SPONSORS
2024 ICRBE EXPO |
Results 241 - 246 of 246
10 years ago
David Parsons
241. pro paste fast set
Just opened a new jar set.of pro paste fast set 15 min Part A was hard had trouble scraping some out put some heat on it and it soften a little mixed it with part B for a test it set up. MY shop is about 60 degrees when i'm not there I only use this one time before and part A seemed to be thicker than the slow set type.But not this thick.
my question is it the room temp
will this be okay to
Forum: rodboard 10 years ago
David Parsons
I take a wood dowel Put a cut in the end with a saw then i take a piece of roll sand paper put it in the slot and spiral dowm and tape off at the end .It is then easy to change out the sand paper when needed.
Forum: rodboard 10 years ago
David Parsons
About 5 years ago I got the Pac bay wrapper since then I replaced eyes on about 100 t0 200 rental rods each year for a fleet of party boats .It workes great the only thing I have done is replace the drive belt-oring.i think twice .The dryer motor I think I used it once as I have a Quad dryer and coat 4 rod at a time .
Forum: rodboard 10 years ago
David Parsons
My neighbor that I have fixed a rod for just gave me a copy of Boyd Pfeiffer tackle making book.it looks like a great book.
christmas does come more than once a year
Forum: rodboard 10 years ago
David Parsons
I guy at work gave me a hard back copy of advanced custom rod building by Dale Clemens.The more I read it I learn things that i would never think about about rod building.What other books are good?
Forum: rodboard 10 years ago
David Parsons
I have had good luck with a small cut off wheel doing that on reel seats
Forum: rodboard |