I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

2014 Expo
Posted by: Tom Kirkman (Moderator)
Date: May 28, 2013 03:18PM

The 2014 International Custom Rod Building Exposition will be held on February 22nd and 23rd, 2014, in Winston-Salem, NC at the MC Benton Convention Center. There have been some behind the scene changes but these will not be apparent to either vendors or attendees.

Please note that the 2014 RodMaker Reception will be held on Saturday evening, the 22nd.

Special hotel rates have been negotiated but they are not yet accepting reservations at those rates. The Expo website will be updated to reflect all aspects of the 2014 event around mid-June.

...............



Edited 1 time(s). Last edit at 05/29/2013 07:02AM by Tom Kirkman.

Options: ReplyQuote
Re: 2014 Expo
Posted by: Lou Auret (204.16.161.---)
Date: May 28, 2013 03:50PM

Great news, with the change of venue my wife actually looks forward to going now.

Options: ReplyQuote
Re: 2014 Expo
Posted by: Don Morse (---.dhcp.aldl.mi.charter.com)
Date: May 28, 2013 04:31PM

I am hoping to make it again...what a great show and a great time.

______________________________________
Super Tight Lines......Don

Options: ReplyQuote
Re: 2014 Expo
Posted by: Bill Eshelman (---.lightspeed.bcvloh.sbcglobal.net)
Date: May 28, 2013 05:08PM

I missed. Last. Year BUT, I. Will. Be. There next. Year.

Thanks,

Bill

Ohio Rod Builders

Canton, Ohio

Options: ReplyQuote
Re: 2014 Expo
Posted by: Don Morse (---.dhcp.aldl.mi.charter.com)
Date: May 28, 2013 05:12PM

That's. a .lot of .periods .Bill.

______________________________________
Super Tight Lines......Don

Options: ReplyQuote
Re: 2014 Expo
Posted by: Bill Eshelman (---.lightspeed.bcvloh.sbcglobal.net)
Date: May 28, 2013 07:17PM

I use my I-pad and forget to check it before sending. Half the time the space bar doesn'twork (see?) half the time it is the auto correct. The other half might be my fault. I

I am good at math too.

That's my story,. Period.

Bill

Ohio Rod Builders

Canton, Ohio

Options: ReplyQuote
Re: 2014 Expo
Posted by: curtis drumm (---.hsd1.md.comcast.net)
Date: May 28, 2013 08:45PM

Great show i'll be there again.

Options: ReplyQuote
Re: 2014 Expo
Posted by: Jim Rippe (---.lightspeed.cicril.sbcglobal.net)
Date: May 28, 2013 10:55PM

Tom, the reception would be on the 22nd which is Saturday, right? Not the 23rd which would be Sunday.

Options: ReplyQuote
Re: 2014 Expo
Posted by: Tom Kirkman (Moderator)
Date: May 29, 2013 07:01AM

You're correct. It would be the 22nd.

............

Options: ReplyQuote
Re: 2014 Expo
Posted by: corky fleming (---.hsd1.ga.comcast.net)
Date: May 29, 2013 08:47AM

Looking forward to attending. I look forward to this event each year starting on Sunday morning before I leave the current years event. THANKS Tom for a great and wonderful week end.

Corky
Corky's Custom Rods
Savannah, Georgia

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster