I wanted to share something positive, anytime I need to contact Nfc Steve pitcock is always there to help me. I respect and admire his customer service. Have to appreciate good people and thought I would share that with you. Have a great day everyone.
Forum: rodboard

Live dealing with Voodoo, amazing customer service and good prices. Casey is a champ
Forum: rodboard

Thanks Tom and everyone really appreciate this forum
Forum: rodboard

If it's the same blank it can be different stiffness. Same model
Forum: rodboard

Tom Kirkman Wrote: ------------------------------------------------------- > Ferrule fit is only one problem you may have with > this type section replacement. > > ......... Fits really good not sure what you mean, the original I am thinking that is why it broke in that area. It was only in 1.25 inch's. It broke around there, I have three Hm blanks, they all were 2.5 inch.
Forum: rodboard

Thanks guys
Forum: rodboard

I have a few NFC Hm blanks, I broke one and I want to use the midsection of the other blanks I have. What should be the ferrule measurements. I measured with the new one it seems to go a quarter inch more than the broken one. Is that ok. Cause it's a mid section I have to account for tip and butt. I have 2 3/4 for the butt and 2 1/4 for the tip. That's the amount that goes in. Thanks in Advance
Forum: rodboard

I use a lighter and heat while pulling never had a problem. I use a drill bit to clean out the epoxy out of the tube.
Forum: rodboard

I use the u-40 cp I like it alot, I use to use the gudebrod orginal formula, stuff was the best Imo. Not sure why they changed the formula, I use cp for my normal nylon. I find it has to be less than a year old or it leaves alot of blotches. People had told me it's from the threads not being pack tight enough but it wasn't the case for me. I put three thin coats works great and haven't had it giv
Forum: rodboard

Thank bud for your info appreciate it
Forum: rodboard

NFC has some great blanks on sale
Forum: rodboard

Casting is still good
Forum: rodboard

Hi Everyone I had a question Batson size 16 has been back ordered for 2 months anyone ever do 20 to 12 for a float rod. Thanks in advance
Forum: rodboard

Did u look at that guide
Forum: rodboard

Thanks for all the answers I guess I am being to picky
Forum: rodboard

I didn't purchase this guide I got a few off some friend that got them from a Rapala Concept Ti. I usually wrap float fishing rods, not a newbie. Just trying to see if anyone has any good transition ideas. I am building a bass rod for the first time, 90% I use guide tops on float rods
Forum: rodboard

Hi everyone, anyone have any ideas on how to tie this tip top on. The step is very high. Was thing of wrapping a thread underneath. Thanks in advance
Forum: rodboard

Anyone build the SJ it looks like more power?
Forum: rodboard

Is that the Mb or SJ Thank you
Forum: rodboard

Looking to order Nfc blank for pitching and flipping grass. I like the sounds of the x-ray blank. 1/2 to 3/4 jigs. Deep weedline fishing tournaments. Any suggestions on which blank. thank you in advance.
Forum: rodboard

Thank you
Forum: rodboard

Anyone have the weights, are the k frames lighter then the y frame
Forum: rodboard

I find that I applying a bit thicker and use a little heat on the wrap and it thins out Nicely
Forum: rodboard

Just for finish I plan to use it for.
Forum: rodboard

I agree with bill I do the decal on its own. I do lengthwise strokes. I do the 180 on the decal for 15 mins just to make sure there's no heavier spots. Then I put it on a 9 rpm dryer.
Forum: rodboard

I agree with bill I do the decal on its own. I do lengthwise strokes. I do the 180 on the decal for 15 mins just to make sure there's no heavier spots. Then I put it on a 9 rpm dryer.
Forum: rodboard

I agree with bill I do the decal on its own. I do lengthwise strokes. I do the 180 on the decal for 15 mins just to make sure there's no heavier spots. Then I put it on a 9 rpm dryer.
Forum: rodboard

I only heat my epoxy when I see the white crystals in the bottles. I just mix and apply.
Forum: rodboard

I find that I need three coats, after the second coat I find that the threads at the edges are not fully covered. I use pro kote med build.
Forum: rodboard

Thanks I will give it a shot
Forum: rodboard