SPONSORS
2024 ICRBE EXPO |
Rodbuilding classes
Posted by:
marnie fernandez
(---.mycingular.net)
Date: February 14, 2012 01:02PM
Im in Las Vegas any rodbuilding classes where can I see or learn how to do decorative wraps ( spiders, fish, and the wraps in Billy's book) from start to finish. Re: Rodbuilding classes
Posted by:
Todd R. Vivian
(---.se.biz.rr.com)
Date: February 14, 2012 02:31PM
Marnie,
While there are a lot of extremely talented builders on the West Coast I'm don't currently know of any Gatherings or Shows in that neck of the woods scheduled for this year. It sounds like you need to schedule a trip to either the ICRBE or one of the NERBS Gatherings. Todd Regards, Todd Vivian Mud Hole Custom Tackle todd@mudhole.com Re: Rodbuilding classes
Posted by:
Neil Sanft
(---.radianmi.com)
Date: February 14, 2012 03:39PM
Marnie -
You can't go wrong attending a NERBS gathering. I've attended a few and I can't explain how much information you walk away with. You will learn more in one day than reading all the books and watching videos on youtube. Billy is by far the most advanced rod builder I know - he is a true "custom" rod builder! First thing I would do is purchase his book (if you haven't already) and read it a few times. The most important information is in the first 12 pages so its pretty easy reading. Go to the NERBS website and check it out. Good Luck Neil Re: Rodbuilding classes
Posted by:
Milt deReyna
(---.nc.res.rr.com)
Date: February 14, 2012 09:19PM
Attending a NERBS deal would be the best, but another option: if you're comfortable working with software on your pc, then you should buy Billy's book, and then a copy of Viswrap software from him. You can put the software into single thread mode, and see any wrap in the archives from first thread to last, one at a time. Invaluable. Sorry, only registered users may post in this forum.
|