SPONSORS
2024 ICRBE EXPO |
Results 121 - 150 of 168
12 years ago
ricky espenschied
Anglers workshop has 1 and 2 piece blanks. (anglers im6 spinning blanks) burgundy in color. also tag sez handcrafted in the u.s.a.
Forum: rodboard 12 years ago
ricky espenschied
Tried to link this. No luck. But if you get time google komu under news tab go to Sarahs stories. I think this is pretty special. ricky
Forum: rodboard 12 years ago
ricky espenschied
123. Re: First Rod Blues
you should be able to adjust them after they are wrapped to get them lined up.
Forum: rodboard 12 years ago
ricky espenschied
dont know were you ordered from.,but anglers workshop list that seat on there site
Forum: rodboard 12 years ago
ricky espenschied
I did a pink blank for my daughter in law using the american tackle HHRLA A frame spinning guides.I did a threadless guide but they would look good with a pink thread wrap
Forum: rodboard 13 years ago
ricky espenschied
127. Re: Perfect rod
Maryann i do not have near the time in that most of the guys and girls on this forum do. But my guess is just what you said in your first post and you are just over thinking the problem, that probably is not even a problem. any way you could post a pic. of what you think is wrong? ricky
Forum: rodboard 13 years ago
ricky espenschied
128. Re: Perfect rod
Maryann if you dont have it Toms book (rod building guide) does a very good job of telling and showing how.
Forum: rodboard 13 years ago
ricky espenschied
this was my first large blank with eva. the one thing that did happened was that when the rear grip was in place the teton for the reelseat did expaned some and had to be turner down a little. maybe should have reamed it a little more. this was a different game than the light and ultra lite rods i have been using eva grips on. (always something to learn) ricky
Forum: rodboard 13 years ago
ricky espenschied
thanks roger, the reason i ask is the last rod i built had a .618 butt and split grip was .450 hard eva. i did ream it some and worked fine. you are right running the bit like you say would be dangerous especialy on a small fighting butt. thanks ricky
Forum: rodboard 13 years ago
ricky espenschied
more of a ? than a reply. would the reverse pilot bits work on eva?
Forum: rodboard 13 years ago
ricky espenschied
they are also better when used on rods built for kids.
Forum: rodboard 13 years ago
ricky espenschied
I am in no way a expert on dec wraps but on the ones i have done i have found that using a lite build finish on the first coat helps with the bubble problem.
Forum: rodboard 13 years ago
ricky espenschied
On most all my panfish rods i will just use a cork tennesse handle. Light and easy to do.
Forum: rodboard 13 years ago
ricky espenschied
this may be an apples and oranges ? How does this compare to gudebrod 1 part finish?
Forum: rodboard 13 years ago
ricky espenschied
once again thanx to all. i do hope to be at high point (someday) just not this year.
Forum: rodboard 13 years ago
ricky espenschied
can anyone recomend a blank like this. 15-30lb line,heavy to xheavy med fast to fast.1/2 -2oz lure. any help would be appreciated thanx much ricky after uncrssing my eyes and help from Bob at mudhole (he found it) lamiglas xl 956 thanx ricky
Forum: rodboard 13 years ago
ricky espenschied
would someone tell me what issue of rod maker the split grip article is in. i would like to read it thanx ricky
Forum: rodboard 13 years ago
ricky espenschied
my bad sorry to cause a problem that was do to me not paying attintion. ps realy like this forum and have learned a lot from it. also i did subscribe to rod maker mag. thanx mr. kirkman.
Forum: rodboard 13 years ago
ricky espenschied
i dont want to sound like i am complaining just wondering.
Forum: rodboard 13 years ago
ricky espenschied
right url just tells me i have to be registered to view
Forum: rodboard 13 years ago
ricky espenschied
have not been able to get into photo pages for a couple days. just wondering why
Forum: rodboard 13 years ago
ricky espenschied
144. Re: rod repair
thanks for the feed back. when i did this i figured the reel end of the rod would be the place to try it. thanks again
Forum: rodboard 13 years ago
ricky espenschied
145. Re: rod repair
thanks for the feed back. when i did this i figured the reel end of the rod would be the place to try it. thanks again
Forum: rodboard 13 years ago
ricky espenschied
146. Re: rod repair
thanks for the feed back. when i did this i figured the reel end of the rod would be the place to try it. thanks again
Forum: rodboard 13 years ago
ricky espenschied
147. rod repair
this spring i tried something on a casting rod break (break was between first and second guide from reelseat) i sleaved inside then instead of sleaving outside i applied a coat of flexcoat epoxy (slow cure) then wrapped and finished. after fishing rod sevral times it is staying together and fishes well. ? has anyone else tried this or am i just lucky so far?
Forum: rodboard 13 years ago
ricky espenschied
150. Re: Magnifying lens
if you dont mind wearing a cap you you can use what is called a flip focal. it for tying flys on small tippets
Forum: rodboard |