SPONSORS
2024 ICRBE EXPO |
Results 91 - 120 of 162
5 years ago
ron zimmerman
I hate to say this but I will anyway . The main thing that keeps me from ordering from your website is lack of pictures . Half the time I dont know what I want until I see it and the other half is I dont know what the product is or looks like from the description . I'm sure you have lots of cool stuff but until I can see what I'm ordering …………………...
Forum: rodboard 5 years ago
ron zimmerman
Yes Ron , I just checked the shorter fiberglass 4wt that I built and it has #1s on it and casts great . I dont know why I didn't check that first before posting . Ones it is . Thanks guys.
Forum: rodboard 5 years ago
ron zimmerman
So like it says this is an 11' 3/4 wt build and while I have the guide placement I dont have the guide sizes . I'm thinking a 10 mm to an 8mm stripper and then 1/0 all the way out to the top . Sound about right ? TIA
Ron
PS: These are single foot guides and its intended use is for swinging streamers and wets .
Forum: rodboard 5 years ago
ron zimmerman
Incorporate the guide and ferrule wrap then static test it .
Forum: rodboard 5 years ago
ron zimmerman
95. Re: Matt blanks
Too late , rod is already built . Whats the process if it wasn't built already ? TIA
Forum: rodboard 5 years ago
ron zimmerman
96. Re: Matt blanks
I dont want to dull the finish I want to make it shine like the wraps w/o coating with epoxy .
Forum: rodboard 5 years ago
ron zimmerman
97. Matt blanks
I have a few blanks that are matt in finish however when I wrapped them they turned shiny at the guides . Is it possible to make the rest of the rod shiny with perma gloss or Cpx ? What would be the process ? As always TIA .
Forum: rodboard 5 years ago
ron zimmerman
100. Re: Archives
I usually use the one on Proofs site and then adjust statically but it doesn't seem to be working right now . I'll try again later . Thx.
Forum: rodboard 5 years ago
ron zimmerman
101. Re: Archives
I'm trying to find the placement and number of guides for an 11' 4wt rod . Search didn't turn that up at least not on the first page .
Forum: rodboard 5 years ago
ron zimmerman
102. Archives
Were are they ? If it's under the director button my browser wont open it .
Forum: rodboard 5 years ago
ron zimmerman
I'm not sure it matters . I caught a fish on the back cast once and still got him in .
Forum: rodboard 5 years ago
ron zimmerman
I put the rod butt in the corner and then raised the tip to the ceiling until it was bending pretty good . Looked like it was a fast action to me but its so darn wimpy . I was going to do the cc thing but no where to anchor eye level or so . Thanks again guys .
Forum: rodboard 5 years ago
ron zimmerman
Thanks Guys , I'll have to get on a ladder as it's a 10' er but it's doable . Thanks again .
Forum: rodboard 5 years ago
ron zimmerman
I received a rod today and it's supposed to be a fast action rod . I don't think it is as it is very wimpy and seems like a slow action to me . Is there a way to determine the actual action ? As always , TIA
ron
Forum: rodboard 5 years ago
ron zimmerman
I had a 3wt 10' rod that I was not thrilled with so I lost the butt section and put reel seat cork etc on third section thinking it would be a good thing . Nada, nope , now way. I absolutely hate it now . Waste of a not so good then but better than now rod .
Forum: rodboard 5 years ago
ron zimmerman
Check out Ye Olde English fly shop in Florida . Brian is a great guy and has some nice blanks . I have his 7'9" 4pc 3wt and it's a good little rod .
Also Matt @ proof sells some nice blanks .
Forum: rodboard 5 years ago
ron zimmerman
114. Re: MHX spey
I was going to buy one but by the time I decided they sold all the 4wt's .
Forum: rodboard 5 years ago
ron zimmerman
Roger ,
I'm thinking a final wet sand and then wrap the rod before the polish for maximum adhesion ? What would you use to polish such a beast ? TIA
ron
Forum: rodboard 5 years ago
ron zimmerman
I purchased an S Glass blank and didn't like the color so I stripped it last night . It turned out a decent looking white that I can see the rings in so I thought I may just keep it that way . My question is , do I need to clear it with something or can I get away with just polishing the blank ? I thought about trying to use an outdoor stain of some sorts or maybe even ritz dye to change the colo
Forum: rodboard 5 years ago
ron zimmerman
118. Re: Pack rod
There's a nice one on an @#$%& site shu-fly 5wt I believe . Reviews are good apparently the ex owner is a rat .
Forum: rodboard 5 years ago
ron zimmerman
I've had that happen and I just cut it off . Not a huge deal IMHO .
Forum: rodboard 5 years ago
ron zimmerman
That rod causes more trouble than it's worth . I don't use mine and haven't since my first build . Set your tension and like David said , back it up and roll your thread back if you have to back up .. BTW , if you're having trouble with the tip top wrapping give me a shout through email or pm and I'll tell you what I stumbled on , works great on crb wrappers . Better yet do a youtube search for t
Forum: rodboard |