SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 34
10 years ago
frank kurant
1. Re: Rod Fix
a heat gun should soften up the wraps so you can start there,no?
Forum: rodboard 10 years ago
frank kurant
it's almost impossible in my opinion to get a good looking job on a rebuild like this without stripping the whole rod,especially when the old rod had underwraps.It's much easier to refinish the whole thing and the end result will look a lot better, and also be more durable.
Forum: rodboard 10 years ago
frank kurant
I do a lot of trolling on Lake Champlain and other smaller lakes in Vermont for slamon and lakers. Most people here like an 8 foot or longer rod with a slow action that will bend all the way to the reel(like a big C). probably a composite blank would be best that is both strong and resilient. there is a lot of stress to the rod when it is loaded up in a downrigger release when the fish hits and t
Forum: rodboard 10 years ago
frank kurant
A friend picked up an old salwater rod in Florida at a yard sale this winter and I discovered it was a hand made custom rod made for a Wayne Smith by Tony Pica,not sure of the spelling, as the names were hand written on the blank. It's a 9' boat rod with somekind of synthetic guideswhich are corroded beyond reuse. Does anyone have any knowlede of this rod maker?
Forum: rodboard 10 years ago
frank kurant
you may be surprised how many fishermen have old rods hanging around that are broken or unused,ask around,I get a lot of them free.,just by asking fishing buddies
Forum: rodboard 11 years ago
frank kurant
If you want to try an air brush get one that handles a lot of volume of paint,I have tried it with my Iwata air brush I use on lures and it just runs out of paint to soon.
Forum: rodboard 11 years ago
frank kurant
8. permagloss
OK,so I have 3 bottles (1oz) of U-40 permagloss,One bottle was solid from top to bottom and the other one was very thick in consistency although I managed to use it. Do I dare open the third one? I know this stuff is good on a rod but I don't think I ever got a bottle that wasn't too old to use,what's up with this stuff and how can I get a new good bottle of PG?
Forum: rodboard 11 years ago
frank kurant
I ran into the same problem with building custom golf clubs,,,,if you add up all the tools and equipment you need and then the extra materials you need ,just in case,then you have to agree that there just ain't no money in it.
Forum: rodboard 11 years ago
frank kurant
I would check with a tackle shop or guide in the area that you are going to fish, those steelies are like rockets and they are smart
Forum: rodboard 11 years ago
frank kurant
12. Re: H-I cane rod
it's in a hard tubular case in a cloth sock and it has 3 different tips
Forum: rodboard 11 years ago
frank kurant
13. H-I cane rod
a friend has an old Horrocks Ibotson bamboo fly rod with the following labels on the rod...Super Cane..H-I...Utica,NY....Horrocks Ibotson....Ike Walton......anyone have any info on this rod? the labels are in good condition ,the windings are kinda dried out and one guide is loose but it seems to be in good condition
Forum: rodboard 11 years ago
frank kurant
I use the little plastic cups that are available at the local drug store,they are the same ones that come on top of some cough syrup bottles,they hold 2 tablespoons and cheap
Forum: rodboard 11 years ago
frank kurant
I'm sorry Tom.I just don't get it. when I go to the photos section there is no place that says new post or any thing else,,,I know I am going to kick myself when It suddenly dawns on me.
Forum: rodboard 11 years ago
frank kurant
18. help with photos
I must be dumb,,,how do I post photos?
Forum: rodboard 11 years ago
frank kurant
I guess it's finally time for me to figure out to post pictures.it may take a while but I will try to get a few pics of this camo rod on here,,,,,,,,,,,frank
Forum: rodboard 11 years ago
frank kurant
20. happy accident
well,a while ago I had a guy that wanted a camoflauge colored 8' boat rod for use on cod and haddock. I got some interesting feedback from this forum,one guy said not to clutter it up with too much camo,but no one got really specific how to color the blank,so here's what I did,I had some Krylon camo paint in spray cans so I let her have it with three colors done in large splotchy areas,then Iet
Forum: rodboard 11 years ago
frank kurant
I made a lathe for turning eva foam grips as my homemade rod wrapper doesn't have enough power, I took an old electric drill apart and removed the motor and just left the gears and the chuck,this I use for only the free spinning chuck,the other end is a cheap electric corded drill (new) that I use for power,In between is 3/8 or 1/2 inch threaded rod with wahers and lock nuts strategically place
Forum: rodboard 11 years ago
frank kurant
22. size E black
I am looking for some size E black nylon wrapping thread,anyone?
Forum: rodboard 11 years ago
frank kurant
is it possible the stuff froze in shipping? and that's why it failed to cure correctly
Forum: rodboard 11 years ago
frank kurant
25. camo rod
OK,,I have a customer that wants a cod rod 8'long and I asked him what colors he likes and he said camo.I already ordered camo grips, I am going to spiral wrap it,too, Any other ideas from members would be greatly appreciated,thanks in advance,,,,,frank
Forum: rodboard 11 years ago
frank kurant
26. Re: High Build
here's an easy way to measure epoxy from a squeeze bottle....I have done this for years and it works for me. I take bottle "A" and squeeze a line on a postcard size card(like the free ones you get inside almost all magazines)...then I take Bottle "B" and squeeze a line the same diameter and the same length as I just did with bottle "A". presto...2 equal lines of e
Forum: rodboard 11 years ago
frank kurant
27. air brushing
as I have a nice Iwata airbrush I use for lurmaking I was wondering where it could be used in rodbuilding,Has anyone used an airbrush to apply Permagloss or other rod finishes?I checked the search and came up with nothing,thanks in advance
Forum: rodboard 11 years ago
frank kurant
another way is to use golf club shafts,,cut the head and the grip off and grind the small end to remove the chrome finish,this will fit in a drill chuck nicely,I used 2 sided tape to adhere the sandpaper to the shaft,golf club shafts made of steel work best and they are cheap and they are already tapered,,,you can usually find old golf clubs at yard sales.I also build golf clubs.
Forum: rodboard 11 years ago
frank kurant
you could buy two identicle seats, one silver and one black, and switch the nuts and collars ,yes?
Forum: rodboard 11 years ago
frank kurant
OK,,,I like it....may take a closer look at the 2-peice blanks,also, thnks again for the info
Forum: rodboard |