SPONSORS
2024 ICRBE EXPO |
Results 121 - 150 of 179
13 years ago
Roger Rierson
121. Re: flea market
Enjoyed the gathering yesterday. Tom demonstrated how to apply finish to guide wrap, talked about rod breakage. I picked up a tip from Steve Gardner on wrapping micro's. Also met and talked to some rod builders. Picked up a Castaway 964 XP3 blank.
Forum: rodboard 13 years ago
Roger Rierson
122. Top for Ultra Lite
In process of gathering everything to build a ultra lite(6 1/2 ft). I want to try my hand at using #4 micro's for the running guides. I have minima 4 and 6's guides now. I have the xp4xt #6 top. My understanding is #6 is the smallest top that matches with the minima guides. If i use the #4's will the #6 top be to big or is there a smaller top that matches well with the mimina guides? Also does
Forum: rodboard 13 years ago
Roger Rierson
123. Re: Tiger wrap help
My first did the same as you, so i tried a little more tension and it turned out good.
Forum: rodboard 14 years ago
Roger Rierson
126. M&M's
I have read with great interest vol 1 & 2 of Micro Manic. I was thinking there was a vol 3 & 4. If so could someone steer me in the right direction of find this tread, I used the search but only found the mentioned vols. I typed M&M's, all words and all dates but nothing. Thanks for help in the right direction.
Forum: rodboard 14 years ago
Roger Rierson
Robert,
I bought a FS764 from the trash can bin last month at the expo. The list attached to the can had it listed as a flippin stick. I think the lure weight range was 3/8 - 1 1/2. Not 100% sure.
Forum: rodboard 14 years ago
Roger Rierson
129. Guide xm4xg
Picked these guides up at the show but forgot to get the tip top. Anyone know who makes these guides.
Thanks,
Roger
Forum: rodboard 14 years ago
Roger Rierson
130. Re: Reception
Per/Tom. One note - we usually have a long, long line of foiks waiting to get into the Reception. This is because so many arrive a bit early. We won't open the doors until 6:30 and we don't start giving away the door prizes until about 7:15. So do yourself a favor and be fashionably late. There will be plenty of food for everybody and arriving a little after 6:30 will save you a good bit of time
Forum: rodboard 14 years ago
Roger Rierson
This is the 3rd or 4th friday we've had snow or ice here in Greensboro-High Point. Hope friday 2-19-2010 will be sunny and warm.
Roger
Greensboro, NC
Forum: rodboard 14 years ago
Roger Rierson
Has anyone received the 12-6 issue or is it to early?
Roger,
Greensboro, NC
Forum: rodboard 14 years ago
Roger Rierson
136. Optivisor
Looking at optivisors to buy. Unsure which magnifying lens would be good. What lens strength do most use. Also what is a good light to use at your work bench or wrapping station?
Thanks,
Greensboro, NC
Forum: rodboard 14 years ago
Roger Rierson
138. SBV-804 Blank
Picked this blank up at the expo in garbage can bin. Anyone might have any info about this blank. Maybe manufacture & lure weight range?
Thanks, Roger
Greensboro, NC
Forum: rodboard 14 years ago
Roger Rierson
Thanks for all the replies. My Neighbor is filing the threaded rod as i speak. Again thank you for all the help.
Forum: rodboard 14 years ago
Roger Rierson
I have tried nylon and metal washers. The spring and washer turns then the wing nut starts turning. The rod does not turn. I will try the screw head covers. I made this for madeira thread. My other thread carriage the madeira thread spools were to long for the shorter rod on my Pac Bay Wrapper.
Forum: rodboard 14 years ago
Roger Rierson
I have made a thread carriage and having trouble keeping tension on the spool. i am using a 1/4 threaded rod with washers, nuts, spring, wing nut and tried binder clip. The problem i am having is when i start wrapping a guide everything starts turning even the wing nut. Anyone who has made a thread carriage could you give some advice to help with this problem.
Forum: rodboard 14 years ago
Roger Rierson
I notice some builders have something between the reel seat and where the fore grip butts up to the reel seat. What would this be and is it for keeping moisture out.
Thanks,
Roger
Greensboro, NC
Forum: rodboard 14 years ago
Roger Rierson
143. Re: Which is better?
Thank you for all the replies.
Roger
Forum: rodboard 14 years ago
Roger Rierson
144. Which is better?
Hardloy or Alconite guides hold up better in salt water fishing? I know Titanium is best but wondering about the the two mentioned. Also will 12lb mono pass through a #6 guide with no problem?
Thanks,
Roger
Greensboro, NC
Forum: rodboard 14 years ago
Roger Rierson
As a employee of the USPS, we thank you.
Roger
Greensboro, NC
Forum: rodboard 14 years ago
Roger Rierson
146. Split Grip
I did a search from the photo page on split grips and found some nice grips. I noticed from all the pics that the 2 rear grips varied in length, be it cork, eva or wood. My question is how do you decide what length to use, the length of the rod or the type of fishing you will be doing or by feel. I wanted to try a split grip on my next build which will be a flounder rod (7') fished around pier p
Forum: rodboard 15 years ago
Roger Rierson
Glad the expo was last weekend. This weekend in the High Point-Greensboro area, we've had rain, sleet, freezing rain this am, and 3 to 7 inches of snow to come later today and throughout the night. Tom picked the perfect weekend for the expo. Hope next year will the perfect weekend.
Forum: rodboard 16 years ago
Roger Rierson
148. USPS Price Alert
As a postal employee, a heads up for all the vendors that use USPS services. New prices go in effect May12. Some rates will be less. For more info go to www.usps.com/price.
Forum: rodboard 16 years ago
Roger Rierson
Thanks Scott and Harold. Yes, I have dream reamers. First time using them.
Forum: rodboard 16 years ago
Roger Rierson
How far from the butt end of the blank should a preformed cork grip fit when doing a dry fit before you epoxy to the blank? This is my first try with preformed grips. The grip is 7inches. Thanks.
Forum: rodboard |