nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

ICRBE 2020
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BRC Rods
Bingham Enterprises
Cork Specialties LLC
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
REC Components
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
The Rod Room
Trondak U-40
Utmost Enterprises

Current Page: 13 of 1417
Subject Views Posts  Started By  Last Post 
Thank you rod building. 570  roger wilson  01/17/2020 06:40PM 
Last Post by ron zimmerman
Winn Grip Durability 698  11  Jay Burns  01/15/2020 04:28PM 
Last Post by ben belote
Aluminum Winding Check Source 509  Michael Sutheimer  01/15/2020 10:17PM 
Last Post by Michael Sutheimer
Expo Exhibitor Update 353  Tom Kirkman  01/13/2020 10:54AM 
Last Post by Tom Kirkman
Guide prep tool 895  18  roger wilson  01/14/2020 03:38PM 
Last Post by Dan Ertz
Hydra blanks? 640  Mark D Schulte  01/23/2020 06:48PM 
Last Post by Brian Cheung
Last Post by Aleks Maslov
Guide spacing resource 667  Wes Woods  01/16/2020 08:45AM 
Last Post by Steve Gardner
caring for nickel silver hardware 411  Jack Duncan  01/13/2020 09:30AM 
Last Post by Herb Ladenheim
Power wrapper motor speed reduction 508  10  Dean Christian  02/13/2020 08:13AM 
Last Post by Dean Christian
Single wrap inlay 693  10  Christopher Zucker  01/13/2020 11:36AM 
Last Post by Christopher Zucker
reel recommendation 589  13  sean flynn  01/24/2020 02:47AM 
Last Post by Jean Scurtu
GEN 4 (Coming Soon) 1,060  11  Bingham Ent  02/18/2020 03:18PM 
Last Post by Jay Burns
Cork and Acrylic Handle 496  Chase Timmons  01/13/2020 11:56AM 
Last Post by Chase Timmons
Cork tape, Heat shrink tubing, and a reel seat 419  John Esler  01/10/2020 09:58PM 
Last Post by Mark Talmo
DC motor conversion for new Alps wrapper 539  roger wilson  01/11/2020 01:03AM 
Last Post by roger wilson
Mounting the Sea Guide XCSS reel seat 513  Greg Marshall  01/10/2020 08:55AM 
Last Post by Rick Hall
Lamiglas rods 755  Jerry Downie  01/13/2020 08:53PM 
Last Post by Bob Jordan
Rod Show? 654  Kevin Bogan  01/13/2020 06:34AM 
Last Post by Mark Hahn
Redoing guides on rod (Need Advice) 636  17  Jason Yu  01/10/2020 06:15PM 
Last Post by Lynn Behler
Thread Epoxy on Matte Finish Blanks 612  11  Butch Cross  01/15/2020 07:54PM 
Last Post by ron zimmerman
stlye vs function    Pages: 1 2 1,159  32  Ken Brown 2  01/20/2020 07:31AM 
Last Post by Billy Vivona
Expo Exhibitor Update 398  Tom Kirkman  01/07/2020 02:37PM 
Last Post by Tom Kirkman
New Sponsor 549  Tom Kirkman  01/07/2020 10:10AM 
Last Post by Tom Kirkman
Light suggestions 580  11  John Duncan  01/08/2020 12:06PM 
Last Post by Ken Brown 2
Mono vs Braid vs Guide layout 603  Jess Brindisi  01/08/2020 10:04AM 
Last Post by Norman Miller
7ft 4-Piece Ultra Light CF Pac-Rod? 404  Mark Talmo  01/08/2020 04:33AM 
Last Post by Michael Sutheimer
Another Guide Layout Question- Point Blank rod 431  Dennis Penton  05/12/2020 09:57AM 
Last Post by Dennis Penton
Comparable blank to BVJ60325 266  John Johns  01/06/2020 04:45PM 
Last Post by John Johns
Micro Guide Spacing 593  11  Robby Shumate  01/07/2020 12:17PM 
Last Post by Jim Ising
Blank Frequency 674  Jeffrey D Rennert  01/07/2020 04:52PM 
Last Post by Michael Danek
TKWT Torzite problems 814  18  Adam S McClain  01/12/2020 02:28AM 
Last Post by Adam S McClain
What is the Most Important (First to Buy) Lathe Tool?    Pages: 1 2 890  25  Mark Talmo  01/09/2020 11:55AM 
Last Post by roger wilson
Full wells or half wells that is the question 585  19  Mark D Schulte  01/08/2020 10:29AM 
Last Post by Tom Kirkman
Sage 7140 X 4 piece Guide spec and spacing 343  BILLY NELSON  01/05/2020 08:39PM 
Last Post by Phil Erickson
Wife's hot glue for tip of rod    Pages: 1 2 937  21  Brandon Giles  01/05/2020 06:19PM 
Last Post by herb canter
A short video on the background to VisualWRAP 463  David Boyle  01/03/2020 11:13PM 
Last Post by Mark Talmo
Mud Hole 866  Scott Grady  01/04/2020 10:00PM 
Last Post by david taylor
Custom KR-Concept Choke Point 686  15  Jeffery Duran  01/05/2020 09:08PM 
Last Post by Michael Danek
Reel Seat- threads front or back    Pages: 1 2 974  22  Wes Woods  01/04/2020 06:04PM 
Last Post by Steve Gardner
Magnifier 621  Bill Break  01/10/2020 04:35AM 
Last Post by Scott Giaquinto
handle length 652  13  sean flynn  01/02/2020 04:26PM 
Last Post by Lynn Behler
Thread Wrapping 772  10  Jeffrey D Rennert  01/02/2020 09:14PM 
Last Post by Mark Hahn
Citri Strip 609  15  David Baylor  01/08/2020 05:05PM 
Last Post by Lynn Behler
Transition Guide size 471  Steve Cox  01/07/2020 05:00PM 
Last Post by Steve Cox
CERecoil guides for Fly rod stripping guides 490  Andrew kelly  12/31/2019 12:04PM 
Last Post by Andrew kelly
Expo Exhibitor Update 359  Tom Kirkman  01/09/2020 11:16AM 
Last Post by Dan Grulke
HAPPY AND HEALTHY NEW YEAR TO ALL 288  Herb Ladenheim  01/02/2020 08:32AM 
Last Post by Ken Brown 2
Fuji Ultra Poly Thread 633  Dennis Herold  01/01/2020 08:36AM 
Last Post by Fred Yarmolowicz
For David Baylor 356  Lynn Behler  12/31/2019 07:00PM 
Last Post by Lynn Behler
Current Page: 13 of 1417