SPONSORS
2024 ICRBE EXPO |
Results 91 - 120 of 365
11 years ago
David Sytsma
91. Painted blanks
I know blanks can be painted. Do you coat the painted blank with finish to protect the paint? Another question: Has anyone ever had a blank "dipped" in a camo or other pattern like they do with guns? if so, where did you have it done, and how much did it set you back?
Forum: rodboard 11 years ago
Chris Phillips
92. painting blanks
New project dictates painting a part of the blank White. Opinions welcome as to which is the best way to go about painting a blank in white color. Thanks
Forum: rodboard 11 years ago
Jan Lamprecht
I am new to rodbuilding and maybe it is stupid question . How do I change the colour of the blank ie. green or yellow ?
Spray , paint , How and what do I do ?
Thanks
Jan
Forum: rodboard 11 years ago
adam norris
Has anyone ever had a body repair service spray and clear a rod blank? If so, how did it work out?
I was wondering about some issues:
Does the clear stiffen the rod more?
Does the epoxy adhere well after clear? Adverse Reactions?
Durability of the paint?
Any and all replies appreciated.
Forum: rodboard 11 years ago
Marco Antonio
I have a question to friends.
Someone is having a problem with the painting of St. Croix blanks?
There is a time ago I made a purchase of 98 blanks, 50 units of Blank SCV with the new finish and they are peeling, and are coming out with the glue, when the tie passdores or do a twisted it becomes more marked and a number of problems and now that I've ridden all starting to have problems with
Forum: rodboard 11 years ago
Tony Scott
I have an older Sage fly rod and asked the factory what coating they use on their blanks and they said Flex Coat High Build.
I find it interesting they would not use something more like a Perma Gloss or Lumi Seal. Would high build epoxy be protective enough? I have two sections that are pretty scuffed up and I want to protect them.
One related question - if I do decided to use Perma Gloss
Forum: rodboard 12 years ago
Scott Backholm
Hello all, do they exist yet? 2 piece white blanks? or coming soon?
Thanks!!
Scott
Forum: rodboard 12 years ago
Franck ZENK
98. Blank painting
Hello everyone,
I plan to paint a blank, and I would like to know if someone have ever used Lumiseal or Permagloss as finish, without any problem ?
I have read that Lumiseal and Permagloss have a hot catalysts, and I am afraid by paint unsticking.
I will try to paint and finish the blank in rotation to make a "sheathing" of paint and finish on the blank, for assure a good pain
Forum: rodboard 12 years ago
Tim Flaherty
I have a new fiberglass blank that i want to paint. have no idea on where to start any help would be great
Forum: rodboard 12 years ago
jeremy airey
100. A 'special' rod
Hi Chaps
Been a long while and a lot of fishing since my last post. I've posted this on a few of our UK boards but no takers as yet so I thought I'd give you chaps a go at it as you will understand the 'why' of it better than most UK anglers.
Now I need your help with a 'project' for a new rod I want to create. I am wanting to build a glass/carbon hybrid not composite 7 foot ish light lure
Forum: rodboard 12 years ago
Paul Pollaccia
I scuffed up an old rod blank, and painted it with krylon fusion paint. Has anyone used this product. Does anyone know if this paint will flake off? Thanks in advance
Forum: rodboard 12 years ago
Nick Philippa
102. Ugly blanks..
Hey guys,
I got some blanks from the mudhole blowout and several of them seem faded or have been rubbed against something for part of the blank.
What's the best way for me to tidy up these blanks? If I paint the blanks I'll have to epoxy the whole length to ensure the paint doesn't come off, right?
Thank you.
Forum: rodboard 12 years ago
Mud Hole Custom Tackle
The wait is over. You've spoken and the MHX Team listened. The new MHX White blanks are now available. Our most popular models, are now available in an elegant white finish. But this is no ordinary paint job. This is a high-gloss UV-resistant automotive finish that will never yellow.
The following models are available in white:
MB843
MB844
MB874 (coming soon)
SJ842
SJ843
SB812
DS822
Forum: rodboard 12 years ago
Casey Abell
So what materials are out there to paint an entire rod with and what are you guys using for clear????
Seems like I read somewhere on here that people were using some sort of urethane? Has anyone tried automotive base / clear system. If im not mistaken the base / clear systems is also urethane.
Thanks
Forum: rodboard 12 years ago
Christopher Duncan
Someone posted once about using a can with rubber the end and paint in the middle to paint a blank quickly. If someone could please explain this in better detail I would greatly appreciate it. I would like to paint a few blanks, and this sounds like an interesting way to do it. Any and all help would be wonderful.
