SPONSORS
2024 ICRBE EXPO |
Results 91 - 120 of 934
10 years ago
Bill Eshelman
Try the NFL Hall of Fame, they have a huge gift shop and you may find an on line catalog.
Bill
Forum: rodboard 10 years ago
Bill Eshelman
I use two coats of cp before epoxying decals. one should do it, but why take a chance?
Bill
Forum: rodboard 10 years ago
Bill Eshelman
94. Re: New Sponsor
As one of your first customers, if you treat all as well as you have treated me with outstanding shipping and follow up you will have a successfull business. I feel a little proud that I was able to help with your daughters education.
Welcome aboard and congratulations.
Bill
Forum: rodboard 10 years ago
Bill Eshelman
I received. My kit last week. It has a very short learning curve and is fun. I just finished doing a foam grip with no other finish. I applied TM lite and it should be OK after it cures. Next I am going to use it on a foam grip that has an elliptical which went bad. A great way to salvage grips.
Thanks to Jeremy for brining us this product.
Bill
Forum: rodboard 10 years ago
Bill Eshelman
I too have evry issue which was out to the public,(All but the first Two) I have never missed an issue and also had one tore up by the mail mans kids. Tom replaced it with in a couple of days.
Tom goes out of his way to get things done right and on time.
This is a magazine a true rod builder should not do with out.
Bill Eshelman
Forum: rodboard 10 years ago
Bill Eshelman
97. Re: Printer?
within the hour, I ste up a new HP5525 all in one ink jet. I prtinted my first label on it and all is well with it. That is all I can tell you. My old Lexmark did pretty well too. I told the guy at the store that I was going to use it for decals and he said not to use a laser printer.
Forum: rodboard 10 years ago
Bill Eshelman
98. Riley Rods
Thanks to Mike Pederson for fantastic service.
I called to place an an order Tuesday after hours hoping I would catch some one still in the office. No one was there and I never left a message as I was going to call 1st thing Weds. morning. Mike called me back a little later (Thanks to caller ID) , and I placed a small order. I recieved the package today, Thursday afternoon. That is less
Forum: rodboard 10 years ago
Bill Eshelman
I know, i have trouble also.
The alignment is not the problem, it`s the one corner catching just off the angle a little bit.
Forum: rodboard 10 years ago
Bill Eshelman
100. Re: Cabelas?
My first rod was a Cabela`s kit. With no mentor available and not a thought of any forums or U-tube, that was the way to start. Every possible thing you needed for the build was right there.
Bill
Forum: rodboard 10 years ago
Bill Eshelman
101. Re: 2014 Expo
I use my I-pad and forget to check it before sending. Half the time the space bar doesn'twork (see?) half the time it is the auto correct. The other half might be my fault. I
I am good at math too.
That's my story,. Period.
Bill
Forum: rodboard 10 years ago
Bill Eshelman
102. Re: 2014 Expo
I missed. Last. Year BUT, I. Will. Be. There next. Year.
Thanks,
Bill
Forum: rodboard 10 years ago
Bill Eshelman
When you open a new bottle close it back up and simply turn the bottle upside down. This will make a great seal and will not let moisture or air in. Mine has been opened about 18 months and still good.
Forum: rodboard 10 years ago
Bill Eshelman
I have three dryers which all turn at different RPM`s. Some say 6 rpm is better others say to use 18 rpm. For the life of me I cannot see a difference. I get the same results.
Bill
Forum: rodboard 10 years ago
Bill Eshelman
Think about making the bench high enough to build standing up. Keep the chair out of the way and it should work fine.
Bill
Forum: rodboard 10 years ago
Bill Eshelman
A few years ago someone made a post asking us to tell what unusual applications we have used Rod bond paste. (I think it was Billy) I know with the responses given I can`t see how anything could be better about it.
Forum: rodboard 10 years ago
Bill Eshelman
How We Do It.............Video from Flex Coat
Rod-Building Guide.........By: Tom Kirkman
Bill
Forum: rodboard 11 years ago
Bill Eshelman
109. Re: Yoga Blocks
I have heard Yoga blocks mentioned here before. What the heck are they? Some sort of foam ? Where do you get them.
Bill
Forum: rodboard 11 years ago
Bill Eshelman
I have painted only a half dozen or so blanks. My best results came from the paint which is used on car bumpers. I t flexes with out chipping. It does require an adhesion promoter and a clear coat on top so several coats will be applied. Krypton for plastics is good also but not my preference.
Do a search on top of this page. Be sure to check"All Dates" and hit "Search"
Forum: rodboard 11 years ago
Bill Eshelman
Roman, since glitter is sold by rod building supply houses Ibelieveit to ea question of a rod building topic.
Bill
Forum: rodboard 11 years ago
Bill Eshelman
Go to the search button and type in ``Tinting Permagloss" Then go to the bottom of the page and click on ``All dates'' then hit search. Lots of info to answer these questions.
Bill
Forum: rodboard 11 years ago
Bill Eshelman
114. Re: Ubersense
Unless I'm missing something all I am able to open are offers for me to buy other videos. Am I looking at the wrong app?
Bill
Forum: rodboard 11 years ago
Bill Eshelman
115. Re: Ubersense
Unless I'm missing something all I am able to open are offers for me to buy other videos. Am I looking at the wrong app?
Bill
Forum: rodboard 11 years ago
Bill Eshelman
116. Re: Good Cork
This the first time Roger was speechless. Lol. Just kidding Roger, I couldn't. Resist.
Bill
Forum: rodboard 11 years ago
Bill Eshelman
Jeremy,
It sounds like your first one was a success. I`m glad it went well.
The sponsors a fantastic aren`t they?
Bill
Forum: rodboard 11 years ago
Bill Eshelman
I hold tension on mettalic with my finger and thumb. Make sure you have clean hands. At least a finger and thumb.
Bill
Forum: rodboard 11 years ago
Bill Eshelman
For your 1st build, I would not use micro guides. Only because they are hard to handle, especially for a new builder.
Bill
Forum: rodboard 11 years ago
Bill Eshelman
What a great expierence that must have been for you, to have all of that liesure time with those two
Bill
Forum: rodboard |