SPONSORS
2024 ICRBE EXPO |
Results 61 - 90 of 168
9 years ago
ricky espenschied
I was told by Abu Garcia that they make there own guides. So I agree with Joe. That many sic, Ti guides on a rod in that price range ??
Ricky
Forum: rodboard 9 years ago
ricky espenschied
If you go to Batsons web site there is a step by step in the tips and trick section
Ricky
Forum: rodboard 9 years ago
ricky espenschied
Jim like the equal butt diameter feature. How much of the butt section is equal diameter. Is it based on a % of blank length or just x length.
Thanks Ricky
Forum: rodboard 9 years ago
ricky espenschied
Lessons learned are a good thing.I learn a little on every build or repair
RICKY
Forum: rodboard 9 years ago
ricky espenschied
If it is not to noticeable and not big gap between the cork and blank you can leave off the check and just do a wrap in front of the foregrip.If there is a gap the finish should draw in to it. Or you can cut off the foregrip and start over.
Ricky
Forum: rodboard 9 years ago
ricky espenschied
For a gl3 replacement my first thought would be either a rx7 batson or a mhx from mudhole
Ricky
Forum: rodboard 9 years ago
ricky espenschied
Agree with Roger a1power popping blank would work well for you.
Ricky
Forum: rodboard 9 years ago
ricky espenschied
71. Re: blush
Just a shot in dark but could it be your brush or what you are cleaning them with?
Ricky
Forum: rodboard 9 years ago
ricky espenschied
Maybe one of batsons spg fiberglass blanks or a rx6 sb blank. The trouble with looking at ultralite will be with lifting power.imo
Ricky
Forum: rodboard 9 years ago
ricky espenschied
We all make mistakes. Hopefully we learn from them. Ricky
Forum: rodboard 9 years ago
ricky espenschied
The pigments are mixed in the finish. The best way I can explain it is to look at mudholes video about it.Also doing a complete blank this way would ruin it. Imo
Ricky
Forum: rodboard 9 years ago
ricky espenschied
From reading your post did you mix the paint in rod finish ?
Ricky
Forum: rodboard 9 years ago
ricky espenschied
Mudhole also has there MHX panfish&crappie blanks.
Ricky
Forum: rodboard 9 years ago
ricky espenschied
A 50/50 mix of acetone and transmission fluid in a spray bottle has worked for me. ( but I have not used on a rod)
Ricky
Forum: rodboard 10 years ago
ricky espenschied
Yes they were and thank you again. Sent you mail today let me know if it does not show.
Ricky
Forum: rodboard 10 years ago
ricky espenschied
Thanks Mr. Kirkman I will try to contact Mr. Danku
Mr wilson I need to stay as close to original as possible
Mr. Boettcher my eyes are tired from web surfing
If it matters I posted the wrong measerments.The broken guide is around 21mm tall and 14mm od. I will keep looking. Also thanks to everyone
that looked at the pictures.
Forum: rodboard 10 years ago
ricky espenschied
I have a Garcia 2110t rod to repair that is in need of a white agate guide. It is approx, 18 mm tall with an od of approx. 10,5.
I loaded a couple of pictures in the misc.catagory.
Any help will be greatly appreciated
Thanks Ricky
Forum: rodboard 10 years ago
ricky espenschied
85. Re: Cabelas?
I wonder how many builders got there first building supplies from Cabelas?
Ricky
Forum: rodboard 10 years ago
ricky espenschied
Not the cold. if its a frost free fridge very little moisture in it
ricky
Forum: rodboard 10 years ago
ricky espenschied
x2 on thread. Also just a regular pencil erasser will work
Ricky
Forum: rodboard 10 years ago
ricky espenschied
The Batson grips fit well. I think anglers workshop,swampland and get bit carry them. Give one of them a call and check to make sure
ricky
Forum: rodboard 11 years ago
ricky espenschied
there is a turtorial on single turn trim bands in the rod builders library
Forum: rodboard 11 years ago
ricky espenschied
Mick,Russell and Terry gave god advice. Only other thing is every time I have moved away from black and white under wrap I have not gotten good results. You might try black and yellow with the purple.The bottom wrap does need to loose enough to brunish in differnt direction .
Also it seems the more finish coats on the bottom wrap the better the effect.
Ricky
Forum: rodboard |