SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 437
15 years ago
allen forsdyke
Bit dirty needs a little sand up to take the black smudges off
Forum: rodboard 15 years ago
allen forsdyke
Sounds stupid but you get a much truer shape by filing this way. just keep turning blank every so often to keep "feathering" edges
Forum: rodboard 15 years ago
allen forsdyke
3. Fluro
Copy of sean endres rod ( cover of billys book) done in GLOINTHEDARK thread slightly thinner than maderia 40wt)
Forum: rodboard 15 years ago
allen forsdyke
A copy of sean endres spaced star blank is 15mm diameter 12lb boat rod
Forum: rodboard 17 years ago
allen forsdyke
a good freind (a lapidary) cut and gave me these stones (£130,000 worth) to incorperate into a cork grip
a rod worth over a hundred grand sweet eh
Forum: rodboard 18 years ago
allen forsdyke
7. shaded bands
just messing round with trim bands and got carried away
Forum: rodboard 18 years ago
allen forsdyke
first photo I have posted All comments welcomed (good or bad)
Forum: rodboard 14 years ago
allen forsdyke
9. CA glue
Sorry for asking such a dumb question but I dont wanna get caught in the old "language trip me up barrier" again
When you talk about CA glue are you talking about Cyanoacrylate (just a generic name for cyanoacrylate based fast-acting glues such as loctite super glue)
Basically the stuff that sticks anything to anything and really only sets when pressure is applied to remove the air
O
Forum: rodboard 14 years ago
allen forsdyke
Could it be that your finish is actually the contaminate?
Has that got some sort of silicon into it somewhere?
Are you using surgical syringes to measure you finish out ?
Have you tried just mixing some and pouring a small amount out onto a new piece of tin foil (like that it will definatly prove finish/ mixing is the problem if it still fish eyes if not then its after mixing and eiter in th
Forum: rodboard 14 years ago
allen forsdyke
I got a much better way of cleaning it...
What you do is take the remote cotrol for the telly AND OR the controllers for the kids WII system
Bury them on your desk sit back and wait
Within an HOUR its spotless as wifey comes in looking for remote gets told its on you desk somewhere hey presto she cleans it. kids moan about no hand controls tell em its "on the desk" they help clean u
Forum: rodboard 15 years ago
allen forsdyke
ER GUYS
Please reread the original post ( sorry tom but I don`t think youre advice would be suitable)
QUOTE
I am handicapped to begin with, since I suffer from color blindness.
Bobby run it by with the wife or a friend bud
You have my sympathy I suffered it for a few weeks when i decided to give myself arc eye couldn`t distinguish blue and yellow for the life of me
Forum: rodboard 15 years ago
allen forsdyke
Take a look at swampland tackle
Basically its a self adhesive film that is Holographic (prismatic) sillver (like the bottom of a cd) that you run though an injet printer anything you leave WHITE shows through as siler anything else takes on a prismatic colour effect
take a look at
Forum: rodboard 15 years ago
allen forsdyke
240 to 320 grit seems to work the best for "final finishing" go careful through I find that these grits cut faster than 120 grit
Dont bother going up higher than 320 you just end up "glossing "the grip which is no good
Forum: rodboard 15 years ago
allen forsdyke
just bring it round mine my kids are brilliant at it
doesnt matter where I put it they manage to snap it somehow
Forum: rodboard 15 years ago
allen forsdyke
how do you mean "showing htrough" gaps or have they gone clear under finish
If there gappy then burnish better.
If your talking about the thread going opaque under the finish try using NCP thread or colour preserver
Try and post a photo of what you maen
Allen
Forum: rodboard 15 years ago
allen forsdyke
17. Re: glitter
easy if you use regular glitter just open it over the pestal and mortar any that "spills"gets used
Forum: rodboard 15 years ago
allen forsdyke
Try changing the PAPER TYPE maybe photo paper glossy photo paper pro or glossy film setting (this lays down more ink in a closer "splat setting"
Forum: rodboard 15 years ago
allen forsdyke
Normal glitter REALLY grind it up in a pestle and morter until its like DUST
Absolutly wicked finish and about a quarter the price
This is airbrushable as well
(its basically a smaller scale of the micro gitters)
Forum: rodboard 15 years ago
allen forsdyke
I would go for at least twice the diameter as a ferrule wap to prevent split out
Nothing worse than that
Allen
Forum: rodboard 15 years ago
allen forsdyke
if you going to buy the gallon bottles do yourself a favour and get the pump dispensers for them (BIG REGRET OF MINE i thought I would just decant eveery so often verry messy not advised. wish now i had got the pump dispensers now but seeing as how the bootle is so old and brittle round the top its not worth it LOL)
Forum: rodboard 15 years ago
allen forsdyke
just thin the epoxy with HEAT DO NOT THIN WITH chemicals
apart from that just clean the area and bang it on
You may want to slightly scuff the area to give it a water break surface but not essential
Forum: rodboard 15 years ago
allen forsdyke
I got bottles of epoxy dating back ten years or more and there still fine ( although the bottles are VERY sticky now lol)
Indefinate if kept away from frost
Forum: rodboard 15 years ago
allen forsdyke
LOL@ billy I meant the sensitive little nudgy touchy bites
BUT we have sorta different fish over here
Forum: rodboard 15 years ago
allen forsdyke
why because the fingersw are more sensitive than the palm by uplocking the seat will sit in the palm leaving your fingers to "feel" the rod... by downlocking you will only feel MAJOR vibrations through the extra part of the plate
At least thats what I was told years ago by a builder and it seems to be true
PLUS if uplocking if it comes loose then the reel is "pulled"into t
Forum: rodboard 15 years ago
allen forsdyke
26. Re: Rod Finish
Try one of the automotive cleaner waxes. If this works nicely strip the rod. use the wax cleaner then wash it well in denatured alcohol.
the cleaner wax ( try your nearest valet bay or detailers shop they may GIVE you a small bottle free) has a slight "cutting action" that will cut through any oxidization and light scratchest
BEWARE though when you rewrap it be SURE to use cp to ma
Forum: rodboard 15 years ago
allen forsdyke
When that sort of thing happened to me I found that a quick underwrap epoxyed then wrap over that
Then I found a "hot finish" used for model aircraft engine bays (fuel resistant etc) hard as nails but flexible too appied with a foam brush
Forum: rodboard 15 years ago
allen forsdyke
My advice Buy a load of cheap stuff closeouts etc
Build them rip them up rebuild them
Practice your techniques and stuff first
Then when you feel confident and you will by then have an understanding of what you want buy then build
Biggest thing to learn is take your time and dont rush things
Just because for instance epoxy says "dry in five minutes" read it carefully and it actuall
Forum: rodboard 15 years ago
allen forsdyke
mmm werè back to different people and the speech barrier thing again.
Over here in the UK so called "micro guides" as have already been pointed out are used predominently on freshwater match rods ( used for fish wieghing very light and sizewise about a thumb long) We dont tend to use them on surf rods as there seems to be a hardcore element of fishermen over here that hate change a
Forum: rodboard 15 years ago
allen forsdyke
30. Re: Taper offset
yes tom I have tried it It gives a even LOOKING spacing but the maths just doesn`t add up to close a pattern up where it would need say 48 threads to close at the butt it only needs like 32 at the tip so to close it doesn`t seem to want to go
Forum: rodboard |