I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Matching a pre-formed grip inlett to seat ???
Posted by: Darrin Dembowski (---.cpe.net.cable.roger)
Date: May 02, 2005 12:00AM

Hi, I'm trying to purchase a Struble pre-formed cork grip and match the inlett portion to 2 seats not made by Struble.One is a Bellinger ULSB DLX NS (with a hood O.D of 0.722) and the other is a Venneri cap n ring (with a hood O.D of 0.71). I'm trying to match these up with a coressponding Struble seat to order the proper inlet for the cork grip.
Thanks

Options: ReplyQuote
Re: Matching a pre-formed grip inlett to seat ???
Posted by: Spencer Phipps (---.hsd1.wa.comcast.net)
Date: May 03, 2005 08:08AM

Get with Angler's Workshop, looks like they carry everything above but the Venneri. They inlet grips for me all the time. The Venneri cap and ring seats I've used are downlocking and don't need an inlet, they have a beauty ring at the top that butts up to the un-inletted cork.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster