SPONSORS
2024 ICRBE EXPO |
Results 121 - 150 of 3291
4 years ago
Steve Gardner
I've built several rods using different types of Point Blank- blanks, and every one of them has exceptional vibration/feel.
Your lack of sensitivity has nothing to do with your blank, carbon insert, carbon handle, epoxy, thread, seat or guides.
And every thing to do with the tape insulators you used for arbors
When you use a soft vibration's robbing material (tape) between blank and seat,
Forum: rodboard 4 years ago
Steve Gardner
Herb
You already responded to my email, but in case its easier to track from this sight
I would like a 6.4 oz size
Thank You
Forum: rodboard 4 years ago
Steve Gardner
123. Re: Alabama Rig Rod
Thomas
Neither James or I would stear you wrong
Forum: rodboard 4 years ago
Steve Gardner
Most hobby stores that sell remote control air planes, will have all sorts of barrings in many sizes.
Can get them with plastic rimes on them that are used for landing tires with solid rubber or dense foam tires mounted on them.
Forum: rodboard 5 years ago
Steve Gardner
He was right, and did enough comparison testing to prove it
Forum: rodboard 5 years ago
Steve Gardner
127. Re: Alabama Rig Rod
not till you get a bit. then its all fun
Forum: rodboard 5 years ago
Steve Gardner
With all the great products and materials we have access to in this craft.
I don't understand why any custom builder would use masking tape as an arbor.
Forum: rodboard 5 years ago
Steve Gardner
I do exactly like Mr. Phipps most of the time
The only exception is when I am wrapping 1.5 through 2.5 mm guides, in these situations I will use 2 locking, and 2 or 3 blocking wraps
Forum: rodboard 5 years ago
Steve Gardner
131. Re: Alabama Rig Rod
I'm with James on this one.
Model Color Length Pcs Line Lure Butt TipTop Action Power Weight Application
REVSB710MH-SB Satin Black 7'10" 1 15-30lb. 2-6oz. 0.605 7.5 F MH 4.0oz. Medium Bass swimbaits/Light - medium SW/Alabama Rig
Forum: rodboard 5 years ago
Steve Gardner
size A or silk.
the lighter you keep that rod the better it will perform.
Forum: rodboard 5 years ago
Steve Gardner
Actually have 4 of their guides in the shop. That where given me at one of the ICRBE exposes many years back by Bill Stevens.
couple years after I started experimenting with Micro guides
Bill suggesting that they might be a viable option when looking for a taller striping guide when using Micro's.
Did not like the quality of what I saw or the extra weight created by the solid frames, so
Forum: rodboard 5 years ago
Steve Gardner
134. Re: Rod Lathe Survey
1. ALPS
2. Pac Bay
3. home made hand wrapper
Forum: rodboard 5 years ago
Steve Gardner
David
You are most welcome
One of the blessings of where I live (NC), is that the lakes don't close up except for some occasional flooding which makes accessing the ramps impossible.
Forum: rodboard 5 years ago
Steve Gardner
James Taylor is usually the only one who checks this web site on a consistent basis, and is actually out of the the office. Which is why he has not responded yet.
I emailed him and asked him to take a look at this thread when he gets back. So he should be responding in the next couple of days.
Bill and some of the other staff are presently out of town working shows, Bill told me the other d
Forum: rodboard 5 years ago
Steve Gardner
David
look and see if you notice any traces of a glue joints on the inside of seat and graphite tube.
I've been using these seats since before they were even on the market. (during testing and evaluation phase)
With one exception I've never epoxied one, and have never had a problem with them coming loose once installed.
The lone exception was on one that came loose while reaming (got stu
Forum: rodboard 5 years ago
Steve Gardner
Mr Unger
Don't know what type of fishing you do, BUT if it involves sensitivity in respect to "feeling what is going on at the other end of your line. Whether that be feeling your bait working, or the fishing biting
I have THREE pieces of advise
1. DON'T DO IT
2 .DON'T DO IT
and in case your not sure
3. DON'T DO IT
Yes most golfers have for years used Winns grips with great succes
Forum: rodboard 5 years ago
Steve Gardner
139. Re: Applying decals
except for line ( 5 )
And the first step of line ( 6 )
I do the same as Mr. Talmo
Forum: rodboard 5 years ago
Steve Gardner
unless you are building for "pretty"
and if you don't need the for grip for holding onto.
And if you want to better take advantage of the sensitivity that MVT seats can provide.
I would suggest staying with the standard hood and not use a for grip
Forum: rodboard 5 years ago
Steve Gardner
poker chips.
thin them down if you want narrower then they are
Forum: rodboard 5 years ago
Steve Gardner
144. Re: Batson blanks
Batson supplies some of the finest blanks on the market. In my opinion better then the blanks you are comparing them to.
Some of them made in the USA and some from other countries.
But regardless of were they come from, they stand behind their products 100%
They have one of the best reputations in the industry with their customer service.
As far as I'm concerned there is NO " buy at yo
Forum: rodboard 5 years ago
Steve Gardner
been using 3 mm micro running guides on flipping sticks to over 10 years now. All spiral wrapped
they work great.
I use the Batson ALPS guides, and have yet to have one of them fail
Here are a couple old threads from 10 years ago, that may help you out
the test done in thread below was on a frog rod that I some times flip with, (still use that particular rod today) and continue to use that
Forum: rodboard 5 years ago
Steve Gardner
Thomas
read the last post on that page from 11 years ago.
I use 12 lb also
Forum: rodboard 5 years ago
Steve Gardner
also good for polishing unpainted blanks
learnt that from Mr Bill Stevens
Forum: rodboard 5 years ago
Steve Gardner
Fuji does not see improved results smaller then 4's
But I have done much testing with 1.5's- 2's.- 2.5's- 3's-and 3.5's
With different results. that have showed marked improvements in performance.
Forum: rodboard |