Jason, you pretty much answered your own question. What size reel is your customer planning on using on this rod? Regards, Todd
Forum: rodboard

do you have the drive belt threaded around all three pullys? Todd
Forum: rodboard

I would also recommend the DS822-MHX this is a great all around model. Todd
Forum: rodboard

This is one of the biggest problems in our classes. We get students that watch some videos prior to attending and think they have to work the Epoxy instead of letting it work for them. Largest problem hands down is applying finish. Todd
Forum: rodboard

Bob, if this is an open water rod then you should be considering the Specifically designed Crank Bait models by MHX. If you are looking at ripping them through grass down here in Florida you should probably be considering an MB843-MHX. Regards, Todd
Forum: rodboard

Jon, Either of these two models will work well for the application you have listed. P904-MHX SJ902-MHX Regards, Todd
Forum: rodboard

Nate, I have supplied tournament anglers with blanks and rods for this very application and Doug's recommendation is hands down your best option. Regards, Todd
Forum: rodboard

Craig, was Lamiglas able to locate a new section for you? If not there is a pretty good chance that I have one. Let me know and I'll check at home. Regards, Todd
Forum: rodboard

Spencer is correct, get the FSG-387 grip and it will work fine with the Aero-17 Todd
Forum: rodboard

Cameron, we developed the CB968-mhx specifically for that application. Regards, Todd
Forum: rodboard

Kerry, it is the stands not being perpendicular to the chuck. I have this issue sometimes when I move a support and don't pay a lot of attention to how it is sitting when I tighten it back down. change the angle and it will push the rod back into the chuck. Todd
Forum: rodboard

Cameron, I would also 2nd the recommendation that Tanner made in the MB844-MHX or MB874-MHX. Todd
Forum: rodboard

Mark, MHX has several models which excel at these applications. Take a look at the DS822-MHX which is available in the classic slate color or the brilliant white. There is also the HM-DS822-MHX and the brand new XF (extra fast models) which I personally believe might be the best blank on the market for walleye jigging. regards, Todd
Forum: rodboard

Mike, the SW-76ML-MHX would be an excellent choice in fact there are 4 models in the MHX saltwater lineup that we recommend for KingFish. It all depends upon your preferred length and line. Regards, Todd
Forum: rodboard

Joe, MHX has crank bait models available in Graphite, Composite & fiberglass. All with very specific applications listed. There is a model for virtually any cranking application. If you have any questions about specific applications please feel free to contact us here at Mud Hole. Regards, Todd
Forum: rodboard

Marty, your email is hidden. Regards, Todd
Forum: rodboard

Bob is correct. Being as the ProKote Hi build has an accelerated cure rate it is going to yellow faster. I still find that the regular ProKote yellows less than any other 2 part 1-1 epoxy finish. Todd
Forum: rodboard

Mark, you can order the Mud Hole catalog here. regards, Todd
Forum: rodboard

Pat, what is the issue you have with these products? Regards, Todd
Forum: rodboard

Tim, this isn't an epoxy problem. You have contamination on the surface where you applied it. Todd
Forum: rodboard

David, the MB842-MHX will build an excellent top water rod especially for the larger spooks and Pop-R's like you referenced. Regards, Todd
Forum: rodboard

Mark, if you check out this link on our site you will see that we have had specific arbors made for mounting your composite tubing. Regards, Todd
Forum: rodboard

Cameron, being as you stated you were specifically looking at MHX models I would like to give you my $0.02. We have a couple of models which will work for this application and these are my 2 favorites for trout and red fish. the first being the "SJ842-MHX" and the 2nd being the "DS822-Blend". While these are only my favorites they have performed well for me for 5
Forum: rodboard

Cameron, being as you stated you were specifically looking at MHX models I would like to give you my $0.02. We have a couple of models which will work for this application and these are my 2 favorites for trout and red fish. the first being the "SJ842-MHX" and the 2nd being the "DS822-Blend". While these are only my favorites they have performed well for me for 5
Forum: rodboard

David, Lamiglas makes a 7’9” designed specifically for down rigger Kokanee fishing. We have the S871-2-MHX which we promote as a Trout/Kokanee trolling rod which would work very well. Personally if I were building a down rigger for Kokanee or Trout I’d move the butt guide a bit closer to the reel because these blanks are very parabolic and loaded into a “U” shape will easily put the l
Forum: rodboard

My recommendation would not be in the HM range due to the boat flipping, I'd look at the FP885-MHX Regards, Todd
Forum: rodboard

David, the L843-MHX has a stiffer tip than the SJ843 and Bob Tanner is correct that the MB843-MHX would be stiffer but for a trout rod I would not recommend the MB843-MHX, stick with the L843-MHX or SJ843-MHX. Regards Todd
Forum: rodboard

Jacob, look at the SJ9000-2-MHX, if you want the 7'6" 2pc. or the HS9600-2-MHX for an 8' model. regards, Todd
Forum: rodboard

Jacob, I was the blank designer at Lamiglas for 20 years and know that blank very well. Not only from manufacturing it but from much time spent using it. In my opinion the closest match to this blank would be the HS9000-2-MHX. Regards, Todd
Forum: rodboard

Ken, the base measures 5 1/2" X 11" and the centers between supports is 4 13/16". We are hoping to have our first shipment of bases in from the manufacturer the first of February. David, one of the unfortunate things about printing a catalog that is good for one (1) year is that when you have a company go out of business that supplies you with product you list you have to live
Forum: rodboard