SPONSORS
2024 ICRBE EXPO |
Results 2101 - 2130 of 2309
7 years ago
Lynn Behler
Randy, Ross is correct. I have one on the dryer right now. A family friend broke one on a recent trip to Canada and I quick fixed it with thread and nail polish. When we got back I got the rod to properly repair it and he requested I replace them all. Using ALPS xbytlg models which are pretty close to the originals. I was able to start with a #20 stripper instead of the the original #25 and the f
Forum: rodboard 7 years ago
Lynn Behler
2102. Re: Reel dimension help
Tom, I would call Amtak and talk to them. They are very helpful.
Forum: rodboard 7 years ago
Lynn Behler
2105. Re: First Rod Build
Hello Jacob, as I understand it grooving doesn't seem to be much of a issue these days. I would suggest that you might want to put comfort ahead of sensitivity in a reel seat on a crankbait rod. Others may disagree! Good luck with your build. It won't be your last!
Forum: rodboard 7 years ago
Lynn Behler
Randy, I didn't mean to imply you hadn't read up on finish methods, it's just that the search feature is often overlooked. Honestly though, I use the straw method both on the finish after mixing and also on the wraps once they are coated, and I have some finish issues myself from time to time, but never with bubbles. Lynn
Forum: rodboard 7 years ago
Lynn Behler
I would suggest doing a search on finish or epoxy application, all dates. That should answer any and all finish questions. Lynn
Forum: rodboard 8 years ago
Lynn Behler
2109. Re: measuring rings
Bill, seems like common sense is largely a thing of the past, sorry to say. Lynn
Forum: rodboard 8 years ago
Lynn Behler
2110. Spiral Wrapped 2 pc.
Are there additional concerns to consider when spiral wrapping a 2pc. casting rod, or do you treat it as if it were one pc. I guess my concern regards ferrule vs guide location as it is an 8ft. rod with only 1 guide on the butt section. The blank's rated up to 4oz. The butt guide will be a double ft. Minima 3 size 10. ( I also have a couple double ft. sz.6's here.) from there it goes down to Pac
Forum: rodboard 8 years ago
Lynn Behler
American Tackle assured me that moving the stripper +/ - an inch or so will not effect performance. Maintain recommended spacing for next 2 and static test from there. Measure from spool lip to highest point of large ring. (the foot being the lowest.)
Forum: rodboard 8 years ago
Lynn Behler
2112. Re: Dragon skin
I also use drywall tape, with excellent results.
Forum: rodboard 8 years ago
Lynn Behler
2115. Re: matte finish
O.K. I answered your question in more detail on the other forum. Once I read it I figured you might be the same guy. Lynn
Forum: rodboard 8 years ago
Lynn Behler
I can't seem to find this topic in the FAQ list. I'd like to see it. Have to do this soon, and I'm a cork or nothing guy.
Forum: rodboard 8 years ago
Lynn Behler
Class, If this sort of behavior continues there will be no recess tomorrow.
Forum: rodboard 8 years ago
Lynn Behler
2118. Re: Handle length
Check out Tackle Warehouse. All handle lengths are listed.
Forum: rodboard 8 years ago
Lynn Behler
2119. Re: matte finish
Mark, would you be also known as the Smokin' Ohio Butcher? Lynn
Forum: rodboard 8 years ago
Lynn Behler
2120. Re: Frustrated Newb...
I have one rod blank (among many) I think is wonderful. I've rebuilt it 4 times so far over the years. I learn something each time, and each time I screw it up less. It's a trial and error thing. Once you do a few the first will look lame to you,( if you're not a prodigy), which I"m not. Oh, excuse me off topic. I've reached the point where I make my own winding checks from wrap finish and
Forum: rodboard 8 years ago
Lynn Behler
2122. Re: Contest
Thanks for the reply. And as Ladd asked, what city? Congrats Jerry. Which one are you going for?
Forum: rodboard 8 years ago
Lynn Behler
2123. Contest
Still wonderin' about that Point Blank contest.
Forum: rodboard 8 years ago
Lynn Behler
You could paint the blank white where the wraps will be and wrap over it.
Forum: rodboard 8 years ago
Lynn Behler
2125. Point Blank
I don't recall reading about a result in the Point Blank contest, is it ongoing or did I just miss it?
Forum: rodboard 8 years ago
Lynn Behler
2126. Re: Winding checks
They say you learn something new every day. Today I learned that Custom Rod Handles is located about a thousand yards from my house and I've driven by it enough to recognize it in the street view photo. Thanks Roger
Forum: rodboard 8 years ago
Lynn Behler
2127. Re: Epoxy and heat guns
Try the search feature regarding this topic , probably keep you reading till Easter.
Forum: rodboard 8 years ago
Lynn Behler
Just to be clear, I rotate by hand on the 180 for about the 1st hour or so then put on the dryer for 4 hours, so 5 hr.s total. As stated check the leftover finish in the cup. Lynn (I'm the guy who replied to Donald R. Campbell's original post)
Forum: rodboard |