I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rougarou Rods
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast


Pages: 12Next
Current Page: 1 of 2
Results 1 - 30 of 34
2 months ago
marnie fernandez
Dennis Danku Wrote: ------------------------------------------------------- > I have one FPS-28 and three H.A.P.S.-26. I sent you an email
Forum: rodboard
2 months ago
marnie fernandez
Anyone have old stock Fuji FPS size 26 or 28 reel seats
Forum: rodboard
8 months ago
marnie fernandez
Brian Babcock Wrote: ------------------------------------------------------- > I can help you with size 20's. PM me. I don’t know how to direct message. Haven’t done that on this site. Can you email me marnie.fernandez@yahoo.com Thank you!
Forum: rodboard
8 months ago
marnie fernandez
Can anyone help me find old stock of Fuji BNLG guides size 30, 25, and 20. This guides are discontinued but I really like these guides for the type of fishing I do.
Forum: rodboard
8 months ago
marnie fernandez
Does the App get the spacing for a 4 axis wrap
Forum: rodboard
9 months ago
marnie fernandez
Any rodbuilder or tackle shop that has old stock of Fuji FPS reel seat size 26. I would like to buy some.
Forum: rodboard
6 years ago
marnie fernandez
Sorry should have been more specific total lengthy of wrap 12 inch. Butt end 3 1/16 inch circumference tip end 3 inches.
Forum: rodboard
6 years ago
marnie fernandez
I want to do a Predator wrap how far should the spacing be between the little fishes. Also how far should the big fish be from the little fishes. Any help would be appreciated.
Forum: rodboard
6 years ago
marnie fernandez
Anyone or shop selling those already made plastic tackle box that is used for wrapping multiple threads. I tried making one but screwed it up. I rather buy one or if someone has one they can spare.
Forum: rodboard
7 years ago
marnie fernandez
Im in Las Vegas any rodbuilding classes where can I see or learn how to do decorative wraps ( spiders, fish, and the wraps in Billy's book) from start to finish.
Forum: rodboard
7 years ago
marnie fernandez
Does Madierra thread need color preserver.
Forum: rodboard
7 years ago
marnie fernandez
Does madeira thread come in bigger size than "A" and where can I buy some. I looking for Madeira thread in size "D" or close to it.
Forum: rodboard
10 years ago
marnie fernandez
I also looked and could not find any. I looked at Fish Hawk link and did not list any glow thread.
Forum: rodboard
10 years ago
marnie fernandez
anyone use the Madeira glow nylon thread. Is it good for rod building, I think it comes 50wt. I would like to try it on a Heaver that I am going to build next but would like to know if its like the Madeira thread being use for heavy surf rods and saltwater rods. Does it really glow at night. If it does and it is a good thread I might give it a try.
Forum: rodboard
10 years ago
marnie fernandez
I did a search but Doug Cox does not list his email. Is there anyone on the forum that knows him that would be able to ask him if I could have his email address. I would just like to ask some question about a rod lathe he made and posted on the photo section.
Forum: rodboard
10 years ago
marnie fernandez
anybody know how I can contact with forum member Doug Cox via email. I would like to ask him questions on a rod lathe.
Forum: rodboard
10 years ago
marnie fernandez
have a question about the mediera thread being @#$%& on @#$%&. it says medeira embroidery thread. is this the same thread use for Rod building. I do want to place a bid but not sure if it is for rodbuilding?
Forum: rodboard
10 years ago
marnie fernandez
1st question. when doing decorative wraps how much thread tension or should I say how tight should I be pulling the thread when I go up and down the rod? 2nd question. I have a rod which has a circumference of 95mm large blank. is this blank to big for the butt alignment tool for marking the axis. I will be building heavy surf rods and wanted to purchase a butt alignment tool but dont know if
Forum: rodboard
10 years ago
marnie fernandez
I hope this aint a stupid question, but how do you use the madiera spool thread 40wt when doing decorative wraps. does it attach to the rodsmith wrapper thread carriage. the madiera spool is huge so how can you do butt wraps with it or is the spool more for guide wraps.
Forum: rodboard
11 years ago
marnie fernandez
Does anyone know if the PAC BAY RW-3XL can hold a 4oz gudebrod thread spool. I email acid rod this question as I would like to place an order through them but I never got any reply from acid rod.
Forum: rodboard
11 years ago
marnie fernandez
Thanks for the reply's. Billy i sent you an email
Forum: rodboard
11 years ago
marnie fernandez
I looked all over the net and even GUSA website and could not find these ulua rod blanks. supposely they made a special run on these 13' 2piece ulua surf rod blanks for the Hawaii market. Billy Vivona posted a reply to the thread but I looked in the catalog and doesnt list these blanks. can someone point me in the right direction as to how i can get info or get these blanks. .............
Forum: rodboard
11 years ago
marnie fernandez
Thomas, I would like to build one also. where can i get a blank like this.
Forum: rodboard
11 years ago
marnie fernandez
Tom Kirkman Wrote: ------------------------------------------------------- > Action is never "heavy" but rather, slow, medium > or fast, or a degree on the AA measurement of the > Common Cents System. Sounds like what you want is > a fast action, heavy power surf blank. > > ............. sorry for the error. Yes that what Im looking for. Hopefully someone o
Forum: rodboard
11 years ago
marnie fernandez
Can anyone recommend a 13ft or little longer, needs to be 2 piece very stiff blank that only bends in the upper portion of the rod and can throw 9-10oz N bait If I have to, with no problem. I need this blank to be very very stiff, XXheavy action.
Forum: rodboard
11 years ago
marnie fernandez
where can we get this HI-vis spray paint? I was thinking spraying it on the whole blank. is this possible or do I need a flex paint.
Forum: rodboard
11 years ago
marnie fernandez
mark barkley, I figured how to unhide my email. its good to go know.
Forum: rodboard
11 years ago
marnie fernandez
Mike Barkley Wrote: ------------------------------------------------------- > Marnie, > > If you unhide your e-mail (or e-mail me) I can > help you. I don't want to make a post as long as > it would need to be. I have only post a few on this rodbuilding.org site but how do you unhide your email address.
Forum: rodboard
11 years ago
marnie fernandez
thanks again for the reply. I am going to get the video.
Forum: rodboard
11 years ago
marnie fernandez
thanks for the replies. Tim I will send you an email
Forum: rodboard
Pages: 12Next
Current Page: 1 of 2

Webmaster