Forum: rodboard 12 years ago
Jeff Frei
106. painting rods
I painted a couple of rods for my grandkids. The Fusion can states chip resistant after 7 days. The kids are only 7 and 10 so I want extra protection, so I want to clearcoat the rods also. Do you builders that paint, clearcoat before or after the guides are on? Is it necessary to wait 7 days before applying the guides? What have you all found to work?
Thanks, Jeff Frei
Forum: rodboard 12 years ago
Michael Shewell
108. SANDED OR UNSANDED
I have been offered a 6' 6" Loomis rod that is sanded.
Why would you sand a blank.
Forum: rodboard 13 years ago
lorenzo tellez
everywhere i go all i see are matte and slate finishes on rod blanks, who and where can i go to get anotherr colored finish on a rod, i am looking to get like 4 different actions and power. anybody!
Forum: rodboard 13 years ago
Garry Hall
110. Custom Paint Job
I had a potential customer approach me that is a big bass tournament fisherman and inquired about a custom colored rod. We discussed it and I mentioned a few possibilites. I spent a few years in the automotive industry and thought about a body shop to do what he desires. Have any of you ever "farmed" out or had a blank painted by a body shop? In my estimation they would be the best
Forum: rodboard 13 years ago
BILL EASTON
I have decided to go with kustom shop paints and Urethane's to paint my blanks. My question is can i spry the Urethane through an air brush with 58psi compressor. or do I need a paint gun and larger compressor.
Forum: rodboard 13 years ago
Jay Burns
Hey guys winter has set in and its time to prep for next season as there isnt much else to do up here. I wanted to piggy back on another thread that was started so I can begin the process of painting some blanks custom this offseasn, but have never done anything like this. I have read a bunch of past threads but wanted to pick your brains:
1.) I will be painting mostly Baston graphite blank
Forum: rodboard 13 years ago
Hal Lambert
113. Rod painting problem
Been painting a bunch of blanks lately and have ran into a particular problem a few times. On 2 blanks the paint has been crackling on one axis for about 1ft.. Each blank has been sanded/deglossed and wiped clean (water and cloth) paying attention to keep my oily hands off of the blank. I have resanded each and removed the imperfections wiped clean (water and cloth again) and the problem retu
Forum: rodboard 13 years ago
Jim Creed
114. balance
working on a 7' spinning rod, i personally like the rod to feel balanced, not tip heavy, with rod balanced, may be a bit heavy after guides but not much, i tried to figure that in, she feels pretty good till you put the reel on then i have to admit she feels a little heavy, this is the reel that will go with rod, should i forget the balance part,
i know there has been a lot said on here about
Forum: rodboard 13 years ago
Isaiah Bumagat
115. Painting Blank
I was pondering painting a blank white and wanted some input in to how I should go about doing it. The blank in quesiton is painted and was wondering if I should strip the current finish or just paint over it. I know painting is another issue, but Im hoping your comments will shed some light for me.
Forum: rodboard 13 years ago
Jay Burns
Would like to build a few quality rods this winter and was hoping to spice things up and was wondering if anyone has any information on where to buy a quality colored or painted blank. Any info would be great - looking for a solid blank.
Forum: rodboard 13 years ago
Thomas Brown
117. White Thread
I am building a North Carolina State Rod for my dad. In the past I have used Pac Bay NCP White thread, but it seems to look a little grey on a black blank after epoxy. The blank is black. Any suggestions on the whitest thread? Should I use the NCP white and CP?
thanks,
Thomas
Forum: rodboard 13 years ago
Vince Nadosky
I have several rods orders where painting of blanks will be necessary. I will be coating them with lumiseal after painting. So I make sure I have plenty of Lumiseal on hand how many blanks can i coat with say a 4 ounce bottle of lumiseal.
Thank you in Advance
Vince Nadosky
Forum: rodboard 14 years ago
Steve Burdick
Yesterday I had a request for a blank that had a clear top like the ugly stick but without the solid glass. The customer likes the being able to see the tip but doesn't like the weight. Looking for a 6.5' to 7.5' med action 8 to 12 lb. line. for fresh water wipers. Have any of you seen anything like this or know where I might be able to get one. I haven't..............thats why I'm asking y'all.
Forum: rodboard 14 years ago
Howard Bates
120. Painting Blanks
I'm new to the forum and rod building. I have one question though, I want a colored blank, and I was told I could paint the blank any color I choose. What paint works the best and will it hold up in tournament fishing. Thanks
Forum: rodboard |