SPONSORS
2024 ICRBE EXPO |
Results 241 - 270 of 279
17 years ago
Tony Politi
I am building a surf rod and I am Using Quick Grip over cork tape for the butt grip and Amtaks Rubber Shrink tube with the X-flocked sections over cork tape for the fore grip. I know the diameter of the grips will shrink when heated, my concern is will I lose any length when I shrink them? Do I cut them exactly to size or do I need to leave them a little long? Or should I just cut them long a
Forum: rodboard 17 years ago
Tony Politi
Marty, did you do trim bands on both sides of the single foot? Or just the bottom?
Thanks for the replies guys, still trrying to decide what I want to do.
Forum: rodboard 17 years ago
Tony Politi
Hi all, got a quick question for you. I'm doing another surf rod and have decided to start off with double foot guides (BMNAG) and finish off with single foot guided(BYAG). I normally underwrap my double foot guides, do I underwrap the single foot, or should I just single wrap and add trrim bands to keep the same color scheme? I realize I can do whatever I want, I was just curious if single f
Forum: rodboard 17 years ago
Tony Politi
245. Re: Volume 9 #3
Any preview on what we can expect? Or should we just wait and be surprised? LOL
Tony
Forum: rodboard 18 years ago
Tony Politi
Me too, thanks Tom I got mine today. Thanks again for resending it.
Tony
Forum: rodboard 18 years ago
Tony Politi
Billy, save a book for me. I'm going on vacation next Tuesday for two weeks, but I'll get in touch with you when I get back.
Tony
Forum: rodboard 18 years ago
Tony Politi
Ken, based on the last time, you probably got another couple of weeks, LOL. It does hurt when everyone is talking about how good an issue it is and you don't get yours for a couple of weeks. I was really bummed out the last time it happened to me.
Tony
Forum: rodboard 18 years ago
Tony Politi
Billy, maybe the oil spill has something to do with it, LOL. Maybe we need to build you a clean room.
Forum: rodboard 18 years ago
Tony Politi
Hi guys I'm looking for Pac Bay LCTCG Guides, any Idea who caries them. I can't seem to get on Mudholes site tonight, I think its down.
Thanks
Tony
Forum: rodboard 18 years ago
Tony Politi
Thanks for the responses, James, the rod is a second hand rod that has a broken guide, otherwise it's in good shape. I've had the rod for 2-3 years and never touched it, it'll be a second backup. I'm not concerned about the warranty just want to get the rod usable.
Tony
Forum: rodboard 18 years ago
Tony Politi
Hey all, I've got a Winston BLS 9' #8 4 1/4 oz rod with a broken guide. I asked Winston what guides that they use and was told send it to them along with $30 and they woud replace it. I want to do it myself, which is why I asked what guides they used so I can match it to what is already there. I need to replace the 2nd double foot guide. It looks like a chrome SIC guide but there are no Fiji
Forum: rodboard 18 years ago
Tony Politi
Andy, I gave the plug 2 coats of Threadmaster and it came out great. It has a clear, smooth finish and I can't wait for the first set of teeth marks in it. I'll post a pic and a link tonight.
Tony
PS - Plugmaster might not be a bad idea, LOL a little cross marketing.
A couple of pics
Forum: rodboard 18 years ago
Tony Politi
I normally screw the reel seat away from the bottom of the threads (tighten the seat) and then wrap the threads with teflon tape (for pipe). It's not adhesive and it comes off easily.
Tony
Forum: rodboard 18 years ago
Tony Politi
Mike, will there be any way for those of us who cannot make it to Charlotte to get in on the Raffle for the Global Rod?
Tony
Forum: rodboard 18 years ago
Tony Politi
259. Re: Diamond Wrap
I saw Mike Joyce use a metric ruler last year that worked well. Mudhole also sells a buttwrap alignment tool.
Good Luck
Tony
Forum: rodboard 18 years ago
Tony Politi
Billy, I have both but I was impressed over the clarity of the Threadmaster, and it seems prety durable.
Plus, since it's my first plug why not experiment?
Tony
Forum: rodboard 18 years ago
Tony Politi
Andy, got a question for you. I turned my first plug today, a needlefish. It is completed except for epoxy. I was gonna use 30 minute epoxy, but was considering using some Threadmaster thatI got from Billy at the LI NERBS gathering. Do you think Threadmaster will be OK for this, or should I stick to 30 min???
Thanks
Tony
Forum: rodboard 18 years ago
Tony Politi
Billy, not too sure yet. I have some BMNAG guides that I will tape on and test cast. Probably a 40 butt guide and work from there.
Tony
Forum: rodboard 18 years ago
Tony Politi
Billy, i didn't think of it until afterwards. I was planning on using the BMNAG's, but I saw the CMNAG's and thought that they looked great. I normally rinse every outing, LOL
Tony
Forum: rodboard 18 years ago
Tony Politi
Hey Mike, what's happening? Thanks for the info. The LI NERB gathering was fantastic, lots of laughs. I hope to be able to make one of the other gathering, Maybe Mass again???? We'll see how the timing works out.
Tony
Forum: rodboard 18 years ago
Tony Politi
265. Fuji CMNAG Guides
Hey guys, just wondering if there has been any feedback on the fuji CNMAG guides. I am planning of building another surf rod and was looking at these guides, instead of the black BMNAG. My concern is the durability of the chrome finish. Any input???
Thanks
Tony
Forum: rodboard 18 years ago
Tony Politi
267. Re: New Website
Tom and Dr. Hanneman, thanks for the generous act. I am fortunate to be a subscriber to Rodmaker and have the articles already, but to put it out there for the general publics use is huge.
I just wanted to say thanks to the both of you.
Tony
Forum: rodboard 18 years ago
Tony Politi
How will quick grip work on top of cork tape? I have a couple of rods that have had heavy use and the cork tape is starting to wear. I know I can redo the cork tape, but I was thinking that this might be a little more resilient. Any opinions???
Thanks
Tony
Forum: rodboard 18 years ago
Tony Politi
Well, I haven't gotten it yet, but I guess there's hope.
Thanks
Tony
Forum: rodboard 18 years ago
Tony Politi
Hey all, can anyone tell me the volume and issue number of the latest issue of Rodmaker? I suspect that I should have gotten one recently and before I go spouting off I figured that I would check to make sure I am correct.
Thanks
Tony
Forum: rodboard |