SPONSORS
2024 ICRBE EXPO |
Results 961 - 990 of 1255
9 years ago
Bill Sidney
the 2 part epoxies if not mixed the correct way, you can get some smoke from it an it will have cracks in it , this I know don't ask why
Forum: rodboard 9 years ago
Bill Sidney
962. Re: Butt Cap
no help here , make something it will work
Forum: rodboard 9 years ago
Bill Sidney
well I want to thank Geoff Staples in taking the time an filling us in on the fix with the power wrapper , it can be applied to drying motor's
that I have jaws , my motor did the same thing an my fix was useing a lot of masking tape on the rod wrapped very loose so it don't walk out of my drying motor jaw's just a tidbit SID
Forum: rodboard 9 years ago
Bill Sidney
965. Re: Butt Cap
not sure just what you want is it the whole but cap ? or just the last 1/8 inch of the butt . if it is the whole end cap about 2 inch long just about any supplier has them that is all
I know if it is the last 1/8 inch beats the crap out of me so please explain what you SID
Forum: rodboard 9 years ago
Bill Sidney
like every one say's if it is groved, pop it off an put a better one on , it should last a lot longer we hope, SID
Forum: rodboard 9 years ago
Bill Sidney
I am no expert but I think you are selling your self short with that buddget if you want to be better than your friends the buddget is light by about $50 I think
Forum: rodboard 9 years ago
Bill Sidney
you can try hair dryer, put it in a plastic bag an put in boiling water, or buy a hear gun or rent one it would be a lot less trouble to buy a new reel seat my 2 cts
Forum: rodboard 9 years ago
Bill Sidney
969. Re: Major uh oh....
just my 2 CTS but time is money to me even if it is for my fishing
Forum: rodboard 9 years ago
Bill Sidney
give them a call an ask if they sell them on who supplies them ??? just an idear
Forum: rodboard 9 years ago
Bill Sidney
971. Re: Stuck Ferrule
...........................................
Forum: rodboard 9 years ago
Bill Sidney
972. Re: Stuck Ferrule
if nothing works for you use vice grips put the plyers on the male part with one wrap of masking tape under the plyers jaws , as it should be tight but still loose on the male part , then hold the male part on a heavy bench , then have some pull on the femal part , then put the plyers h against the femal section an hit with a hammer in the direction you want the female part to go , the sudden
Forum: rodboard 9 years ago
Bill Sidney
what I got back from ANGLERS WORK SHOP I ASKED THE QUESTION , they did not say where it will be sent to
"""" A small interruption in shipping from the 12th to about the 26th when all the inventory is packed up and moved to new location. """""
Thank you,
Dave Lyons
Anglers Workshop
Forum: rodboard 9 years ago
Bill Sidney
974. Re: Branding cork
but the COW'S BUTT is a little plyable [ softer that cork handle ] it is doable but don't think the brand mark would be the same color all over
just my 2 CTS
Forum: rodboard 9 years ago
Bill Sidney
do it under the handle no one will be able to see it when finished
Forum: rodboard 9 years ago
Bill Sidney
sorry to here, I am hoping it will not interupp the service much they did a good job [ for me ]
Forum: rodboard 9 years ago
Bill Sidney
not all cork is the same tan, look at a few different suppliers an get a little bit from each supplyer that way the lines will stand out,
you cant stane cork, what ever you but on it will fade over time, or get some colored cork rings an go fron there ,
if you do go with the colored rings make sure that the frist an last ring is of the rubberised type, the other partical cork will break
Forum: rodboard 9 years ago
Bill Sidney
point me in the direction for a 2 or 3 pice fly rod 5 or 6 WT 7.5 t0 8.5 FT. [ ftist rod ] that would be a good rod for a grand kid 10 years old [ durable ] I hope
thanks for the help
Forum: rodboard 9 years ago
Bill Sidney
hope it works out for you, do let us know the out come , SID
Forum: rodboard 9 years ago
Bill Sidney
I will get one spool an try it out the results of the one spool will tell me if I purchest more or stay with my old brand , [ try it you might like it ]
Forum: rodboard 9 years ago
Bill Sidney
well being that you just drop the bait / lure down the hole a use a a larger eye as your stripper guide [ insert ring type ] # 8 or # 10 an"' kiss it""
[ keep it simple s&&& ] not to tear you down but the kiss princible has been around for a long time ,
hope it don't affend you , flyrod guids just wire an don't stand up braid or mono. an will wear groves fairl
Forum: rodboard 9 years ago
Bill Sidney
what ever glue you use it will make it easyer if you use ony one type of glue for the project , I use slow cure epoxie for the compleat job, when I build on the blank ,
Forum: rodboard 9 years ago
Bill Sidney
DO ABOUT 2 TO 2.5 X THE DIAMATOR FOR THE WRAP. AN CLOSE TO THE END.
BUT 1/16 INCH UP WILL NOT CAUSE A PROBLEM AN THE WRAP WILL NOT COME OFF ON YOU .
Forum: rodboard |