I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2019 EXPO
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rougarou Rods
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Subject Views Posts  Started By  Last Post 
A suggestion & comment 1,260  Warren  10/19/2001 02:27PM 
Last Post by John Britt
Guide Spacing 1,214  Brian McGrath  10/19/2001 09:23AM 
Last Post by Tom Kirkman
"Generic" Loomis blanks? Seconds? Blems? 1,492  Tony Hill  10/19/2001 11:40PM 
Last Post by Tony Hill
Thread art?!? 1,752  Warren  10/19/2001 09:32PM 
Last Post by Rich Garbowski
Feather Source 2,250  12  Bob Meiser  10/29/2001 05:47PM 
Last Post by Bob Meiser
Guide spacing chart wanted. 3,036  Gunnar Joergensen  10/19/2001 09:31AM 
Last Post by Tom Kirkman
Wheels for supports 1,344  Larry  10/18/2001 07:56PM 
Last Post by Petro Chem
heavy duty roller guides 1,321  dksan  10/18/2001 07:02PM 
Last Post by Petro Chem
reel seat uplock or downlock 1,157  John Lasky  10/24/2001 01:13AM 
Last Post by Alberto
East Branch Rods 1,421  TomH  10/18/2001 11:16AM 
Last Post by John Lasky
dryer type choice 1,181  Rick W.  10/18/2001 11:38AM 
Last Post by John Lasky
Reel Seat 1,470  Larry Bennett  10/18/2001 08:11PM 
Last Post by Chuck McIntyre
G>Loomis warrenty 1,343  Mike Peppe  10/22/2001 12:23PM 
Last Post by david cooksey
30 tonnage graphite? 11,806  13  Angelo Randaci  06/18/2013 03:50PM 
Last Post by Michael McLeister
Lost email addresses 1,225  Capt Neil Faulkner  10/25/2001 09:02PM 
Last Post by capt.gary
Bent butt section 1,497  12  Russell  10/17/2001 10:31PM 
Last Post by Mike Bolt
Less than accurate description 1,417  Warren  10/16/2001 05:47PM 
Last Post by Warren
guides for long distance casting rod 3,424  Dave F.  10/17/2001 09:48AM 
Last Post by Tom Kirkman
Certified Professional Rod Builder 2,711  marcus  10/17/2001 10:33PM 
Last Post by Mike Bolt
Glue to relaminate a bamboo blank 1,385  John Lasky  10/19/2001 02:31AM 
Last Post by Davesrods
rod blanks 1,368  David Teague  10/16/2001 11:51AM 
Last Post by John Britt
Rod Drying Chucks 1,952  Scott Kolts  10/17/2001 09:19AM 
Last Post by Larry
Why are 6-7' H-XH Spinning rods so hard to get vs. Conventional? 1,558  Tony Hill  10/16/2001 10:17AM 
Last Post by Rich Garbowski
Lamiglas 2002 Prototype Blank 1,395  Warren  10/15/2001 09:34PM 
Last Post by Warren
COLOUR for light brown RODS 1,237  Alberto  10/15/2001 10:07PM 
Last Post by Alberto
Fuji Blanks ??? 1,378  Christian (from Brazil)  10/15/2001 08:35PM 
Last Post by William
Permagloss Proper usage? 1,587  John Lasky  10/15/2001 05:06PM 
Last Post by John Britt
Winding Checks? 1,470  Mark Vanderhoof  10/15/2001 08:46PM 
Last Post by Jim
L2000 vs vaithane 900 and more 1,323  John Lasky  10/15/2001 10:54AM 
Last Post by Tom Kirkman
St. Croix 1st looks like blem 1,812  Mark Schulte  10/16/2001 06:19AM 
Last Post by Jeff Stickle
rods 1,421  donnie  10/14/2001 08:57PM 
Last Post by donnie
tip deflection standard 1,535  Warren  10/14/2001 08:59PM 
Last Post by William
flex coat rod finish? 1,501  Tony  11/12/2001 04:15PM 
Last Post by Dave
Need #9 RPL+ blank or similar? 1,526  Willie Hall  10/18/2001 09:23PM 
Last Post by P.J. Petiniot
Thompson's Water Seal on cork 1,962  Jim Reinhardt  10/14/2001 08:45PM 
Last Post by Warren
Labels 1,915  10  Bill Doherty  10/15/2001 09:35AM 
Last Post by Tom Kirkman
Speaking of WINSTON 1,380  Jeff Stickle  10/15/2001 05:36AM 
Last Post by Stuart Mackenzie
Some pricing info 1,683  William  10/14/2001 08:21PM 
Last Post by William
Specials for Sunday and Monday only!! 1,277  Karen Hapka  10/13/2001 07:29PM 
Last Post by Karen Hapka
Whose feather work - 1,496  Mike B.  10/16/2001 01:26PM 
Last Post by jnail
extending handle on musky casting rod 1,812  Buzz B  10/13/2001 03:20PM 
Last Post by Dwayne Rye
Rod epoxy with rod finish 1,087  Tony  10/14/2001 08:25PM 
Last Post by William
humidity for wrapping finish 1,577  Tony  10/16/2001 01:36PM 
Last Post by jnail
Burl Cork 2,013  Eric  10/14/2001 03:11PM 
Last Post by Billy 40
preping a blank for finish 1,751  John Lasky  10/12/2001 03:40PM 
Last Post by Tom Kirkman
A Rod Builder deserves recognition for Relief Donation 888  Rich Garbowski  10/12/2001 11:13AM 
Last Post by Tom Kirkman
thread color 1,296  11  Dan E  10/16/2001 01:43PM 
Last Post by jnail
Laser Alignment 2,429  11  Jim  10/12/2001 01:28PM 
Last Post by Tom Kirkman
Drying motor speed 1,260  Mike Canavan  11/14/2001 11:14PM 
Last Post by Sanford Hochman
Jann's Netcraft good business 1,554  Mark Schulte  10/25/2001 10:55PM 
Last Post by Izzie
Options:
Webmaster