ken Patek  01/24/2019 09:37AM 
Last Post by Ken Patek
Surf rod handle 372  Chris Forslund  01/24/2019 02:21PM 
Last Post by Mark Hahn
Free Vintage Horrocks Ibbotson bamboo rod bottoms 398  James Knopp  01/22/2019 10:42PM 
Last Post by James Knopp
BUY / SELL, I AM NOT A ROBOT LINK 704  15  Barry Thomas Sr  01/31/2019 05:51PM 
Last Post by Barry Thomas Sr
roller guide rod 321  David Parsons  01/22/2019 01:00PM 
Last Post by roger wilson
Epoxy Temperature 685  Ed Kramer  01/27/2019 09:44PM 
Last Post by Ed Kramer
Rod geeks 2 piece 633  13  Jeremy Pollack  01/22/2019 06:27PM 
Last Post by herb canter
Microwave on steelhead rod 515  Mark D Schulte  01/24/2019 08:19PM 
Last Post by Mark D Schulte
Post taken down? 643  Paul Luechtefeld  01/23/2019 09:26PM 
Last Post by Paul Luechtefeld
Loomis rod blanks 680  Joe Kuba  01/21/2019 08:14PM 
Last Post by Spencer Phipps
Current Page: 14 of 1392
Options:
Webmaster