I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2019 EXPO
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rougarou Rods
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Subject Views Posts  Started By  Last Post 
Upgrading Clemens/Renzetti lathe 1,540  Eric  08/26/2001 07:52PM 
Last Post by William
Rainshadow Blanks 6,198  11  Eric  09/03/2001 12:30PM 
Last Post by Dick Thurston
Robert's Wrap 1,922  Tony  08/27/2001 01:39PM 
Last Post by Jim Johns
16" foregrips 1,758  Tony  08/25/2001 03:07PM 
Last Post by Petro Chem
Rod Oscillating 2,239  Billy 40  08/26/2001 10:45PM 
Last Post by Billy 40
Why Not Silk Thread? 1,948  Paul O  08/27/2001 01:22AM 
Last Post by Kerry
Comments on Exposed Blank Reel Seats? 2,166  11  Stephen Ashcraft  08/28/2001 07:48AM 
Last Post by Brad Tharp
contact needed 1,474  Mike Thompson  08/25/2001 08:09PM 
Last Post by Pete
SF guide choices for 12wt 1,556  Vladan  08/24/2001 04:53PM 
Last Post by Barry
Rod Drying Motors 2,691  MR  08/27/2001 12:09AM 
Last Post by Steve
Refinishing entire Blank 1,605  elrod  09/01/2001 10:37AM 
Last Post by Dick Thurston
Perma Gloss 1,512  Kerry  08/24/2001 03:36PM 
Last Post by Kerry
st croix e-mail address? 1,509  jnail  08/24/2001 09:37AM 
Last Post by Rich Garbowski
GRT180 guide spacing 1,658  fred schoenduby  08/24/2001 10:02AM 
Last Post by Petro Chem
Underwraps and the New Concept Guide system 1,754  Dwayne Rye  08/24/2001 08:32AM 
Last Post by Dwayne Rye
New St Croix Blanks 1,835  Gerald McCasland  08/24/2001 09:48AM 
Last Post by Rich Garbowski
Maniform grips 1,624  Peter  08/24/2001 01:48AM 
Last Post by Peter
Starting the spiral wrap thread again 2,165  14  Mike bolt  08/25/2001 12:12AM 
Last Post by Warren
Wanted:Used Pac Bay wrapper 1,522  Joel  08/23/2001 12:15AM 
Last Post by Jim
Noodle Rods...any suggestions 1,860  Rich Garbowski  08/29/2001 10:55PM 
Last Post by Seth
Smoky Mtn Flyrod 2,096  LonnieD  08/27/2001 07:28PM 
Last Post by jnail
Turning a Uplock into Downlock 1,616  John Kreeger  08/22/2001 12:53PM 
Last Post by Wes
Reel seat filler/spey grip 2,011  gary  08/22/2001 06:55AM 
Last Post by gary
Halibut rod 1,899  Robert Balcombe (REELMAN)  08/22/2001 09:55AM 
Last Post by Al G.
Micro Lathe 1,538  Davesrods  08/28/2001 05:49PM 
Last Post by mod2
Fish wrap 1,586  Steve  08/24/2001 11:10PM 
Last Post by Steve
Static Deflection Tests? 1,651  Warren  08/22/2001 08:25AM 
Last Post by William
musky blank 1,581  jnail  08/22/2001 06:31PM 
Last Post by Rich Garbowski
HELP! Opinions on 9'9wt saltwater blanks for stripe bass and blues 1,624  Chris  08/28/2001 07:55PM 
Last Post by Todd
Stabond Adhesive 2,571  Greg  08/22/2001 09:18AM 
Last Post by Greg
maeking pens 1,703  Dan E  08/22/2001 05:43PM 
Last Post by Kerry
Handle Problem 1,446  Eric Ege  08/21/2001 12:35PM 
Last Post by Chuck McIntyre
Calstar's New Warranty 1,987  Greg  08/20/2001 09:25PM 
Last Post by William
fenwick blanks 1,903  capt.j.keg  08/21/2001 10:59AM 
Last Post by Bob Batson
Still fence sitting/thumb suckin 1,631  Warren  08/21/2001 01:27PM 
Last Post by cam
Packing Threads in Decorative Wraps 2,300  Chuck E.  08/21/2001 11:16PM 
Last Post by Chuck E.
H & H fly blanks 1,531  Steve Madison  08/20/2001 10:10AM 
Last Post by Raymond
Rod Sugestion 1,642  Paul O  08/20/2001 02:17PM 
Last Post by Paul O
Seat size 1,739  Larry  08/19/2001 12:40PM 
Last Post by Mike Bolt
Is spiral wrap king?    Pages: 1 2 3,880  28  Pete  08/23/2001 02:29PM 
Last Post by Coach
RM article, ferrule building 1,533  Buzz B  08/18/2001 06:10PM 
Last Post by Willaim
shoe size/ surf rods 1,631  steve  08/20/2001 08:28AM 
Last Post by Tom Kirkman
Metallic threads 1,631  Dan Bryant  08/20/2001 02:17AM 
Last Post by Karen Balcombe
Magi Braid "HELP" 1,575  Stuart Mackenzie  08/18/2001 09:41AM 
Last Post by Chuck McIntyre
Alps MD 1000 printer price? 1,565  Steve  08/18/2001 10:48AM 
Last Post by Harv
LS Supreme 1,821  Dwayne Rye  08/17/2001 08:36PM 
Last Post by Dwayne Rye
Pacific Bay Rod Lathes? 3,817  10  Mike  08/21/2001 08:56AM 
Last Post by elrod
How do you remove reel seats? 1,690  Chris D  08/20/2001 02:25AM 
Last Post by Karen Balcombe
Kudos To Bingham Ent. -- Thanks!! 1,768  Mike  08/20/2001 10:27AM 
Last Post by nick
Classic Rod Winder 3,850  Russ Gooding  08/17/2001 11:08AM 
Last Post by Bill OConnor
Options:
Webmaster