SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 179
3 years ago
Roger Rierson
Thanks Don for the kind offer but i have already got 2 Cardinal 10's. Again thank you.
Forum: rodboard 3 years ago
Roger Rierson
Thanks John, hadn't thought about a spinning reel. That might be the way to go.
Forum: rodboard 3 years ago
Roger Rierson
I am looking for 2 reels for a build for my two youngest grandchildren. Boy is seven and girl is ten years old. They have already picked their rods and both are 6ft and moderate fast action. I have been going back to the 1950's when i was a kid and my push button zebco, but having done a little research on zebco reels the reviews are not to good. I was thinking spin cast or a under spin reel, so
Forum: rodboard 3 years ago
Roger Rierson
6. Epoxy Finish
i have finish that i bought at the expo in 2019 that i haven't open until now. The hardener looks like a dark copper color and the resin is solid like a frozen block of ice. I did put the resin in the microwave and nuked it a few seconds until it become in a liquid form. I did get 3cc from each and put in a mixing cup and mixed for about 2 minutes. The color was a light cooper color. I poured the
Forum: rodboard 4 years ago
Roger Rierson
Rich,
Fuji came out with a tool called speed threader to use to run line through micro guides and it works good. I'am like you with seeing how to run line through those micro guides. The Rod Room has the threader, which is a vendor here on the left.
Forum: rodboard 4 years ago
Roger Rierson
With the snow that's falling here now its perfect vehicle.
Forum: rodboard 4 years ago
Roger Rierson
Have you tried Get Bit Outdoors. They carry Fish Hawk Thread. I have purchased variegated thread before.
Forum: rodboard 5 years ago
Roger Rierson
Just saw this on one of our local tv station web site.
Pancake Jamboree.
All you can eat pancakes and sausage.
Where: Benton Convention Center.
Date: Friday February 22, 2019
Cost: $8.00 Adults & $4.00 Children under thirteen.
Time: 6:30am to 8:00pm.
Includes all you can eat pancakes, sausage and one beverage.
If you are coming in Friday Feb. 22nd to the 2019 Expo you can fill up
Forum: rodboard 5 years ago
Roger Rierson
15. 2019 Expo Dates
This month Rodmaker magazine has the date for the 2019 Expo Feb.16th & 17th 2019. The Expo web site has Feb. 23rd & 24th 2019. I am assuming its the latter dates. 23rd & 24th. Is this correct.
Forum: rodboard 6 years ago
Roger Rierson
16. Re: NFC site
Had no problems yesterday. Went to their web site, then clicked on the carbonatex grips, next page come up was 9 squares with grips in each square. I wanted some of the CTRG-375 grips which was square five. I clicked on the letters highlighted in blue and when next page came up scroll down and there were all the measurements i needed. Hope this helps.
Forum: rodboard 6 years ago
Roger Rierson
17. Re: RF Elite 806
Thanks Joe, yeah I heard it’s garbage.lol. I guess I will hold for now but if I change my mind I will let you know. Thanks again for the specs.
Forum: rodboard 6 years ago
Roger Rierson
18. Re: RF Elite 806
Thanks Norman. That's what i was thinking. I know one thing it sure is light.
Forum: rodboard 6 years ago
Roger Rierson
19. RF Elite 806
Anyone know the specs for this blank. I got it at a estate sale. Was in a plastic sealed, and a sticker with RF 806 label.
Thanks
Forum: rodboard 6 years ago
Roger Rierson
20. Re: XSB802.75
This was posted some time ago. Not sure how accurate but it's what i go by to narrow my choices.
Re: Replacement for Batson ISB822.5 or XSB822.5
Posted by: Tiago Bettio (---.virtua.com.br)
Date: January 19, 2015 07:59AM
Hello Guys, my first post here.
Hope this can help. Greetings from Brazil.
New Product # Discontinued Product
ETEC68M-CB NEW
ETEC68MH-CB NEW
ETEC72M-CB NEW
Forum: rodboard 6 years ago
Roger Rierson
Thanks James & Thomas. I have a RX7 882.5 built for dropshot. I also
have the REVS68M but haven't built on it yet. i am saving that one for myself. I picked the blanks in question on close out to build for my oldest grandson. Again thanks for the reply.
Forum: rodboard 6 years ago
Roger Rierson
Which one of these 3 blanks would be a good jerk bait rod throwing weightless plastics, floating worms and swimming plastic up to a 1/4oz jig head. Will be fishing 8lb fluoro.
Rainshadow RX6 SB-782 8-14lb, 1/4-5/8 oz. fast/med
Rainshadow RX6 SB-822.5 6-14lb, 1/8-5/8oz. x-fast/med
Rainshadow RX7 ISB-822.5 6-14lb, 1/8-5/8oz x-fast/med
Forum: rodboard 6 years ago
Roger Rierson
24. Re: Smokey Tiger
Randy check out Scott Throop black and grey tiger wrap in photos. I did one similar and it turn out good
Sorry for double post.
Forum: rodboard 6 years ago
Roger Rierson
25. Re: Smokey Tiger
Randy check out Scott Throop black and grey tiger wrap in photos. I did one similar and it turn out good.
Forum: rodboard 6 years ago
Roger Rierson
27. Marriott Hotel
I am having trouble going to the Marriott hotel site to register for a room. The link posted takes me to embassy suites and the embassy suites takes me to the same. Has anyone who recently registered for a room at the Marriott having the same trouble. I don't know if this is on my end or not. I tried on my computer and laptop. Is it to early to register for a room at the Marriott?
Thanks
Forum: rodboard 6 years ago
Roger Rierson
Some might know this but since 2008 or 2009 Fed-x has handled all of USPS priority and express mail including packages except local. I retired from the USPS in 2012 and i worked Express mail including round tubes with rods inside. They were never put on a conveyer belt. The contract truck drivers handles packages in loading their trucks to take to the airport to turn over to fed-x then fed-x loa
Forum: rodboard 6 years ago
Roger Rierson
Thanks Norman & Donald. I just found out his dad gave me wrong info. Reel #1 12lb fluro with no leader and reel #2 15lb braid with 10lb mono leader. Donald thanks for the video. Looks a lot easier than FG knot. Norman, yes that fluorocarbon to fluorocarbon seemed strange to me also.
Forum: rodboard 6 years ago
Roger Rierson
Iam sitting up a NFC SM-SJ606 for a nephew that will be used mostly for dock skipping. I am using Minima 4F's for the runners and a size 6 tip. He will be using 15lb fluorocarbon as his running line and 20lb fluorocarbon for leader connected with albright knot. I hear a slight tic when i make under handed cast as if i was skipping the lure at the dock but i am using a 1/2oz practice plug. Also
Forum: rodboard |