SPONSORS
2024 ICRBE EXPO |
Results 301 - 330 of 445
8 years ago
Jay Dubay
While on the subject, On the photo page say I click on {Grips, Handles and Reel seats}, the page opens and I have the { Recent Photos - Grips, Handles and Reel Seats - 32 different photos,} than 16 older photos under that. Then I click on page 2 to move on, And I still get the {same 32 photos as the first page that I already looked at} and the only one's that change are the 16 below that. Is this
Forum: rodboard 8 years ago
Jay Dubay
While on the subject, On the photo page say I click on {Grips, Handles and Reel seats}, the page opens and I have the { Recent Photos - Grips, Handles and Reel Seats - 32 different photos,} than 16 older photos under that. Then I click on page 2 to move on, And I still get the {same 32 photos as the first page that I already looked at} and the only one's that change are the 16 below that. Is t
Forum: rodboard 8 years ago
Jay Dubay
As Jeff suggested above, And one of the few 7'6" not many out their mid price. Jaa
Forum: rodboard 8 years ago
Jay Dubay
Cork grip? I grab with a set of pliers with teeth around the grip {don't squeeze down to hard}, Rock it back a forth and around, The cork will crumble off from the teeth on the pliers , work on small sections at a time, Once the bulk is off pick and scrape off what's left It worked for me. I try to stay away from knifes for my own safety. Jaa
Forum: rodboard 8 years ago
Jay Dubay
Andrew are you sure you want a full carbon grip? I tried one and recently cut it off and put cork with some burnt rings back on, Because it was either cold or hot from the sun, And just plain to hard on my hand all day. With some of these new spinning reel seats with the blank cut out windows I get all the sensitivity I could want. If you do try one I would order one made up from Riley rods He
Forum: rodboard 8 years ago
Jay Dubay
308. Re: Spiral wrap
Robert Gilbertson Wrote:
-------------------------------------------------------
> Getting ready to spiral wrap my first rod. Does
> anyone have a guide spacing chart for spiral wrap
> ( as a starting point ) or do you use the same
> guide spacing and just make the transition around
> the rod?
The same that will work fine. Jaa
Forum: rodboard 8 years ago
Jay Dubay
Im looking for a new vendor since Mud-Hole decided to change the way they list their blanks, Instead of a chart format that everyone in the world use's that is easy to read and compare blanks. Love your web site! And blank listings with chart format!!! But one thing is holding me back you don't sell PacBay Minima Guides and thats all I use. Will you be stocking them in the near future?? Thank
Forum: rodboard 8 years ago
Jay Dubay
Chuck McIntyre Wrote:
-------------------------------------------------------
> Maybe sand the whole thing down as close to the
> blank as you can without going onto the blank.
> Then add the cork over that.
You don't want to sand it off and take a chance of breathing that carbon fiber dust Even with a mask. just my 2 cents and your lungs. Jaa
Forum: rodboard 8 years ago
Jay Dubay
Mine were Not the St. Croix Legend Extreme LXC711HMF but the straight tube type mud-hole sells. I removed and replaced 2 of them with a built up cork Tennessee grip, Like your client, I found them to cold in the Fall and hot in the summer, Also larger dia than I liked. I used a sawzall with a metal cutting blade to remove a 1/2"-3/4" wide section on each side of grip, {top to botto
Forum: rodboard 8 years ago
Jay Dubay
Team colors on a wraps, Then burn the N logo in the cork handle lightly with a fine tip wood burner, either on the front top or sides of grip. That would be pretty cool??? Jaa
Forum: rodboard 8 years ago
Jay Dubay
What is the best hand scroll saw blades for cork # of teeth? I'v been using a Razor saw for the few I have done and it binds alot. Thanks Jaa
Forum: rodboard 8 years ago
Jay Dubay
It would be nice if it were formatted like this simple and easy for our customers as well as us to compare blanks. And it used to be this way,
Forum: rodboard 8 years ago
Jay Dubay
Bob McKamey Wrote:
-------------------------------------------------------
> Gary -- There is a blue border area on the home
> page that has - Brands - listed. When you choose
> to go under the heading , Brands, St. Croix and
> all of the brands we carry will come up. Then
> when you choose St. Croix, there will be links for
> all of their various offerings, by SCV, SC
Forum: rodboard 8 years ago
Jay Dubay
Well that old site needed an upgrade, It was to slow at peak times. But I have to agree I think they could have make it more user friendly. I'm sure it will take weeks to get it fully tweaked, I'll hold my thoughts until then. I wish a few of these vendors would upgrade their sites. Bingham Enterprises would get my business if they had a better site. I just don't have the time to call or e-mail
Forum: rodboard 8 years ago
Jay Dubay
320. Re: sales tax
Yep all depends on your state, Mich internet tax law went into effect this Oct 1, I now have sales tax added by mudhole or any other vendor that I place an order with now, Same with Amazon. Jaa
Forum: rodboard 8 years ago
Jay Dubay
North Fork Composite also has a few 2pc blanks that would also do the job. Jaa
Forum: rodboard 8 years ago
Jay Dubay
322. Re: Struble
Here's some templates for grips you can work with, Should be pretty easy to whip up a 7" cigar grip. Jaa
Forum: rodboard 8 years ago
Jay Dubay
323. Re: MFT Tip Tops
Welcome back, Just do a search on Minima's here, I don't think you will be disappointed, I for one Love them, Strong light and Good prices. Jaa
Forum: rodboard 8 years ago
Jay Dubay
324. Re: Latest build
Looks great Will, You have to love a light weight naked rod after a full day casting! I like to build the same way light weight for fit and function. Good Job My Man!!!
Forum: rodboard 8 years ago
Jay Dubay
327. Re: Sticky epoxy
How long has it been since you applied it ? Try putting it in your car on a sunny day with the windows up or just cracked.
Forum: rodboard 8 years ago
Jay Dubay
Hey Miles! This would build a short stubby fore grip that I think? you are looking for? Is this what you are trying to accomplice? Sorry but I'm having a hard time picturing the problem in my brain today, This would replace the hood and nut you are using now, and this Jay
Forum: rodboard |